Charge headset jack and USB Memory card slot Shortcuts Stylus Earpiece Touch Screen Navigation keys (1) Left softkey Call and pick up key Right softkey Hang up and on/off key Keypad Camera key Back of the phone:camera lens (1) Navigation keys will be represented in the manual by . the following signs: Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice.
Adjust conversation Press volume during a call. Switch to silent mode Press and hold mode. in idle Lock the keypad Press and hold mode. in idle Unlock the keypad Press then press Access the Press in idle mode. Access the Press in idle mode, "Call logs" display your recent "Missed Calls", "Dialed Calls" and "Received Calls". Access the Long press Quickly return to Press idle . in idle mode. . There are five permanent hard icons at the bottom of the touch screen. To access the main menu.
! " $ %& & ! % ) * ' & $ /' 0 % " * 0$ ' - - ' ! $ 6 + , 1 ! 7 8 * ( ( ( + + + . 1 5 5 - # 7 ' ' 7 23 4 # ( ( + , , . .
" * 8 9 5 -) ' $ 0 8 9 + ' ' " ' & ' 6 $ - ) ' ' & & ! & , 83 5 2 * 2: ( + + + , , , . . # ( + + + , , . . . #1 #1 #1 ; ! # # 2 ! ' ' & ! ' & $ #( #, #.
! 3. Hold the latch to lift up the battery. 4. Place the SIM card in its slot, with the golden contacts facing downwards. Please read the safety instructions in the "Precautions" section carefully before using. Before using your phone, you must insert a valid SIM card supplied by your operator or retailer. The SIM card contains your service details and memory in which you can store phone numbers and messages. " 1. 2. #" Make sure that the phone is switched off.
5. With the metallic contacts facing downwards, press the battery into its slot until it locks into place. Pull the stylus out of its holder as follow: If you draw out the stylus, you will use it more comfortably. 6. Replace the back cover by sliding up into its slots until it stops. # % Please use special Philips. Mostly, using the stylus likes using a mouse on a computer except writing.
To prevent scratch the screen, do not use an actual pen, pencil or other sharp objects instead of stylus. # Press and hold until the power-on/off animation is showed on the screen. When switch on the phone, the phone may remind you to enter the PIN code. The PIN code is predefined and supplied by your operator or retailer. To personalize the PIN code, see "Change Password" on page 47. If you enter an incorrect PIN code for three times, your SIM card is blocked.
2. 3. The battery symbol indicates the state of charge. When the battery is fully charged, you can disconnect the charger by unplugging it. 3. To remove the Micro-SD card, gently press the top of it inside its slot. When it pops up, you may remove it from the phone. If you don’t use the phone for a long time, please fetch out the battery. Keeping the charger plugged to the mobile won’t damage the battery after it is fully charged. " 1. 2. ' ( # Remove the protective rubber cap outwards.
stored in SIM phonebook, then press number. ) to dial the * In idle mode, press to access Call Logs list. Select a number and press to dial the number. 1. 2. 3. In idle mode, enter the phone number directly, or tap or then tap numbers on the onscreen keyboard. Tap or press to dial the number, or tap access the phonebook to find the number. Tap Abort or press to end the call. For an international call, press * twice quickly to enter the "+" symbol as the international prefix. 1. 2.
$ #" Switch on your phone, the screen shows "Insert SIM", press SOS to dial emergency call. In Europe the standard emergency number is 112, in the UK it is 999. Hang up: press . During a call, tap Option or press following options. to access the + / To access the phonebook. If you apply the function of the caller ID, the number of the caller will be displayed while receiving a call. If the number has been stored in phonebook, then the corresponding name wil be displayed instead of the number. 1.
Press To answer the second incoming call (while the first one is put on hold). Then press , and select: • Swap to toggle between calls, • Conference to introduce a new caller into the conference call. Press To end the current call, then answer the incoming call. The ability to handle two or more calls at one time and to make conference calls. The function depends on your operator and subscription. You can make a second call during an active call or with a call on hold.
/ To activate the silent mode, press and hold until the message of "Silent Activated" and icon shows on the screen. To deactivate the silent mode, press and hold again until the suggestive message shows on the screen and the icon disappears. After insert a memory card into the slot, you have two memory, which can be identified by PC however you shut the phone or not . The capacity of the phone memory is 11MB. 1. Connect the phone with PC via the USB cable. 2.
