Firmware-Upgrade Software

Introduction:
Philips strives to continually bring you the best experience from our products. To enjoy optimal
performance, you are highly recommended to upgrade the firmware of your device.
Preparation for firmware upgrade:
 A computer with an archive utility that supports the ZIP-format.
 An empty USB flash drive device.
Upgrade Procedure:
Step 1: Check your current firmware version
1. Turn on the device.
2. Press SOURCE button to select MP3 Link as the source.
3. Press button once.
4. Press and hold button for 2 seconds.
5. The firmware version will be displayed.
6. Compare the firmware version displayed to the latest version. If the existing firmware in
your radio is of an earlier version than the new release, please proceed to Step 2.
Otherwise, the latest firmware is installed and hence an upgrade is not needed.
Step 2: Upgrade the firmware for your radio
1. Click on the Download icon to download the new firmware package to your computer.
Note: DO NOT change the file name in the folder to avoid an update corruption.
2. Extract the zip file.
3. Copy and paste the folder called “system” to the root directory of the USB device.
4. Connect the USB device to the system.
5. Press SOURCE button to select USB as the source.
6. Firmware update starts automatically. The process would take a few minutes.
7. When the update is completed, the message “succeed” would be displayed.
Step 3: Confirm upgrade successfulness
1. Go over Step 1 Check your current firmware version to verify whether the new firmware
is correctly upgraded.
2. If the latest firmware has not been installed, repeat ‘Step 2 Upgrade the firmware for your
radio’ and ‘Step 3 Confirm upgrade successfulness’.
1. Check the current firmware
version
2. Upgrade the firmware for your
radio
3. Confirm upgrade
successfulness