Short user manual D460 D465 Philips cordless phone Philips cordless phone with answering machine Register your product and get support at www.philips.
Important safety instructions Warning • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • Refer to safety information before using the product. • Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
1 Overview In call Enter the option menu. Change the sound profile. Adjust the volume. Recall (network dependent). End calls. Enter a pause (press and hold). Turn the speaker on/off. Mute/unmute the microphone. Standby In menu Access the main menu (press and hold when there is a new event). Confirm / Select / Enter the option menu. Access the redial list. Up / down Phonebook Call log Make and receive calls. Access the network voice mail (network and country dependent) (press and hold).
2 Connect 1 2 The base station allows connection to a power bank as an alternative source of power during AC power outage. 3 Multi-handset version only.
3 Get started Insert batteries Charge your phone Configure your phone 1 When using your phone for the first time, you see a welcome message (country dependent). 2 Set the country and language ifa prompted. 3 Set the date and time. • If the time is in 12-hour format, press / to select [am] or [pm] (country dependent).
4 Enjoy Phonebook Add record 1 Press [Menu] > [Phonebook] > [Add new]. 2 Follow on-screen instructions. Call from the phonebook 1 Press . 2 Select a record and press . Call from the direct access memory Press and hold on the keys in standby mode. The availaibility of direct access memory is country dependent. Call log Call from the call log . 1 Press 2 Select a record and press . View record > [Option] > [View]. Press Save record > [Option] > [Save number]. 1 Press 2 Follow on-screen instructions.
5 Learn more Silent mode Sets time during which the phone will not ring. [Privacy mode] > [Silent mode] MySound Customizes the sound of voices to your liking. [Sounds] > [MySound] Eco/ECO+ mode Reduces transmission power and radiation (causes 2 seconds ring delay, 50% shorter standby time). [Phone setup] > [Eco mode]/[ECO+ mode] Call barring Prevents unwanted outgoing calls to selected numbers.
Technical data Battery Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries Use only the supplied batteries. Adapter (base and charger) Input: Output: SPPS: 5 Vdc 100-240 V~ SSY050050-UK 50/60 Hz 200 mA 500 mA Alternative power source Power bank: output: 5 Vdc 500 mA (minimum) Phonebook with 50 entries Call log with 50 entries Talk time: 16 hours Standby time: 250 hours RF output power: < 24 dBm Frequency band: 1880 MHz ~ 1900 MHz Note You can find the Declaration of Conformity on www.p4c.philips.
Frequently asked questions My handset displays [Searching] or [Unavailable], or [Register your Handset], what do I do? • Make sure that the base station has power supply. • The handset is out of range. Move it closer to the base station. • The handset is not paired with the base. Register the handset to the base station. If I fail to pair (register) the handset or additional handsets to the base station, what do I do? > • Your base memory is full.
www.philips.com/support To access the user instructions online, use the reference model number written on the product label at the bottom of the base station.
Copyright © Gibson Innovations Limited 2017. All rights reserved. This product has been manufactured by and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. UMS_D460/465 05_EN_V1.0 WK17233 This symbol on a product means that the product is covered by European Directive 2012/19/EU.