1 2 You can select the input methods to enter English words, symbols and numbers. The icons appeared on the screen indicate the active text mode. To switch the input method. The following table lists the operations of the various icons in editing interface: To unfold the analog keypad. To fold the analog keypad. # To unfold/fold the analog keypad of symbols. There are three methods to switch the method in editing interface: 1. Tap the input icon on top left corner of the screen; 2. Press to switch.
/6& To select this method, press until "ABC" or "abc" appeared on the screen. It requires multiple key press to reach the desired character. For example, the letter "h" is the second letter on the key 4, so you must press it twice to enter "h". If two letters in turn are on the same key, just wait a few seconds for the cursor to appear. 2 4 5- 54 Please press key 4, 4 ( H ) 6, 6, 6 ( 6O), 6 (M6/), 3, 3 ( E4).
9 + Chat # # Copy All To copy all messages to another memorizer. * ll To move all messages to another memorizer. All You can send text messages by using the Short Messaging Service(SMS) and manage the messages you sent and received. " 2 To delete the selected message. )' To reply to the sender. 4 $ To edit and forward the selected message. To edit the selected message. ' % To copy the selected message to another memorizer . * % To move the selected message to another memorizer.
' % To copy the selected message, then store in other memorizer. * % To move the selected message and store in other memorizer. Delete All To delete all messages in outbox. Copy All To copy all messages to another memorizer . * ll " " ") ! 1. / To link to the web address in the message. It won’t display "Copy to SIM" and "Move to SIM" until the message is stored on SIM card, or vice versa. $ To compose and send a SMS, follow the steps detailed below: To save the message to outbox.
In this menu, the phone predefine up to ten messages that you use frequently when writing a new message. Select a message, tap Ok or press to access the following options: 8 To edit the selected message. 8 To delete the selected message. To select your default SMS centre. If it isn’t predefined on your SIM card, you must enter your SMS centre number. 7 To use the selected template to write a new message. 2' To display the storage status of the messages saved in SIM card and phone.
)' When On, this option can transmit the number of your SMS message centre together with the message. The recipient can reply to you by using your own SMS centre instead of theirs. This speeds up the rate of transmission. This feature depends on your subscription. To dial the selected number. To edit a SMS and send it. * ! - To edit the selected number and you can save it to phonebook. 8 To edit the selected number. To delete the selected number.
& To show the cost of the last call made. The data of the Call Time, Call Cost, SMS Counter and GPRS Couter is only for reference. Please follow the actual bill previded by your operator or retailer and ask your operator for more information. To show the total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set via the Max Cost option, you will no longer be able to make any calls until you reset the counter.
You can use this function to delete contacts. When you select From SIM or From Phone to delete, you must input the phone lock password. The initial phone lock password is 1122. From SIM To delete all contacts from SIM. From Phone To delete all contacts from the phone. One By One To delete contacts one by one. & To group the contacts in phone book in order to be convenient for users. 1. Select a group, tap Ok or press . 2. Select the corresponding option to modify.
& To edit your vCard and select whether to send to others. & To select the displayed picture during incoming call. & To select the ring tone during incoming call. & To select the played video during incoming call. To display the total number of contacts stored in each phonebook and the capability of them. Tap Name or press to access the contacts you have stored in idle mode. Press the corresponding key of the first letter of the name to search (e.g. press 9 three times to access the letter "Y").
!< To edit the content of the message. You can add text, image, sound and attachment. 8 2. To set the subject of the message. Tap Done or press to finish editing and access to the following options: To send the message. / To save the message to outbox as send the message. * * & /' 83 " To save the message to drafts. )' To reply to the sender. )' To reply to all senders including To, and Cc columns. 4 $ To edit and forward the selected message. Delete To delete the selected message.
/ ) % To send the message to others. If the message has not been sent successly, it will show Resent. ' To take the selected template as a new message. To delete the message. To delete all messages in outbox. " 6 ! To save or dial the number of the sender and the number in the message. This menu is used to save all messages by selecting Save to Drafts. Select a message, tap Option or press to access its options as the outbox’s options.
