Register your product and get support at DC190 EN User manual
English 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste.
2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from the iPod, other audio devices, or the radio. The radio, iPod, or buzzer can be set as the alarm timer. You can set two alarm timers to go off at different times.
Overview of the main unit
a ALARM 1/ALARM 2 • Set the alarm timer. • View the alarm time. • Turn off the alarm tone. b REPEAT ALARM/BRIGHTNESS CONTROL • Repeat the alarm. • Adjust the display brightness. c • Turn on the unit or switch to standby mode. d SOURCE • Select a source: iPod, FM tuner or MP3 link. e PRESET +/• Select a preset radio station. • Adjust time. f Display panel • Show current status. g Dock compartment h • i • • Start or pause iPod play. / Skip to the previous/next audio file.
l WAKE TO iPod/RADIO/BUZZ • Select alarm mode. m MP3-LINK • Jack for an external audio device. n DC IN • Power supply socket. o iPod dock • Load an iPod player. p VOL +/• Adjust volume. • Adjust time. q SLEEP • Set the sleep timer. 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
Connect power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC adaptor, ensure you have completed all other connections. Note •• The type plate is located on the bottom of the main unit. 1 Connect one end of the AC adaptor to the DC IN socket on the main unit.
2 Connect the other end of the AC adaptor to the wall outlet. Set clock 1 2 3 4 5 6 7 In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. »» The hour digits begin to blink. Press TUNING +/- to set the hour. Press TIME SET/AUTO SCAN. »» The minute digits begin to blink. Press TUNING +/- to set the minute. Press TIME SET/AUTO SCAN to confirm. »» The week day digits begin to blink. Press TUNING +/- to set the week day. Press TIME SET/AUTO SCAN to confirm. Turn on 1 Press .
Switch to standby 1 Press again to switch the unit to standby mode. »» The clock (if set) appears on the display panel. Adjust volume 1 4 During play, press VOL +/- to increase/decrease the volume. Play Play from iPod You can enjoy audio from iPod through this unit. Compatible iPod Apple iPod models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. Load the iPod 1 Push to open the dock compartment.
2 Place the iPod in the dock. Remove the iPod 1 Pull the iPod out of the dock. Listen to the iPod 1 2 Ensure that the iPod is loaded correctly. Press SOURCE repeatedly to select iPod source. »» The connected iPod plays automatically. . • To pause/resume play, press / . • To skip to a track, press / • To search during play, press and hold release to resume normal play. , then Charge the iPod When the unit is connected to power, the docked iPod begins to charge.
Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 3 Start to play the device (see the device user manual). 5 Listen to radio Note •• Only FM radio reception is available on this unit.
3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/- repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. »» All available stations are programmed in the order of waveband reception strength. »» The first programmed radio station is broadcast automatically.
Select a preset radio station 1 6 Press PRESET +/- to select a preset number. Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALARM 1 or ALARM 2 for 2 seconds. or and hour digits begin to blink. »» 3 4 5 6 7 Press TUNING +/- repeatedly to set the hour. Press ALARM 1 or ALARM 2 to confirm. or and minute digits begin to blink. »» Repeat steps 3-4 to set the minute.
Tip •• If iPod source is selected but no iPod is loaded, the buzzer is selected automatically. Activate and deactivate the alarm timer 1 Press ALARM 1 or ALARM 2 repeatedly to activate the timer. or is displayed. »» If the timer is activated, • To deactivate the alarm time, press ALARM 1 or is displayed. ALARM 2 repeatedly until or disappears. »» If the timer is deactivated, Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. »» The alarm repeats ringing minutes later.
View the alarm settings 1 Press ALARM 1orALARM 2. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 Press SLEEP repeatedly to select a set period of time (in minutes). »» When the sleep timer is activated, the display shows . Tip •• When the sleep timer is activated, the volume will gradually decrease. To deactivate sleep timer 1 Press SLEEP repeatedly until [OFF] (off ) is displayed. disappears on the »» When the sleep timer is deactivated, display.
Specifications Amplifier Rated Output Power 2X1.5 W RMS Signal to Noise Ratio >55 dB MP3 Link 0.6 V RMS 10 kohm Tuner FM Tuning Range 87.
General information AC power (power adaptor) Input: 100-240V~, 50/60Hz, 1.3A; 0.5A; Output: 6.5V Brand name: Philips; Model No.: AS100-065-AB130 Operation Power Consumption <5W Standby Power Consumption <2W Dimensions - Main Unit (W x H x D) 144 x 144 x 62 mm Weight - Main Unit 0.44 kg 8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself.
No sound •• Adjust the volume. No response from the unit •• Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception •• Increase the distance between the unit and your TV or VCR. •• Fully extend the FM antenna. Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Power has been interrupted or the power plug has been disconnected. •• Reset the clock/timer.
部件名称 Name of the Parts 有毒有害物质或元素 Hazardous/toxic Substance 铅 六价铬 多溴 多溴二 汞 (Hg, 镉 (Cd, (Pb, (Chromium 联苯 苯醚 Mercury) cadmium) Lead) 6+) (PBB) (PBDE) Housing 外壳 O O O O O O PWBs 电路板组件 X O O O O O Accessories (Remote control & cables) 附件 （遥控器， 电源线， 连接线） X O O O O O O: O: X: X: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363 - 2006 标准规定的限量要求以下。 Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 - 2
环保使用期限 Environmental Protection Use Period 此标识指期限（十年），电子信息产品含有的有毒有害物质或元 素在正常使用的条件下不会发生外泄或突变，用户使用该电子信 息产品不会对环境造成严重污染或对其人身、财产造成严重损害 的期限。 This logo refers to the period (10 years) during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate so that the use of these [substances or elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. DC190_93_UM_V1.
