Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 3 8 Product information Specifications 16 16 9 Troubleshooting 17 2 Your Docking Entertainment System 4 Introduction What's in the box Overview of the main unit Overview of the remote control 4 4 5 6 3 Get started 8 8 9 9 10 10 4 Play 11 11 12 5 Listen to radio 13 13 13 13 6 Other features 14 14 15 15 7 Adjust sound 15 15 15 15 15 Install batteries Connect power Prepare the remote control Set time and date Turn on Play from iPod/iPhone/iPad Play from
1 Important Caution •• Remove battery if it is exhausted or will not be used for a long time. •• Batteries contain chemical substances, so they should be disposed of properly. Safety •• Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. • Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from iPod, iPhone, iPad, radio, or other audio devices. The radio, iPod, iPhone, or iPad can be set as the alarm timer. You can set two alarm timers to go off at different time.
Overview of the main unit fg h a b c DOCKING SYSTEM FOR VOL DBB/DSC / SET TIME SLEEP i j TUNING PRESET PROG / SCAN PRESET k SOURCE d TUNING VOL e ALARM 1 l ALARM 2 m n o a PROG/SCAN • Program radio stations. • Automatically scan for radio stations. • In dock mode, search within a track. b SLEEP • Set the sleep timer. c DBB/DSC/SET TIME • In standby mode, set day, month and year.
i TUNING +/TUNING • Navigate between iPod/iPhone menus. • In standby mode, adjust minute and hour format. • When setting alarm, adjust alarm clock and volume, and select sound source. • Tune to an FM audio station. j OK • Start or pause iPod/iPhone/iPad play. • Confirm selection. • Select FM stereo or FM mono. k PRESET +/PRESET • Skip to next/previous track. • Select a preset radio program. • In dock mode, search within a track. l SOURCE • Select a source: dock, FM or audio-in.
d • • • / Skip to the previous/next audio file. Select a preset radio station. In dock mode, search within a track. e OK • Start or pause iPod/iPhone/iPad play. • Confirm selection. • Select FM stereo or FM mono. f TUNER • Select the tuner source. g DOCK • Select iPhone/iPod/iPad source. h MENU • Select the iPhone/iPod menu. i SET TIME/PROG • In standby mode, set the clock and date. • Program radio stations. j DBB • Turn on or off dynamic bass enhancement. k DSC • Select a preset sound setting.
3 Get started Caution •• Use of controls or adjustments or performance of Install batteries Note •• You can only use AC power as power supply. Batteries (not supplied) are for backup purpose. procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.
Connect power Prepare the remote control Caution Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. •• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC power cord, ensure you have completed all other connections. •• To disconnect the set from the mains completely, remove the mains plug from the wall socket.
Set time and date 1 2 3 4 5 6 In standby mode, press and hold SET TIME for 3 seconds. »» [24H /12H] begins to blink, and you can hear a beep. Press TUNING + or TUNING - to select the 12/24 hour format. Press OK to confirm. »» 0:00 will display, and the hour digits begin to blink. Press TUNING +/ TUNING - to set the hour. Press OK to confirm. »» The minute digits begin to blink. Repeat steps 4-5 to set the minute, day, month and year. Tip •• In 12 hour format, [MONTH--DAY] is displayed.
4 Play Play from iPod/iPhone/iPad Listen to the iPod/iPhone/iPad 1 2 3 Press SOURCE repeatedly to select dock mode. Press DOCK key to select dock source. Place the iPhone/iPod/iPad into the dock. You can enjoy audio from iPod/iPhone/iPad through this unit.
Play from an external device You can also listen to an external audio device through this unit. 1 2 3 12 Press AUDIO IN to select the AUDIO IN source. Connect the 3.5mm audio link cable (not supplied) to: • the AUDIO IN jack (3.5mm) on the back of the unit. • the headphone jack on an external device. »» the screen displays scrolling text message [AUDIO IN]; and shows date and time. Start to play the device (see the device user manual).
5 Listen to radio Note •• Only FM radio reception is available on this unit. Tune to a radio station Tip •• Position the antenna as far as possible from TV, VCR or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. •• [STEREO] is default setting for tuner mode. •• Under tuner mode, you can press OK repeatedly to toggle between [STEREO] and [MONO], and the unit memorizes your setting even if you turn off the unit or turn to other sources.
6 Other features Activate and deactivate the alarm timer 1 Set the alarm timer »» If the timer is deactivated, [ [ AL2] disappears. You can set two alarms at different time. 1 2 3 4 5 6 7 8 Ensure that you have set the clock correctly. Press and hold AL 1 or AL 2. »» The hour digits begin to blink, and you can hear one beep. »» [AL SET] flashes on the screen. 1 Repeat steps 4-5 to select an alarm sound source: dock, FM or buzzer. Repeat steps 4-5 to set the alarm volume.
Set the sleep timer 7 Adjust sound This unit can switch to standby automatically after a set period of time. 1 Press SLEEP repeatedly to select from 120, 90, 60, 45, 30 and 15 minutes. »» When the sleep timer is activated, the display shows . To deactivate sleep timer 1 Press SLEEP repeatedly until [OFF] (off) is displayed. »» The sleep timer is deactivated, disappears on the display. Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level step by step.
8 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input (MP3 link) 2 x 5 W RMS 80 Hz -16 kHz, ±3dB ≥67dBA 0.6 V RMS 20kohm FM Tuning Range Tuning grid - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Sensitivity Total Harmonic Distortion Signal to Noise Ratio FM 87.
9 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DC295_05_UM_EN_V2.
