Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Micro System 4 Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Placement Prepare FM/DAB+ antenna Prepare the remote control Connect power Set clock Turn on 4 Play Play from iPod/iPhone/iPad Play disc Play from a USB storage device Control play (CD/USB mode) Program tracks Adjust sound Display different information 4 4 5 6 8 8 8 8 8 8 9 7 Other features 15 8 Product information 17 9 Troubleshooting 18 10 Not
1 Important Warning •• Never remove the casing of this micro system. •• Never lubricate any part of this system. •• Never place this system on other electrical equipment. •• Never look into the laser beam inside this system. •• Keep this system away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the system from the power.
2 Your Micro System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit a b MP3-LINK c SOURCE OK / MENU / VOLUME VOLUME d e f g h i j k p o n l FM ANT DC IN 12 V 3A m D O C K for a b c • Connect a USB storage device. • Headphone socket. • • Turn the system on. Switch to standby mode. d SOURCE • Select a source: CD, USB, DAB+, FM, MP3 Link, or Dock. 5 EN e • • • • / Skip to the previous or next track. Search within a track or disc. Tune to radio stations. Adjust time. f OK/ • Start or pause play. • Confirm a selection.
h • Open or close the disk tray. i VOLUME + / • Adjust volume. j MENU/ • For iPhone 5, go back to the previous menu. • Access FM/DAB+ menu. • Stop play or erase a program. Overview of the remote control a b DAB k Display panel • Show play information. c l Disc tray d m DOCK for iPod/iPhone/iPad n DC IN • Connect power. o FM ANT • Improve FM/DAB+ radio reception. p FOR SOFTWARE UPDATE ONLY • Update software via USB connector (if available).
e • • • • / Skip to the previous or next track. Search within a track or disc. Tune to radio stations. Adjust time. f VOL +/• Adjust volume. g MUTE • Mute or resume sound. h REPEAT/SHUFFLE • Play a track or all tracks repeatedly. • Play tracks in current album repeatedly. • Play tracks randomly. i DBB/DSC • Select a preset sound setting. • Turn dynamic bass enhancement on or off. j CLOCK/SCAN • Set time. • Scan/storeradio stations automatically. k SLEEP/TIMER • Set sleep or alarm timer.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Connect power Always follow the instructions in this chapter in sequence. Caution •• Risk of product damage! Make sure that the power Placement You can place the system on a flat surface or mount it on a wall. supply voltage corresponds to the voltage printed on the back of the system.
2 3 4 5 6 Press and hold CLOCK on the remote control for two seconds. »» [SET CLOCK] (set clock) scrolls on the display, and then 12 or 24 hour format blinks. 4 Play Press / repeatedly to select the hour format. Play from iPod/iPhone/iPad Press CLOCK to confirm. Repeat steps 3-4 to set the hour and minute respectively. Repeat steps 3-4 to select whether to synchronize time with DAB+ stations. • [DAB TIME SYNC [Y]]: Synchronize time from the DAB+ stations automatically.
Listen to the iPod/iPhone/iPad 3 4 Note •• Make sure that the iPod/iPhone/iPad is loaded correctly. 1 2 Press SOURCE repeatedly or DOCK on the remote control to select iPod/iPhone/ iPad source. Play tracks on the iPod/iPhone/iPad. • To pause or resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. • To go back to the previous iPhone 5 menu, press MENU. • To scroll through the menu, press / .
Control play (CD/USB mode) / / OK REPEAT/ SHUFFLE Select an audio file; Press and hold to fast forward or fast reverse the track during playback, then release to resume play. For MP3/WMA tracks, select an album or folder. Start or pause play. Stop play. Confirm a selection. [ ]: Play the current track repeatedly. [ ]: (for MP3/WMA only): Play all tracks in this album repeatedly. [ ]: Play all tracks repeatedly. [ ]: Play all tracks randomly.
5 Listen to DAB+ radio Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For first-time use 1 2 Press DOCK/DAB repeatedly to select DAB+ radio. »» [FULL SCAN] (full scan) is displayed. Press OK to start full scan. »» The system stores all DAB+ radio stations automatically, and then broadcasts the first available station. »» The station list is memorized in the system.
available DAB+ stations, or scan DAB+ stations if no station is stored in the list. [FULL SCAN] (full scan): Scan and store all available DAB+ radio stations. [MANUAL TUNE] (manual tune): Tune to a specific channel/frequency manually. [PRUNE] (prune): Remove invalid stations from the station list. [SYSTEM] (system): Adjust system settings (see ‘Other features - Use system menu'). • • • • 3 4 Press OK to select an option. Repeat steps 2-3 if sub-option is available under one option.
Program FM radio stations manually 1 2 3 4 5 In tuner mode, tune to an FM radio station. Press PROG to activate programming mode. »» [PROG] (program) blinks. Press or repeatedly to select a channel number. Press PROG again to confirm. Repeat steps 1-4 to store other FM stations. Note •• To remove a pre-stored station, store another station Select stereo/mono broadcast Note •• Stereo broadcast is the default setting for tuner mode.
7 Other features 3 4 Use system menu 5 1 6 2 In FM/DAB+ mode, when the [System] (system) menu is displayed, press / repeatedly to select an option. Press OK to confirm the selection. [Factory Reset] [Yes] [No] [SW version] [Software Upgrade] [Yes] [No] Reset the system to factory default status. Cancel. Display software version. Select to update software. Cancel. Note 1 2 3 4 1 the mini-USB port. 2 Register your product 15 Go to www.philips.com/support.
5 6 Press TIMER to confirm. »» The minute digits blink. Repeat steps 4-5 to set the minute and alarm volume. Tip •• If the system is idle for 90 seconds, it exits alarm setting Play from an external audio device With this system, you can play audio from an external audio device like MP3 player. 1 mode automatically.
8 Product information Total Harmonic Distortion <3% Signal to Noise Ratio >50 dBA DAB: Tuning Range Note •• Product information is subject to change without prior notice.
Unsupported formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display. • Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .
•• •• Replace the battery. Aim the remote control directly at the sensor on the front of the unit. 10 Notice No disc detected •• Insert a disc. •• Check if the disc is inserted upside down. •• Wait until the moisture condensation at the lens has cleared. •• Replace or clean the disc. •• Use a finalized CD or correct format disc. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DCB2077_10_UM_V2.
