Register your product and get support at www.philips.com/welcome DCD2030 EN User manual =+ +.
1 2 3 4 5 6 7 Important 4 Know these safety symbols Important Safety Instructions Hearing safety Notice 4 4 4 5 Congratulations 7 Feature introduction What’s in the box Overview of the main unit 7 7 8 Before use 11 Place the unit Connect Install/replace the battery of remote control 11 12 13 Get started 14 Turn on Store radio stations automatically Find the correct video input channel Select the correct TV system Select a language for on-screen display 14 14 14 15 15 Play disc/USB 15
1 Important Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Know these safety symbols Warning This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
Listen for reasonable periods of time: Prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment reasonably and take appropriate breaks. Be sure to observe the following guidelines when using your headphones. Listen at reasonable volumes for reasonable periods of time. Be careful not to adjust the volume as your hearing adapts. Do not turn up the volume so high that you can’t hear what’s around you.
Trademark notice Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation. ABOUT DIVX VIDEO: DivX® is a digital video ! \ ]^ : = \ ]^ _ ] \ ]^ ] Visit www.divx.com for more information and ] \ ]^ video.
Congratulations on your purchase, and ! | = ! support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this product. The model number and serial number are on the back of the main unit. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit a o b n c d e f m g h l i j a Dock for iPod/iPhone/iPad b Disc compartment Hold the disc. c USB socket. d MP3 LINK Connect external audio device. e Headphone socket. Turn on the apparatus, switch to standby mode, or Eco Power standby mode. k i j h SOURCE Select a source. 8 EN Start or pause play. Stop play. Erase a program. k l PRESET Skip to the previous/next track, title, Select a programmed radio station.
g f a e d b c a SPEAKER OUT Connect the speakers. e VIDEO OUT Video output jack. b AUX-IN Connect an external audio device. f AUDIO OUT L/R Audio output jack. c AC MAIN~ Connected with AC power cord. g COAXIAL Coaxial jack. d FM AERIAL Improve FM reception.
Overview of remote control e a b c r d e AUDIO / SUBTITLE For menus: navigate up/down. Invert a picture. AUDIO: Toggle between stereo and mono. SUBTITLE: Select a subtitle language for a video. f OK _ g f g h q i p j / Search in a track or disc. Fast backward or forward. For menus, navigate left/right. Rotate a picture. Return to a previous display menu. Start, pause or resume play.
r MODE/OPTIONS Select repeat play or random play. Accesses options relating to the current activity or selection. 3 Before use E n g lis h q DSC/DBB Select a preset sound setting. Turn on or off dynamic bass enhancement. Place the unit Note Risk of overheating! Never install this apparatus in a 1 2 ) ] around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus.
Connect Option 2: Connect through component video cables Connect speakers 1 Insert the speaker wires completely into the speaker input sockets on the back of the unit. Pr/Cr Pb/Cb Note For optimal sound, use the supplied speakers only. Connect only speakers with impedance that is the Y Connect a progressive scan TV through component video cables for higher quality video. Connect power same or higher than the supplied speakers.
Connect an audio cable to: the AUX IN L/R sockets on this product. the audio output sockets on the external device (for example, audio player). Install/replace the battery of remote control E n g lis h Play from external outer device Caution Risk of explosion! Keep batteries away from heat, + ] Do not mix batteries (old and new or carbon and alkaline, etc).
4 Get started 4 ! Note Turn on 1 Press PROG/CLOCK SET setup. The number key on the remote control is deactivated Press . » The unit switches to the last selected source. Note If no source is played within 15 minutes, the unit in this mode. Store radio stations automatically switches to standby mode. If no operation is performed within 15 minutes in standby mode, the unit switches to Eco-power standby mode. Press to switch the unit to the last source when it was turned off.
This unit is compatible with both NTSC and PAL. If the picture is abnormally displayed with the default setting, select a TV system that ! = J* ~ ~ [TV System] details) 5 Play disc/USB E n g lis h Select the correct TV system Caution Risk of damage to the unit! During play, never move the unit. Never put any object other than a disc into the disc compartment.
Select a subtitle language 1 You can select a subtitle language for a DVD or DivX (Ultra) video. Press USB to select the source for USB storage device. 2 Insert the USB storage device. » The unit starts playing automatically. 1 During play, press SUBTITLE repeatedly. » The user interface is displayed. Note MP3 For some DVDs, the language can only be changed WMA from the disc menu. Press DISC MENU to access the menu.
