Register your product and get support at DCD3020 www.philips.
1 Important Safety Notice 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Place the unit Connect speakers Connect FM antenna Connect audio cables Connect video cables Connect an external audio device (optional) Connect power 4 Get started Prepare the remote control Turn on Set clock Adjust brightness of display panel Find the correct viewing channel Select the correct TV system Change system menu language Turn on Progressive Scan
1 Important Safety g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, ! " # $ ! % & that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Install all batteries correctly, + and as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. The batteries shall not be exposed to excessive heat such as sunshine, # ' $ $ $ o Apparatus shall not be exposed to dripping or splashing.
Notice + % device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Type plate English # Q >Z [ \ > # + Q >Z video. Visit divx.com for more information and = # > + # Q >Z videos. ABOUT DIVX VIDEO-ON-DEMAND: This Q >Z [ \ > ! % in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
2 Your DVD Micro Theater You can play DVD discs marked with the following region code: DVD region code Countries Russia Congratulations on your purchase, and = # ? # _ ##+ ! support that Philips offers, register your product at www.philips.com/welcome.
English Overview of the main unit g h i a b c d e f j o k l n m a c $ Turn on the unit, or switch to standby mode. b PRESET +/$ Select a preset radio station. $ Skip to the previous/next album. / $ $ $ $ $ Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Navigate through iPod/iPhone/iPad menu. Adjust time.
d $ Stop play. e SOURCE $ Select a source: DISC, FM, USB, DOCK, AUX IN, or MP3 LINK. Overview of the remote control f $ Open/close the disc compartment. g Dock for iPod/iPhone/iPad h $ USB socket. $ Start or pause play. i j VOLUME + / $ Adjust volume. k Display panel $ Show current status. l Disc compartment m MP3-LINK $ Connect external audio device. n $ Headphone socket. o STANDBY a $ Turn on the unit or switch to the standby mode. b Source selection keys $ Select a source.
/ $ $ $ $ $ $ ( / & Search in a track or disc. Skip to the previous/next track/title/ chapter. For menus, navigate left/right. Select a preset radio station. Rotate a picture. Adjust time. e SYSTEM/MENU $ Access or exit the system setup menu. f $ Start or pause play. g PBC $ Turn on/off the playback control. h $ Stop play. i DSC $ Select a preset sound setting. j DBB $ Turn on or off Dynamic Bass Boost (DBB) sound. k Numeric keypad $ Select a title/chapter/track directly.
3 Connect Insert the speaker plugs to SPEAKER OUT (L and R) sockets on the back of the unit. Place the unit Connect FM antenna Tip $ For optimal reception, fully extend and adjust the position of the antenna. 1 2 $ For better FM stereo reception, connect an Place the unit near to the TV. Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.
Connect an audio cable (red/white - not supplied) to: $ the AUDIO OUT (L and R) sockets on the back of the unit. $ the audio input sockets on the audio device. Connect the composite video cable (supplied) to: $ the VIDEO socket on the back of the unit. $ the video input socket on the TV. TV TV L LINE IN R Connect video cables You can select the best video connection that your TV supports. $ Option 1: Connect through a composite video (CVBS) cable (for a standard TV).
Connect a progressive scan TV through component video for higher quality video. 1 Connect component video cables (red/ blue/green - not supplied) to: $ the component (Pb/Cb, Pr/Cr, and Q& sockets on the back of the unit. $ the component input sockets on the TV. TV Option 2: Connect through the MP3LINK socket Connect an MP3 link cable to: $ the MP3-LINK socket on the front of the unit. $ the headphone socket on the external audio device.
4 Get started English a Caution $ Use of controls or adjustments or b performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Turn on Press . » The unit switches to the last selected source. Switch to standby mode or Eco power standby mode Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. Adjust brightness of display panel In standby mode, press DIM repeatedly to select different brightness levels. Find the correct viewing channel 1 2 Switch to ECO standby mode: Press and hold for more than 3 seconds. » The backlight on the display panel turns off.
[Multi] - For TV that is compatible with both PAL and NTSC. 5 To return to the previous menu, press RETURN/TITLE. 6 To exit the menu, press SYSTEM/MENU. English $ Change system menu language 1 2 3 Press SYSTEM/MENU. 4 5 Select a setting and then press OK. Select [General Setup]. Select [OSD language], and then press . To exit the menu, press SYSTEM/MENU. Turn on Progressive Scan Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system).
5 Play Caution $ Risk of damage to the unit! During play, never move the unit. To access or exit the menu manually: 1 Press DISC/MENU. \ ^_` z {! (| + _ ! {|_& ) < }*~ !(& The PBC feature allows you to play VCD interactively according to the menu screen. 1 Play a disc During play, press PBC to enable/disable playback control. » When PBC is enabled, the menu screen is displayed. » When PBC is disabled, normal play is resumed.
Play a slideshow with background music You can play DivX (Ultra)/MP3/WMA/ ? # [QJ { & recordable DVD or USB storage device. # + ?{ # JPEG photos simultaneously. 1 2 Select a source. $ For a USB storage device, press USB. $ For a disc, press DISC. Insert the USB storage device or disc. » The play starts automatically. 1 2 Press to stop play. Press / to select a folder, and then press OK ' $ To return to previous menu, press RETURN/TITLE.
