Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Your phone What is in the box Overview of the phone Overview of the base station Switch between uppercase and lowercase 3 4 4 5 6 3 Get started 7 Connect the base station 7 Insert the supplied batteries 8 Configure your phone (country dependent) 8 Change the remote access PIN (for D315) 9 Charge the handset 9 Check the battery level 9 What is standby mode? 10 Display icons 10 Check the signal strength 10 Switch the handset on or off 11 4 Calls Make a call Ans
12 Services 29 29 29 29 29 30 30 30 30 31 31 13 Technical data 32 14 Notice 33 33 33 33 Call list type Auto conference Network type Auto prefix Select the recall duration Dial mode Auto clock Register additional handsets Unregister the handsets Restore default settings Declaration of conformity Use GAP standard compliance Compliance with EMF Disposal of your old product and batteries 33 15 Frequently asked questions 35 16 Appendix 37 37 Text and number input tables 2 EN
1 Important safety instructions Power requirements • This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. • The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning •• The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet.
2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Power adapter** What is in the box Line cord* Guarantee Handset** 4XLFN VWDUW JXLGH Short user manual Base station (D310) Note •• * In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
Overview of the phone e • • a f m l k b c d • g j i h • e f g Press to enter a space during text editing. Press and hold to lock/unlock the keypad in standby mode. Press and hold to enter a pause when making a call. Switch to upper/lower case during editing. (for D310) or / (for D315) Mute or unmute the microphone. Access to the answer machine menu in standby mode (for D315 only). • Listen to new messages from the answering machine (for D315 only).
Decrease/increase the speaker volume. Overview of the base station e f D310 g a a • • Press to find handsets. Press and hold to enter the registration mode. D315 a b c d e f g a Speaker (back of the base station) b c d 6 • • Press to find handsets. Press and hold to enter the registration mode. • • Delete the current playback message. Press and hold to delete all old messages. / EN / Skip backward/forward during playback. • • Play messages. Stop messages playback.
3 Get started D310 Caution •• Make sure that you have read the safety instructions in the 'Important safety instructions' section before you connect and install your handset. Connect the base station Warning •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the phone. •• Use only the supplied power adapter to charge the batteries.
Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Use only the supplied batteries. •• Risk of decreased battery life! Never mix different brands or types of batteries. Note •• Charge the batteries for 8 hours before first use. •• If the handset becomes warm when the batteries are charging, it is normal. Warning •• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.
2 Select a language, then press MENU/OK to confirm. »» The setting is saved. Charge the handset Set the date and time 1 2 3 4 5 Press MENU/OK. Select [Phone setup] > [Date & time], then press MENU/OK to confirm. Press the numeric buttons to enter the date, then press MENU/OK to confirm. »» The time setting menu is displayed on the handset. Press the numeric buttons to enter the time. • If the time is in 12-hour format, press / to select [am] or [pm] (Country dependent). Press MENU/OK to confirm.
The handset turns off if the batteries are empty. If you are on the phone, you hear warning tones when the batteries are almost empty. The call gets disconnected after the warning. It flashes when receiving incoming call. It remains steadily on when you are in a call. The speaker is on. The ringer is off. What is standby mode? Your phone is in standby mode when it is idle. The standby screen displays the handset name or date and time, and handset number.
Note •• When ECO+ is on, the signal strength is not displayed. Switch the handset on or off Press and hold off.
4 Calls Note •• The talk time of your current call is displayed on the call timer. •• If you hear warning tones, the phone is almost out of Note •• When the power fails, the phone cannot access battery or out of range. Charge the battery or move the phone close to the base station. emergency services. Tip •• Check the signal strength before you make a call or when you are in a call.
Adjust the earpiece/speaker volume Press / to adjust the volume during a call. »» The earpiece/speaker volume is adjusted and the phone is back to the call screen. Mute the microphone 1 2 Press during a call. »» The handset displays [Mute on]. »» The caller cannot hear you, but you can still hear his voice. Press again to unmute the microphone. »» You can now communicate with the caller. Answer a second call Note •• This service is network dependent.
5 Intercom and conference calls 2 An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation between you, another handset user and the outside callers. Switch between calls Make a call to another handset Note •• If the base station only has 2 registered handsets, press and hold 1 2 3 4 Press and hold to switch between the outside call and the intercom call.