1 During video play, press OPTIONS to access PBC menu. 2 Use / to highlight the slow forward/ backward option. 3 Press , and use ratio. 4 Press OK Display play information 1 During play, press INFO/RDS to display play information on the TV. Search forward/backward 1 During video/audio play, press / repeatedly to select a search speed. To resume play at normal speed, press . During video playback, press OPTIONS to access PBC menu.
3 4 Picture view options Image playback control 1 Press OPTIONS to access image options. Color Zoom Photo Preview Press OK to start the slideshow. The slideshow stops after all photos are displayed for one time. To stop the slideshow, press . Note This function is only available when you select the folder as the play source. This unit can only display digital camera pictures with JPEG-EXIF format, which is widely used in digital cameras.
Function To increase/decrease the volume. To mute/restore sound. DBB/DSC To select your desired sound effect: [POP] (pop) [JAZZ] (jazz) [ROCK] (rock) [CLASSIC] (classic) [DBB] (DBB) [FLAT] J 6 Play iPod/ iPhone/iPad E n g lis h Key VOL +/- This system is equipped with a dock for iPod/ iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers.
Load the iPod/iPhone/iPad 1 Push the lock key to open the lid of the dock. 2 Load the iPod/iPhone/iPad onto the dock. 20 EN Install the rubber pad Note For iPad 2, you need to use the supplied rubber pad to keep it stable. 1 Open the dock, and place the rubber pad onto the dock compartment as indicated. 2 Load your iPad 2.
7 Listen to FM radio 1 2 3 Tune to FM radio stations Load your iPod/iPhone/iPad. Press the button DOCK on your RC. Play the selected track on your iPod/ iPhone/iPad. To pause/resume the play, press . To skip to the previous/next audio track, press / . To select a track: press / to highlight a track, and then press OK ! Charge the iPod/iPhone/iPad Note Ensure that you have connected and fully extended the supplied FM antenna. 1 2 Press FM.
Program radio stations manually 8 Setup 1 Note After you press the button . » The home menu appears. You can program a maximum of 20 preset radio stations. 1 2 3 4 Tune to a radio station. Press PROG/CLOCK SET to activate programming mode. Press / to select a number from 1–20 for this radio station, then press PROG/ CLOCK SET to program the current radio station. » The preset number and the frequency of the preset station are displayed. USB Disc 2 Select to access the system menu.
[Sleep Timer]:Sets a sleep timer to switch the home theater to standby ! [DivX(R) VOD Code]: Get registration code of DivX Video On Demand Registration. [Progressive]:Enables or disables progressive scan mode. [Picture Settings]< color setting or set the color manually. Preference setup Note If you select a language which is not available on a disc, this unit uses the default language of the disc. Audio Setup 1 2 3 Press button.
9 Other features 6 » To deactivate alarm timer, press SLEEP/TIMER again. Set alarm timer This unit can be used as an alarm clock. You can select DISC, iPod/iPhone/iPad, playlist, TUNER or USB as alarm source. Press / to adjust volume, then press SLEEP/TIMER ! » is displayed. Note Alarm timer is not available in MP3 LINK mode. If DISC/USB source is selected and the track cannot be played, tuner is activated automatically. Note Make sure that you have set the time correctly.
Disc Region Code Laser Type Disc Diameter Video Decoding Video DAC Signal System Video Format Video S/N Audio DAC Total Harmonic Distortion Frequency Response You can play DVD discs marked with the following region code. S/N Ratio Note Product information is subject to change without prior notice. DVD region code 4 Hz - 20 kHz (44.
General information AC power Operation Power Consumption Eco Standby Power Consumption Headphone output USB Direct Composite Video Output Coaxial Output Dimensions - Main Unit (W x H x D) - Speaker Box (W x H x D) Weight - Main Unit - Speaker Box 110-240V~50/60Hz 28 W 0.5 W 2 X 15 mW, 6 ohm Version 2.0 1.0 Vp-p, 75 ohm 0.5 Vpp±0.1Vpp, 75 ohm 200 X 118 X 210 mm 140 X 224 X 144 mm 1.3 kg 1.
Caution Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the philips web site (www. philips.com/support). When you contact philips, ensure that your apparatus is nearby and the model number and serial number are available. No power Ensure that the AC cord of the apparatus is connected properly.
\ ]^ ] complete. Due to Digital Rights issue, the DRM ] through an analog video connection (e.g. composite, component and scart). Transfer the video content onto the Disc Media Poor radio reception Increase the distance between the apparatus and your TV or VCR. Fully extend the FM antenna. Connect an outdoor FM antenna instead.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCD2030_98_UM_V2.
