User guide

14
15
Setting the Wake Mode
 e Daybreak Duo has six wake modes available for
each wake time, shown in the diagram to the right.
• Press the WAKE 1 or WAKE 2 button to select the
desired wake mode for that wake time.
OR
1 Press SET.
2 Press the WAKE 1 or WAKE 2 touch screen button. The
current wake time will flash.
3 Press the MODE touch screen button to select the desired
wake mode.
NOTE: If the Wake 1 and Wake 2 modes are both set to
perform a sunrise simulation, and the sunrise times overlap,
then only the first wake time’s sunrise simulation will occur. For
example, suppose the sunrise duration is 30 minutes, Wake 1 is
set for 7:00 a.m. with sunrise, and Wake 2 is set for 7:20 a.m.
with sunrise and radio. In this example, only the Wake 1 time’s
sunrise simulation will start (at 6:30 a.m.). Since the Wake 2
mode also includes the radio, the Daybreak will still turn on the
radio at 7:20 a.m.
SNOOZE / NAP
SUNSET
SET
WAKE 1 WAKE 2
VOLUME
1
)
Combinations
2
)
3
)
4
)
5
)
6
)
Sunrise
Chime
Radio
Off
SNOOZE / N
A
SUNSET
SET
WAK E 1
1
32
Using Your Daybreak
Using Your Daybreak
Setting the Sunrise or Sunset Duration Time
The Daybreak is set from the factory to provide a 30 minute sunrise and sunset. The sunrise and sunset
duration times can each be changed in 15 minute increments ranging from 15 to 120 minutes.
1 Press SET.
2 Press the SUNRISE or SUNSET touch screen button. The current duration time in minutes will flash.
3 Press the or touch screen button to adjust the duration.
4 Press the ENTER touch screen button when finished or wait 10 seconds. A double beep will confirm
the set duration time.
SNOOZE / N
A
SUNSET
SET
WAKE 1
1 234