Register your product and get support at www.philips.
1 Important Safety Notice 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Prepare the remote control Connect speakers Connect power Auto install radio stations Set clock Demonstrate features Turn on 4 Play Play disc Play from USB Adjust sound Basic play operations 5 Play iPod/iPhone Compatible iPod/iPhone Load the iPod/iPhone Charge the iPod/iPhone Listen to the iPod/iPhone Remove the iPod/iPhone 6 Listen to radio Tune to a
1 Important Safety f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Install all batteries correctly, + and - as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. Batteries (battery pack or batteries installed) shall not be exposed to * ; % the like. & & & o Apparatus shall not be exposed to dripping or splashing.
This product complies with the radio $ J Community. Your product is designed and manufactured # @ $ ? % which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Congratulations on your purchase, and # Q V ? ! support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit m a l b c d k j i h e f g a & Open or close the disc compartment. b SOURCE & Select a source: Disc, USB, tuner, Dock, or MP3 link. c DBB & Turn the dynamic bass enhancement on or off. h MP3-LINK & Connector (3.5mm) for an external audio device. i iR sensor & Detect signals from the remote control (always point the remote control towards the iR sensor). j d VOL +/& Adjust volume. & Adjust time. & Start or pause play. / & Skip to the previous/next track.
d & & & a Eng l i s h c CD & Select disc source. Overview of the remote control / Skip to the previous/next track. Search within a track. Tune to a radio station. e MP3 LINK / USB & Select USB device source. & Select external audio device source. b c CD FM PRESET/ALBUM s r q d f DISPLAY & Select display information during play. g & Start or pause play. h VOL -/+ & Adjust volume. & Adjust time. MP3 LINK e USB DOCK i Numeric keypad & Select a track from a disc directly.
q OK & [ < & For FM radio, select stereo or mono sound output. r PRESET/ALBUM / & Skip to the previous/next album. & Select a preset radio station. & Navigate through iPod/iPhone menu. s FM & Select FM radio source. 3 Get started Caution & Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Eng l i s h Connect speakers Note & For optimal sound, use the supplied speakers only. & Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the < Insert the speaker wires completely into the speaker input sockets on the back of the unit. R+ L+ Auto install radio stations – – When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply.
Set clock Demonstrate features In the standby mode, press . » [WELCOME TO PHILIPS] (welcome to Philips) scrolls on the display. Note & You can set the clock in standby mode only. 1 2 3 Press to switch the unit to standby. Make sure that --:-- (or clock) is displayed. Press and hold PROG/CLOCK SET to activate the clock setting mode. » [CLOCK SET] (clock set) is displayed. » The 12 hour or 24 hour format is displayed. 4 Press / or VOL -/+ to select 12 hour or 24 hour format. 5 Press PROG/CLOCK SET.
4 Play Eng l i s h Adjust sound During play, you can adjust volume through following operations. Play disc Key VOL +/- 1 2 Press CD to select the disc source. DBB 3 Insert a disc with the printed side facing outward, and then press to close the disc compartment. 4 Press on the unit to open the disc compartment. If the disc does not play, press & To stop play, press . DSC . Function To increase/decrease the volume. To mute/restore sound. To turn on or off dynamic bass enhancement.
REPEAT/SHUFFLE To select a repeat play mode: : play current track repeatedly. : play all tracks repeatedly. : the current album is played repeatedly. : all tracks are played in a random order. Press or Press REPEAT/SHUFFLE repeatedly to return to normal play. You can also use numeric keys to select a track directly. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, in the stop position, press PROG/CLOCK SET to activate the program mode.
Listen to the iPod/iPhone 1 Push the lock key to open the lid of the dock. 1 Press DOCK to select the iPod/iPhone source. 2 Load the iPod/iPhone onto the dock. 2 Play the selected track on your docked iPod/iPhone. & To pause/resume the play, press . & To search during play: press and hold / , and then release to resume normal play. & To scroll through the menu, press / .
6 Listen to radio Program radio stations manually Note & You can program a maximum of 20 preset radio Tune to a radio station 1 2 stations. Press FM. Press and hold / over two seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. & To tune to a weak station, press / ? ? reception. & ; $ ?% OK on remote control repeatedly to select stereo or mono sound.
7 Other features & Alarm timer is not available in MP3 LINK mode. & If DISC/USB/iPod/iPhone source is selected, yet no disc Set the timer & & This unit can be used as a timer. The disc/tuner/ USB/dock is activated to play at a preset time. is placed or no USB/iPod/iPhone connected, the system switches to the tuner source automatically. If iPod/iPhone playlist is selected as the alarm source, you need create a playlist called "PHILIPS" in your iPod/ iPhone.
Play from an external device You can also listen to an external audio device through this unit. 1 Press MP3 LINK to select the MP3 link source. 2 Connect an MP3 link cable to: & the MP3 LINK connector (3.5mm) on the unit. & the headphone connector on an external device. 3 Start to play the device (see user manual of the device). Headphone Plug headphones (not supplied) into the connector on the unit to listen through the headphones.
Tuning Range Tuning grid FM sensitivity - Mono Total Harmonic Distortion Signal to Noise Ratio Number of presets FM: 87.5 - 108 MHz 50 KHz 26 dB & & <2% & >55 dB 20 (FM) Speakers Speaker Impedance Speaker Driver Sensitivity 4 ohm 2 X 3" full range >82 dB/m/W USB playability information Compatible USB storage devices: & > = ? ] > < USB1.
9 Troubleshooting Warning & Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before $ @ ; < ! unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
̻Ճሙ 1DPH RI WKH 3DUWV ఙർఙࠂྠ᠂ਾϾዼ +D]DUGRXV WR[LF 6XEVWDQFH ధ 3E /HDG ܌+J 0HUFXU\ ᬄ &G FDGPLXP ࡒ۴ &KURPLXP أᜌ৷Ъ 3%% أᜌفЪ 3%'( +RXVLQJ ທक़ 2 2 2 2 2 2 '9' &' ORDGHU '9' &' ܿދ ; 2 2 2 2 2 /&' 3DQHO ၅ࣚ૯ϴ ; ; 2 2 2 2 /RXGVSHDNHUV ঝϗ֊ჱ 2 2 2 2 2 2 3:%V ϴቊࡵ ; 2 2 2 2 2 $FFHVVRULHV 5HPRWH FRQWURO FDEOHV ࡵڼIJီ३చĶ ჻ཐĶ৹ࢨཐij ; 2 2 2 2 2 %DWWHULHV LQ 5HPRWH &RQWURO =Q& ီ३చԁ ; 2 2 2 2 2 ¾ń њ൙ۂႹႹݡ༂ᇍᄡۂҊࡵෲႹबᇍҏਜᇓ֩ݧब
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DCM1070_93_UM_V1.
