Operation Manual

9 EN
1 Open the battery compartment.
2 Insert 2 x AA size batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
• Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Set time and date
1 In standby mode, press and hold SET TIME
for 3 seconds.
» [24H/12H]beginstoblink,andyou
can hear a beep.
2 Press TUNING + or TUNING - to select
the12/24hourformat.
3 Press OKtoconrm.
» 0:00 will display, and the hour digits
begin to blink.
4 Press TUNING +/ TUNING - to set the
hour.
5 Press OKtoconrm.
» The minute digits begin to blink.
6 Repeatsteps4-5tosettheminute,day,
month and year.
Tip
• In12hourformat,[MONTH--DAY]isdisplayed.
• in24hourformat,[DAY--MONTH]isdisplayed.
Note
• When iPod/iPhone/iPad is connected, the clock
radio synchronizes time from the iPod/iPhone/iPad
automatically.
Turn on
1 Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1 Press POWER again to switch the unit to
standby mode.
» The time and date (if set) appear on
the display panel.
Select source
1 Press SOURCE repeatedly to select from
DOCK, FM and AUDIO IN.