quick start Guide

4
Register additional handsets
Note
•If the PIN/passcode is incorrect or no base is found
within a certain period, your handset displays a
noticationmessage.Repeattheaboveprocedureif
registration fails.
•The preset PIN/passcode is 0000. No change can be
made on it.
You can register additional handsets to the base
station.
Auto registration
Place the unregistered handset on the base station.
»
The handset detects the base station and
registers automatically.
»
Registration is complete in less than 2 minutes.
The base automatically assigns a handset
number to the handset.
Manual registration
1 Select [Menu] >
> [Register], then press
[OK]toconrm.
2 Press and hold on the base station for 5
seconds.
3 Enter the system PIN/passcode. Press [Clear] to
make corrections.
4 Press [OK]toconrmthePIN/passcode.
»
Registration is complete in less than 2 minutes.
The base automatically assigns a handset
number to the handset.