Register your product and get support at www.philips.
1 2 3 4 5 6 7 Important 4 Safety Notice 4 6 Your Docking Entertainment System 7 Introduction What’s in the box Overview of the main unit Overview of the remote control 7 7 8 9 Get started 11 Connect power Prepare the remote control Set clock Turn on 11 12 12 12 Play 13 Play disc Play from USB Skip to a track Pause/resume play Search within a track Display play information Select repeat/shuffle play options Program tracks 13 13 13 13 13 14 14 14 Adjust sound 15 Adjust volume Select a
1 Important Safety g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer.
o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). q Where the plug of the Direct Plugin Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical equipment.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit e a f b g c h d i j k l m n o p q r a MP3-LINK • Jack for an external audio device. g EJECT • Eject the disc. b h Display panel • Show current status. • Jack for a USB mass storage device. c IR sensor • Detect signals from the remote control. Always point the remote control at the IR sensor. i SOURCE • Select a source: DISC, USB, DOCK, DIGITAL RADIO, FM TUNER, or MP3-Link. d Disc compartment j PROG • Program tracks. • Program radio stations.
m MODE/SCAN • Select repeat/shuffle mode. • Search FM/DAB radio stations. Overview of the remote control n STOP/MENU • Stop play. • Access iPod/iPhone or DAB menu. a o ALBUM·PRESET +/• Select a preset radio station. • Skip to the previous/next album. • Adjust time. c d p / • • • Skip to the previous/next track. Search within a track/disc. Tune to a radio station. OPEN/CLOSE b CD TUNER PRESET/ALBUM e • • Start or pause play. Confirm a selection.
d / • • • Navigate in the iPod/DAB menu. Skip to the previous/next album. Skip to the previous/next preset station. Select 12 hour or 24 hour format. Adjust hour/minute digits. • • e / • • • Skip to the previous/next track. Search within a track. Tune to a radio station. • • /ENTER Start or pause play. Confirm a selection. f g USB/MP3 LINK • Select USB device source. • Select external audio device source. h RDS/DISPLAY • Display CLOCK. • Display RDS/DAB information.
1 Select the right adaptor. 2 Connect the power adaptor to the wall outlet. English 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus.
Prepare the remote control Set clock Caution Note • Risk of explosion! Keep batteries away from heat, • You can set the clock in the standby mode only. sunshine, or fire. Never discard batteries in fire. To insert the remote control battery: 1 2 Open the battery compartment. 3 Close the battery compartment. 1 In standby mode, press and hold PROG/ CLOCK SET to activate the clock setting mode. » SET CLOCK is displayed. » The 12 hour or 24 hour format is displayed.
English 4 Play Play disc 1 2 Press CD to select the disc source. Insert a disc into the disc compartment with the printed side facing up. » Play starts automatically. • • • Press Press Press to access a folder. / to select a file. to start play. Skip to a track For CD: 1 Play from USB Note • Ensure that the USB storage device contains playable Press / to select another track. • To select a track directly, you can also press a key on the numerical keypad. For MP3 disc and USB: 1 2 audio content.
Display play information Program tracks 1 You can program a maximum of 20 tracks. During play, press DISPLAY repeatedly to select different play information. 1 In CD/USB mode, at the stop position, press PROG to activate the program mode. » [PROG] (program) and track number begin to blink. 2 For MP3 tracks, press album. During play, press MODE repeatedly to select a repeat option. » [Rep one]: plays the current track continuously. 3 Press / to select a track number, then press PROG to confirm.
6 Play iPod/ iPhone/iPad English 5 Adjust sound Adjust volume 1 During play, press VOL +/- to increase/ decrease the volume. This system is equipped with a dock for iPod/iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] (jazz) • [CLASSIC] (classic) • [ROCK] (rock) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement.
Load the iPod/iPhone/iPad Charge the iPod/iPhone/iPad 1 2 When the system is connected to power, the docked iPod/iPhone/iPad begins to charge. Lift the lid of the dock. Load the iPod/iPhone/iPad onto the dock. Note • IPod with color display, iPod classic, and iPod with video are not compatible with dock charging. • In Eco power standby mode, iPod/iPhone/iPad cannot be charged. Remove the iPod/iPhone/iPad 1 2 Listen to the iPod/iPhone/iPad 1 2 3 16 Press the button iPod on your RC.
• • Listen to Digital Audio Broadcasts (DAB) Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information. For the first time when DAB mode is switched on. 1 • ?: Indicates that the station is not currently available, or not active. : Indicates that the station is a primary station with secondary service. : Indicates that the station is a secondary station.
Display DAB information On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station. Seven types of service information are available. 1 Press RDS/DISPLAY repeatedly to cycle through the display information (if available). » Dynamic label segment (DLS) » Program type (PTY) » Ensemble Name » Time » Channel and frequency Manual tune With this feature, you can tune to a specific channel/frequency manually.
Press to confirm the selection. » You should be able to hear the difference in compression immediately. Program radio stations automatically You can program a maximum of 30 preset radio stations (FM). 1 Note • The best way to determine which of these DRC 1 Select Prune stations and press . » All stations that have a question mark are deleted from the service list. System • [Factory reset]: Reset all the settings of this unit to factory default. Press to confirm reset.
FM stations with RDS Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations. If you listen to a FM station with RDS signal, “RDS” displays. Reset to factory setting 1 In DAB/FM mode, press MENU to enter the menu options. 2 Press / repeatedly until [System] displays on the display panel. 3 Press to access the system menu. » [Factory Reset] displays. 4 Press to enter factory reset menu.
6 Press SLEEP/TIMER to confirm. » The minute digits begin to blink. 7 Press / to set the minute. » The timer is set and activated. Set the sleep timer This system can switch to standby automatically after a set period of time. 1 When the system is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When sleep timer is activated, is displayed. » is displayed.
9 Product information Note • Product information is subject to change without prior notice. Tuner Tuning Range FM: 87.5 - 108 MHz; DAB: 174.92-239.
Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens.
RDS program types NO TYPE NEWS AFFAIRS INFO SCIENCE VARIED POP M ROCK M MOR M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN No RDS programme type News services Politics and current affairs Special information programs Sports Education and advanced training Radio plays and literature Culture, religion and society Science Entertainment programs Pop music Rock music Light music Light classical music Classical music Special music programs Weather Finance Children’s programs SOCIAL RELIGION PHONE IN TRAVE
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCB352_10_UM_V1.
