operation manual

52 Messages
Contact your ISP to know what type of number you
should select.
Auto disconnection
: allows you to select an inactivity
time period after which the phone automatically dis-
connects (if a connection was is progress) from the net-
work. Press
<
or
>
to select a value from 3 to
10min. and press
,
to validate.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the inactivity
time period leading to auto disconnection.
Login
and
Password
were up to you when you sub-
scribed to your account. Enter them also as defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
1.
Press
,
, select
Messages
>
E-mail
>
Mailbox 1
>
Settings
and press
,
.
2.
Select
E-Mail server
and press
,
. The fields to
be completed are the following:
POP3 address
,
SMTP address
,
Login
,
Password
and
E-Mail address
.
•
POP3 address
: allows you to enter the IP or DSN
address of the POP3 server, which is used to
receive e-mails.
•
SMTP address
: allows you to enter the IP or DSN
address of the POP3 server, which is used to send
e-mails.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not
your e-mail provider,
contact your operator to get the correct address of the SMTP
server and enter it in this field.
In some cases,
Login
,
Password
and
E-mail address
are up
to you when you subscribe to your account. Enter
them as defined.
Advanced
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn’t have to change any of them.
If the fields of these menus are empty, or if you encoun-
ter connection problems, contact your ISP.
Port POP3
: allows you to enter the POP3 port number,
which is used to receive e-mails.
Port SMTP
: allows you to enter the SMTP port
number, which is used to send e-mails.