User manual

12 EN
5 Play
Play a disc
Caution
•
Risk of damage to the product! During play, never move
the product.
• Never put any object other than a disc into the disc
compartment.
• Never look at the laser beam inside the player.
• Never play discs with accessories such as disc stabilizer
rings or disc treatment sheets.
1 Press CD to select the disc source.
2 Load a disc.
1) Press
to eject the disc tray.
2) Place a disc onto the disc tray with its
label facing up.
3) Press
to close the disc compartment.
3 Press if the play does not start
automatically.
Play from a USB storage
device
This product can play les that are copied onto
a supported USB storage device:
• ash drive
• memory card reader
• HDD (This product can only detect a
portable hard disc drive with the peak
current no higher than 500 mA through
the USB socket.)
Note
•
Philips does not guarantee compatibility with all USB
devices.
• NTFS (New Technology File System) data format is not
supported.
1 Connect the USB storage device into the
(USB) socket.
2 Press USB to select the USB source.
» Play starts automatically.
If the play does not start automatically,
1 Press PRESET/ALBUM / to select a
folder.
2 Press / to select a le.
3 Press to start the play.
Basic control
Buttons Actions
Start, pause, or resume play.
Stop play.
/ Skip to the previous or next
le.
/ Press and hold to rewind or
search forward.
MODE/SCAN Select a play mode: normal
play, repeat, or shufe.
RDS/DISPLAY Display the current status and
media information.
Program audio tracks
1
Press to stop the play.
2 Press PROG/CLOCK SET.
» [PRG] blinks on the display panel.
3 Press / to select a track number.
4 Press PROG/CLOCK SET.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press to play the programmed tracks.
• To erase the program, press
twice.