operation manual

64 Messages
Bearer
This menu allows you to select the type
of network used when launching a con-
nection.
If selecting
GPRS first
, you must have configured both
the GSM and GPRS settings (see “Access settings”
page 43).
MMS Centre
Allows you to enter or change the MMS address of the
server your phone will connect to.
Gateway address
Allows you to enter or change the IP address of the
server’s gateway.
Gateway port
Allows you to enter or change the Port number of the
server’s gateway.
You must have the information relating to the three
points above, supplied by your operator, and must enter
them exactly as given.
MMS Settings
Retrieval mode
GSM
Your mobile will only use the GSM
network for connections.
GPRS
Your mobile will only use the GPRS
network for connections.
GPRS first
Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn’t available when connecting.
Bearer
Automatic
(default
mode)
Any new MMS you receive is automatical-
ly downloaded from the server and placed
in the
Inbox
, without you having to launch
a connection. Select the message you have
received in the
Inbox
and press
>
.
This mode is deactivated when roaming.