Always there to help you Register your product and get support at www.philips.
Contents 1 Safety Safety Hearing safety 2 Your micro music system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Before use Connect the radio antenna Connect power Install the remote control battery 4 Get started Turn on Set the clock Select a source Adjust the brightness of LCD display 5 Play from hard media Play a disc Play from a USB storage device Control play Program tracks 6 Use the dock Compatible iPod/iPhone/iPad models Enjoy audio through the doc
1 Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Safety Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat.
2 Your micro music system Overview of the main unit ab c d e f g h i Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: j kl m Model No. __________________________ Serial No.
f Disc compartment g h • • • • Press to eject the disc from the disc compartment. / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. i VOL+/VOL• Increase or decrease the volume level. j Dock for iPod/iPhone/iPad • Connect to a compatible iPod/iPhone/ iPad. k IR sensor • Receive infrared signals from the remote control. l Indicator • It lights red when the product is in the eco power standby mode.
• Switch the source to the connected iPod/iPhone/iPad or the disc in the disc compartment. d FM/DAB • Switch the source to FM tuner or DAB tuner. e PRESET/ALBUM / • Skip to the previous or next album. • Select a preset radio station. • Navigate through iPod/iPhone playlist. f • • • • / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. Select a menu option. g + VOL • Increase or decrease the volume level. h • • Start, pause, or resume play.
3 Before use 1 Select an adaptor plug converter and fix it to the adaptor. 2 Connect the AC power adaptor to • the DC IN socket on the back panel, and • the wall outlet. Connect the radio antenna Note •• For optimal reception, fully extend the antenna and adjust its position, or connect an outdoor antenna. •• This product does not support AM (amplitude modulation) radio reception. DC IN Connect the radio antenna to the product.
Install the remote control battery a c b 1 2 Open the battery compartment. 3 Close the battery compartment. Insert one AAA battery with correct polarity (+/-) as indicated.
4 Get started • • Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. between the working mode and the normal standby mode, or from the eco power standby mode to the working mode. Set the clock Note Always follow the instructions in this chapter in sequence. •• During setting, if no action is made within 90 seconds, the product exits clock setting without saving earlier operations.
Select a source On the product, press SOURCE repeatedly to select a source. • : the playlist on the connected iPhone/iPod/iPad • : the audio input through the AUDIO IN socket • : the disc in the disc compartment • : .mp3 files stored on the connected USB storage device • : the DAB tuner • : the FM tuner 5 Play from hard media Play a disc Note •• Make sure that the disc contains playable audio content. You can also press source buttons on the remote control to select a source.
power peak current no more than 500 mA.) Buttons Note Functions / •• WOOX Innovations does not guarantee compatibility / with all USB storage devices. •• FAT16 and FAT 32 file systems are supported, and NTFS (New Technology File System) not. / REPEAT/SHUFFLE Pause or resume play. Stop play. Skip to the previous or next track. Press and hold to rewind a track or search forward fast. Skip to the previous or next album when one or more albums exist. Select an available play mode.
6 Use the dock You can enjoy audio from iPod/iPhone/iPad through this product. Note •• There is no audio output from the headphone socket of the connected iPod/iPhone/iPad. Compatible iPod/iPhone/iPad models This product supports the following iPod, iPhone, and iPad models.
4 Connect your iPod/iPhone/iPad to the dock. »» Once the iPod/iPhone/iPad is recognized, the charging starts. 5 Play a track on your iPod/iPhone/iPad. Buttons MENU/ / / Functions Start, pause, or resume play. Access the playlist of iPod/iPhone. Navigate through the playlist of iPod/iPhone. Skip to the previous/next track. Press and hold to rewind a track or search forward fast. Charge your iPod/iPhone/iPad Once the iPod/iPhone/iPad is docked and recognized, the charging starts.
7 Listen to FM radio Program radio stations automatically Note •• You can program a maximum of 20 preset radio stations. Tune to an FM radio station Note •• Make sure that you have connected and fully extended the FM antenna. Press and hold SCAN/CLOCK until the frequency starts to change. »» All available stations are programmed in the order of waveband reception strength. »» The first programed radio station is broadcast automatically.
Display RDS information RDS (Radio Data System) is a service that allows FM stations to transfer additional information. If you tune to an RDS station, an RDS icon is displayed. 1 2 8 Listen to DAB radio stations Tune to an RDS station. Press RDS repeatedly to scroll through the following information (if available): »» Program service »» Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)...
Tip •• You can re-scan to update the list of stored stations (see "Use DAB menus" > "Re-scan for stations"). •• You can tune to a station manually (see "Use DAB menus" > "Tune to a station manually"). Tune to a stored station 1 Switch the source to . »» The last listened station is broadcast. 2 Press / to select a station, and then press OK to start listening. Note •• If ? is displayed before the name of current station, the station is unavailable or inactive.
1 2 Press OK to access the station list. 3 Press OK to confirm the option. Press / 5A to 13F. to select a station from Remove invalid stations This option lists active stations and removes any stations that are in the list but have no service in your area. In front of the station name of an invalid station, a question mark (?) is displayed. 1 2 3 9 Adjust sound The following operations are applicable to all supported media.
10 Other features Use the alarm timer This product can be used as an alarm clock. You can select the disc, iPod/iPhone/iPad library, FM radio station, DAB radio station, or .mp3 files stored on a USB storage device as alarm source. Deactivate/Re-activate the alarm timer In standby mode, press SLEEP/TIMER. »» If TIMER disappears, the alarm timer is deactivated. »» If TIMER is displayed, the alarm timer is activated. Stop an alarm When an alarm rings, press to stop it.
Listen through headphone Plug a headphone into the front panel of main unit. socket on the Note •• No audio output from the headphone socket when you listen to the docked iPod/iPhone/iPad. Listen through the speakers instead. Listen to an external device Charge your USB device You can also listen to an external audio device, for example, MP3 player, through this product. You can charge your USB device, for example, smart phone, with this product.
11 Use system menus Use the system menus to • check the version of current software of this product, • upgrade the software, and • reset the product to factory default status. Check the current software version Press OK to display the version of current software. Upgrade the software 1 2 Go to www.philips.com/support. 3 4 Click the link of "Installation instructions". 5 Follow the instructions to complete the upgrade.
12 Product information AUDIO INPUT 650 mV RMS 20 kOhm Disc Note •• Product information is subject to change without prior notice. Audio DAC Total harmonic distortion Frequency response Specifications S/N Ratio General information AC power adaptor Model: AS360-120AD300 (Philips) Input: 100 - 240 V ~, 50/60 Hz, 1.2 A Output: 12 V Operation power consumption Eco standby power consumption USB Direct Max. loading of USB output Dimensions: Main unit (W x H x D) Weight ≤ 0.5 W Version 1.1, 2.
USB playability information Maintenance Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.1) • Memory cards (requires an additional card reader to work with this unit) Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
13 Troubleshooting Warning •• Never remove the casing of this product. No disc is detected. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available. Problem Solution No power.
14 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
EN 25
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. DCB2272_05_UM_V1.
