User guide

Text and number entry 23
When the zhuyin combination appears on the input
row, press </> to move the selection box over the
zhuyin combination and press , to enter character
selection mode.
Selection
Press </> to move the selection box left or right, and
press +/-
to scroll list. When the s election box is on the
desired character, press , to confirm the input and go
into association input mode.
Association
The input area is empty and the candidate area displays
a list of association characters. Press the navigation keys
to select an association character, or press a number key
to input a new zhuyin combination.
Stroke input
Press * to select stroke input mode. The strokes are
represented on each key as follows:
The basic steps of Stroke input are as follows:
The principle of stroke input is to dissect and separate
every stroke of a chinese character according to
sequence. When you wish to input the character, press
the keys corresponding to the required strokes
according to sequence to get the desired character.
1
2 Horizontal
3
4 Left-falling 5 Vertical 6 Right-falling
7
8 Over-down 9 Special
* Mode
0 # Punctuation
1. Enter strokes 2 to 9
(excluding 3 and
7 ) R Clear to
clear.
2. Select from candidate list
< or > / + or -
( scroll list)
3. Confirm selection ,
4. Select and enter association character, or
return to step 1 to enter new strokes.
5. Or press R Back to exit from association
character input mode, then press
, to complete the
editing.