: This menu is used to set mail server number and listen to voice mail. Firstly, please enter one of the voice mail server numbers supplied by your network service provider. When you receive a voice mail, your provider will send a message to your phone. Select an item, tap Option or press to access the following options: Please set the email configuration before sending and receiving from your email server provider. $ To compose and send an email, follow the steps detailed below: 1.
* ? $ * & To save the email to drafts. To quit the edit interface without saving. The network of your mailbox may not support sending email from the phone, then it possibly will shows that sending email failed. # " 2 You can read received email messages in the menu. )' To reply to the sender with the original text. The email messages won’t be stored in the menu until you select Sand and Save after editing. )' $ To reply to the sender without the original text.
+ # & 6 To select your data account. Please select "GPRS", then select your local network. $ = $ * To select the interval of receiving email automatically. To set the most download capability. * To input your name. " $ / ' To set server’s IP address or computer’s name of sending email. To set server’s IP address or computer’s name of receiving email. To set the port of receiving email. * / To input your password. " - 6 To input your name.
23 To input the signature text. & This function is used to chat with your contact by SMS. 1. Select a chat room, then tap Ok or press . 2. Select Chat Room Info, enter my nickname and destination number, then tap Ok or press . 3. Select Start New, enter the message and send it to start chatting. receive the broadcast message. Otherwise, you can not receive messages. ' To read broadcast messages after activating receive mode. 0 To set the language of the message that can be received.
; To play the selected video. To pause. : To play by the full screen. You can use this player to view the videos you record or prestored in your phone. 1. Select a video file, tap Option or press to access the following options: To play the video. To cut the current picture of playing and save into the imageviewer. To adjust the playing speed. It is only voiced by 1 playing speed. 4 $ To apply the video to other options. ) To rename the video. To recede quickly. To delete the video.
answer a call during listening to the music and the player will be paused automatically while you are talking. In order to play all files successfully, please store them in the "My Music" folder of the memorys. / / / You must set Off in the List Auto Gen option of the andio player settings before add. 1. 2. / 1. 2. Select the music from the other folder and access its option menu. Select Add and press , then select My Music to add it to the andio player.
Include the source of the music, List Auto Gen, Skin, Repeat (Music repeat mode in playing), Shuffle (Playing order), Background Play (Whether to continue playing when you exit from audio player), Audio Equalizer, Spectrum Display Style and Lyrics Display. Only those music tracks saved in the root directory folder of the File Manager can be autogenerated by selecting the Refresh List option. To retrieve tracks from the subfolders, you need to deactivate List Auto Gen in the Settings option.
/ Tap Option or press to access the following options in video recorder. 2 To access Video Player. To set White Balance, EV, Night Mode, Frequency. 7 To set Video Quality,File Size Limit, Rec Time Limit, Record Audio, Encode Format. 8& & To set special effect for the video. Press and hold or tap in idle mode or select Camera and press to activate the camera. When the camera is activated, the preview screen is displayed.
6 To set Image Quality 7 To set Image Size 1. 2. Frame your picture and press to take the picture. While the picture is taken, a view screen is displayed. Then press to save the picture, press to ignore the picture. - & This section describes in detail the option menu in camera mode. 2 7 $ To access ImageViewer. To set Shutter Sound, Exposure, Banding, Delay Time, Cont Shot. To set Image Size and Image Quality. 5 To select White Balance.
/' 4 4 To open the folder. You can select a file or folder to do the following operation. • Operations to file Play(for music file), View(for image file), Forward, Detail, Rename, Copy, Move, Delete, Delete All Files and Sort. • Operations to folder Open, Create Folder, Rename, Delete and Sort. Create a new folder in the file folder. You can also organize your files into subfolders. Select a folder under which you want to create a subfolder.Press and select Create Folder.
4 $ To apply the memo to other options. 2. - Deactivate it: Enter one or more notes after the vibra note, then press 8 and to deactivate it. To play the melody. This function is used to edit melody you like and set it as ring tone. If there is no melody, tap Add or press to create a new melody. 0 To insert a rest. 1-7 To enter Do-Si. 8 To insert vibra effect. 8+ To deactivate the vibra effect. To change pitch of the note to high, middle or low. To select a musical instrument.