Search by time or title/chapter/track number 1 2 During video/audio play, press GOTO. Enter the desired time or number. $ # & # + position in sequence of hour, minute, and second. $ # { { # & the title/chapter/track number. » Play starts automatically at the selected point. Resume video play from last stopped point Note Slow-motion play During video play, press SLOW to select a slow backward/forward speed. » The sound is muted.
Load the iPod/iPhone/iPad English 6 Play iPod/ iPhone/iPad When the iPod/iPhone/iPad is docked on this Micro System, you can listen to music from the speakers. Note $ No audio output from the headphone jack in this situation. Compatible iPod/iPhone/iPad The unit supports the following iPod/iPhone/ iPad models.
Listen to the iPod/iPhone/ iPad 1 Make sure that your iPod/iPhone/iPad has been loaded securely. 2 Press DOCK to select iPod/iPhone/iPad source. 3 Play audio on your iPod/iPhone/iPad. $ To pause/resume play, press . $ To skip to a track, press / . $ To select a track, press / to select an item, and then press OK to ' Remove the iPod/iPhone/iPad 1 2 Pull the iPod/iPhone/iPad out of the dock. 22 EN Press down to hide the dock.
Program radio stations manually Tip Note $ Position the antenna as far as possible from TV, VCR or other radiation source. $ You can program a maximum of 20 preset radio stations. $ For optimal reception, fully extend and adjust the position of the antenna. 1 2 Tune to a radio station 1 2 Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. Repeat step 2 to tune to more stations. $ To tune to a weak station, press / #+ # + # reception.
8 Adjust sound Adjust volume level During play, press VOL +/- to increase/decrease the volume level. Select a sound effect Note $ You cannot use different sound effects at the same time. Select a preset sound effect During play, press DSC repeatedly to select: $ [CLASSIC] (classic) $ [JAZZ] (jazz) $ [POP] (pop) $ [ROCK] (rock) Enhance bass The best DBB (Dynamic Bass Enhancement) setting is generated automatically for each DSC option.
1 2 3 4 Press SYSTEM/MENU. $ Select a setup page. Select an option and then press $ $ . Select a setting and then press OK. $ To return to the previous menu, press RETURN/TITLE. $ To exit the menu, press SYSTEM/ MENU. General setup [Off] – Turn off the digital output. [PCM] – If the connected device cannot decode multichannel audio, select this option. [All] – If the connected device supports multi-channel audio formats, select this option.
$ $ $ [4:3 Pan Scan] – For 4:3 screen TV: fullheight display with the trimmed sides. [4:3 Letter Box] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen. [Wide Screen] – For wide-screen TV: display ratio 16:9. [Picture Settings] # # settings. $ [Standard] – Original color setting. $ [Vivid] – Vibrant color setting. $ [Cool] - Soft color setting. $ [Personal] – Customizes the color setting.
10 Other features Activate demonstration mode You can see an overview of all features. 1 Note $ If you forget the password, enter ‘123456’ before you set a new password. In the standby mode with clock display (if set), press on the main unit to activate the demonstration mode. » A demonstration of major available features starts. To deactivate the demonstration mode: [Version Info] Display the software version of this apparatus.
MP3-LINK socket or AUX-IN (L and R) sockets. Activate/deactivate alarm timer In standby mode, press TIMER/SLEEP repeatedly. » If timer is activated, is displayed. » If timer is deactivated, display. 3 Start to play the device (see the device user manual). disappears on the Listen through headphone Tip Plug a headphone into the socket. $ Alarm timer is not available when the source is set as “MP3 LINK” or “AUX-IN”.
Note $ Product information is subject to change without prior notice. \& Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Sensitivity - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 64 - 108 MHz 50 KHz <22 dBf English 11 Product information <43 dBf >28 dBf <2% >55 dB % Speakers $ ! % Rated Output Power Frequency Response Signal to Noise Ratio Aux Input 2 X 60 W RMS S/N Ratio 4 ohm 3.
Supported disc formats $ $ $ $ $ $ $ $ $ Digital Video Discs (DVDs) Video CDs (VCDs) Super Video CDs (SVCDs) Digital Video Discs + Rewritable (DVD+RW) Compact Discs (CDs) ? & ? # [Q DivX(R) disc on CD-R(W): DivX 3.11, 4.x and 5.x WMA Supported MP3-CD formats: $ ISO 9660 $ Max. title/album name: 12 characters $ Max. title number plus album: 300. $ Min. nested directory: 6 levels. $ Max. album number: 32. $ Max. MP3 track number: 2000.
Caution $ Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. Philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available. No power Ensure that the AC cord of the apparatus is connected properly.
Disc does not play Insert a readable disc with the label side facing you. Check the disc type, color system and regional code. Check for any scratches or smudges on the disc. Press SYSTEM MENU to exit the system setup menu. Disable the password for parental control or change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system again.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCD3020_51_UM_V2.