During the conference call 1 2 Press and hold to put the external call on hold and go back to the internal call. »» The external call is put on hold. Press and hold again to establish the conference call again. Note •• If a handset hangs up during the conference call, the other handset remains connected to the external call.
6 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers 1 2 3 Press once or several times on the alphanumeric key to enter the selected character. Press REDIAL/C to delete a character. Press and hold REDIAL/C to delete all characters. Press and to move the cursor left and right. Press to add a space. Note •• For information on key mapping of characters and numbers, see the chapter 'Appendix'.
7 Phonebook This phone has a phonebook that stores up to 50 records. You can access the phonebook from the handset. Each record can have a name up to 14 characters long and a number up to 24 digits long. There are 2 direct access memories (keys and ). Depending on your country, keys and are preset to the voice mail number and information service number of your service provider respectively. When you press and hold on the key in standby mode , the saved phone number is dialed automatically.
Add a record Delete a record Note •• If your phonebook memory is full, the handset displays a notification message. Delete some records to add new ones. •• The phonebook overwrites the old number with the new number. 1 2 3 4 Press MENU/OK. Select [Phonebook] > [Add new], then press MENU/OK to confirm. Enter the name, then press MENU/OK to confirm. Enter the number, then press MENU/OK to confirm. »» Your new record is saved. Tip •• Press and hold to insert a pause.
8 Call log 3 The call log stores the call history of all missed or received calls. The incoming call history includes the name and number of the caller, call time and date. This feature is available if you have registered to the caller ID service with your service provider. Your phone can store up to 20 call records. The call log icon on the handset flashes to remind you of any unanswered calls. If the caller allows the display of his identity, you can view his name or number.
2 3 4 Select a record, then press MENU/OK to confirm. Select [Delete], then press MENU/OK to confirm. »» A confirmation request is displayed on the handset.. Press MENU/OK to confirm. »» The record is deleted. Delete all call records 1 2 3 4 20 Press . »» The incoming call log is displayed. Press MENU/OK to enter the options menu. Select [Delete all], then press MENU/OK to confirm. »» A confirmation request is displayed on the handset.. Press MENU/OK to confirm. »» All records are deleted.
9 Redial list The redial list stores the call history of dialed calls. It includes the names and/or numbers you have called. This phone can store up to 10 redial records. View the redial records Press REDIAL/C. Redial a call 1 2 2 3 4 Select [Delete], then press MENU/OK to confirm. »» A confirmation request is displayed on the handset.. Press MENU/OK to confirm. »» The record is deleted. Delete all redial records 1 2 Press REDIAL/C. Select a record, then press . »» The number is dialed out.
10 Phone settings You can customize the settings to make it your own phone. Sound settings Set the handset's ringtone volume Set the docking tone Docking tone is the sound made when you place the handset on the base station or charger. 1 2 3 You can select among 5 ringtone volume levels or [Off]. 1 2 3 Press MENU/OK. Select [Phone setup] > [Sounds] > [Ring volume], then press MENU/OK to confirm. Select a volume level, then press MENU/ OK to confirm. »» The setting is saved.
Note •• Make sure that all the handsets registered to the base station are D310/D315 in order to have the ECO+ feature functioning properly. •• When ECO+ is activated, the standby time is reduced. This is because in ECO+ mode the base station is not transmitting any signal in standby mode; therefore the handset needs to “listen” more frequently for signals from the base station to detect incoming calls or other requests from the base station.
11 Telephone answering machine Through the base Press to turn the answering machine on or off in standby mode. Note •• When the answering machine is switched on, it answers Note incoming calls after a certain number of rings based on the ring delay setting. •• Available only for D315. Your phone includes a telephone answering machine that records unanswered calls when it is on. You can access the answering machine remotely and change the settings through the answering machine menu on the handset.
»» The setting is saved. Listen to the announcement 1 Note •• If the memory is full, the answering machine switches to [Answer only] mode automatically. 2 3 Announcements The announcement is the message your caller hears when the answering machine picks up the call. The answering machine has 2 pre-recorded announcements: [Record also] and [Answer only]. 4 1 2 3 4 5 6 Press / Machine]. or MENU/OK > [Answ. 1 2 4 Select [Record], then press MENU/OK to confirm.
