Register your product and get support at www.philips.
What’s in the box de art Gui anual User M Quick St Main unit 1 Remote control MP3 link cable Power adaptor Connect A Connect power MP3-LINK 1 Connect the AC power adaptor to: • the DC socket on the main unit • the power socket. DC 9V 1.9A DC 9V 1.
2 Setup A Set time and date B Set the alarm timer 1 In standby mode, press and hold SET TIME/ AUTO SCAN for 2 seconds. » [SYNC ON] is displayed and [ON] begins to blink. 2 Press PRESET + /PRESET - to select ON or OFF. » If you select [ON], the unit reads the DAB or iPhone/iPod time and sets the clock automatically. » If you select [OFF], the unit turns off the time synchronization. 3 Press SET TIME/AUTO SCAN to confirm. The time format [24H] or [12H] begins to blink. 4 Press PRESET + 24H or 12H.
2 Setup C Turn on/off the alarm timer 1 Press AL1/AL2 to turn on or off the alarm timer. » If the alarm timer is turned on, the alarm icon appears. » If the alarm timer is turned off, the alarm icon disappears. 3 Enjoy A Play from iPod/iPhone 1 Lift up the iPhone/iPod dock cover on the top panel. 2 Place the iPhone/iPod into the dock. D Repeat alarm 1 E 1 When the alarm rings, press REP AL/BRIGHTNESS. » The alarm repeats ringing minutes later. View the alarm settings Press AL1 or AL2.
3 3 Enjoy Press iPhone/iPod on the remote control to select iPod/iPhone source. » The connected iPod/iPhone plays automatically. • To pause/resume play, press OK/ . • To skip to a track, press TUNING - /TUNING + on the remote control. • To search during play, press and hold TUNING - /TUNING + , then release to resume normal play. • To go back to the previous iPod/ iPhone menu, press MENU. To scroll through the menu, press PRESET + /PRESET - . To confirm a selection, press OK/ .
R w © 2010 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. DCB242_05_QSG_V1.