Note •• If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the caller directly. •• If the memory is full, the answering machine switches to [Answer only] automatically. Delete old messages to receive new ones. Listen to the incoming messages You can listen to the incoming messages in the sequence they are recorded. From the base • To start/stop listening, press . • To adjust the volume, press / .
2 Note •• Make sure that the answering machine is switched on before this feature can be applied. Select [Remote access] > [Change PIN], then press MENU/OK to confirm. 3 Enter the old PIN, then press MENU/OK to confirm. 4 Tip •• When you access the answering machine remotely, you are recommended to set the ring delay to [Toll saver] mode. This is a cost effective way to manage your messages.
7 8 9 Switch the answering machine on. (not available when you listen to the messages). Stop listening to the message. Switch the answering machine off. (not available when you listen to the messages). Behavior of the LED display on the base station The table below shows you the current status with different LED display behavior on the base station. LED display Steady on Flashing Flashing (Fast) 28 EN Message status • There is no new message and the memory is not full.
12 Services The phone supports a number of features that help you handle and manage the calls. Call list type You can set whether you can view all incoming calls or missed calls from this menu. Network type Note •• This is a country dependent feature. It only applies to models with network type support. 1 2 3 Select the call list type 1 2 3 Press MENU/OK. Press MENU/OK. Select [Services] > [Network type], then press MENU/OK. Select a network type, then press MENU/ OK. »» The setting is saved.
Note 3 •• To enter a pause, press and hold . •• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls. •• The feature is unavailable if the dialed number starts Select a dial mode, then press MENU/OK to confirm. »» The setting is saved. Note with * and #. •• If your phone is in pulse dial mode, press during a call for temporary tone mode. Digits entered for this call are then sent out as tone signals.
Note 2 •• For models with an answering machine, you hear a confirmation beep. »» Registration is complete in less than 2 minutes. The base automatically assigns a handset number to the handset. 3 Select [Services] > [Reset], then press MENU/OK to confirm. »» A confirmation request is displayed on the handset. Press MENU/OK to confirm. »» All settings (except the phonebook and direct access keys information) are reset.
13 Technical data General specification and features • Talk time: 16 hours • Standby time: 250 hours • Range indoor: 50 meters • Range outdoor: 300 meters • Phonebook list with 50 entries • Redial list with 10 entries • Call log with 20 entries • Answering machine with 60 minutes recording time • Caller identification standard support: FSK, DTMF Battery • Philips: 2 x AAA Ni-MH 1.
14 Notice Disposal of your old product and batteries Declaration of conformity Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC.
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
15 Frequently asked questions No signal bar is displayed on the screen. •• The handset is out of range. Move it closer to the base station. •• If the handset displays [Unregistered], register your handset. Tip •• For further information, see the chapter 'Services', section 'Register additional handsets'. If I fail to pair (register) the additional handsets to the base station, what do I do? Your base memory is full. Unregister the unused handsets and try again.
•• The phone receives interference from the nearby electrical appliances. Move the base station away from them. •• The phone is at a location with thick walls. Move the base away from them. The handset does not ring. Make sure the handset ringtone is turned on. The caller ID does not display. •• The service is not activated. Check with your service provider. •• The caller's information is withheld or unavailable.
16 Appendix Text and number input tables Key 0 1 2 3 4 5 6 7 8 9 Key 0 1 2 3 4 5 6 7 8 9 Upper case characters (for English/ French/German/Italian/Turkish/ Portuguese/Spanish/Dutch/Danish/ Finnish/Norwegian/ Swedish/Romanian/ Polish/Czech/Hungarian/Slovakian/ Slovenian/Croatian/ Lithuanian/Estonian/ Latvian/Bulgaria) Space . 0 , / : ; " ' ! ¡ ? ¿ * + - % \^ ~| 1 @ _ # = < > ( ) & € £ $ ¥[ ] { } ¤ § ...
3 4 5 6 7 8 9 38 def3èéΔΦ ghi4ìΓ jkl5Λ mno6ñöò pqrs7ΠΘΣß tuv8ùü xyz9øΩΞΨ EN
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