" + When you take a picture and save it, the file is stored in this folder. You can use the navigation keys to view them. Select a photo, tap Option or press to access the following options: 7$ To view the picture of full screen. + You can edit your photoes or the prestored pictures. Select one photo from one memory, tap Option or press to access the following options: * To save the edited as a new one. To view the details of the picture. & 5 $ To set Browse Style as List Mode or Matrix Mode.
# You can use it to view photoes or pictures continuously as slide show. Select a foler, storing some photoes,tap Ok or press to access the following options: ) To resume to play. The menu isn’t displayed until press , or while playing. To play automatically. To set Type of Play, Speed, Effect, BGM, Horizontal View, Sound Effect.
< / This menu is used to set five alarm clocks, the operation is as below: 1. Select one alarm and access its edit interface. 2. Set the status (Off/On) , time and alarm type(Once/Everyday/Days), snooze interval and alert type(Vibra and Ring/Ring/Vibration Only), then tap Done or press to complete setting. After select Days, press or tap the next row to set status of each day in a week. The alarm clock will ring even if you turned off your phone.
$ This menu is used to check the time of main cities around the world. Tap , on the both sides of the city or press , to select a city, the local date and time will show on the bottom of the screen.The date and time are corresponding with your current date and time of the phone. % You can use conversion function of length and weight units. You can enter decimal point by pressing # Key, when processing units or currency of conversion. 1. It may display "Empty Folder" while you access it for the first time.
To sort all files separately by name, type, time or size. ' ' 0 ' ! To apply the global settingd for all files. To view the shortcuts of some keys during reading. # To select Split Timing, Lap Timing to clock(Up to 20 items) or select View Record to view the saved records. $ Tap the arrowhead icon or press the navigation key to start the corresponding stopwatch to reset the stopwatch. This menu supplies you with the reference of body mass index and female menstrual.
= # 0 To select the default language for all menu texts. You can use this menu to customise your phone settings and change their default values (time and date, security, etc.). + + To select the default encoding type for playing music and reading E-book rightly. To set home city, time/date and format. / 0 To select your local city. 2 % To adjust the current time and date. 4 To select their format. # To set the time to power on or off automatically.
Audio Player Alarm In idle mode,tap on the top left corner of the screen to change the current mode fleetly. User Profiles Tone Setup In idle mode, you can quickly access the set functions by pressing the navigation keys. / To update the time in your phone. The function depends on your subscription and network. To set the validation speed after writing and select the show color of the handwriting. # In this menu, you can modify the ten predefined items according to your demand .
+ $ To set the image displayed when power off. To set the background image of main screen displayed in idle mode. 0& To view and select the predefined image. " & To view and select the downloaded image. Select the path of the selected image,select Forward in its option menu, then select ToWallpaper to set. # To set the image displayed after being in idle mode for a stated time. To set Status(On/Off) and Waiting(set the time for the appearance of the screen saver image).
# To set whether to display the owner number in idle mode. # To set whether to display the operator name in idle mode. & To select the display clock type in idle mode, including analog clock and digital clock. In idle mode, to tap the clock is to access Set Time/Date, Alarm, Clock Type. % You can activate the corresponding user profile according to your environment and set some options of the selected mode, too. 1.
Whether to set Any Key to answer. $ To deactivate the function.And the phone won’t remind you and another penson who is dialing will hear the busy tone or the call will be diverted to another phone (If your phone is set to * &5 ). * The "Auto" option in Answer Mode shows only in Headset Mode. The Headset mode needs not to be activated. As long as you plug in the earphone, your phone will switch to the headset mode automatically. & & ? To query the current status of it.
& & You can restrict outgoing and incoming calls from your phone. This function is network dependent and need a specific password which is supplied by your service provider. To select whether to activate Call Time Reminder and set the periodic beeping time. / /& & To set from 1 to 3000 (seconds) as the beeping time. To select All Calls, International Calls or International Except Home. To set from 30 to 60 (seconds) as periodic beeping time. The phone will beep ,when in this time each minute.
& To restrict your correspondent.If the function is active, you can contact nobody but the users in the group.To contact your network provider for details. The function depends on your subscription and network. " + To set IP number in order to make IP calls. This function depends on your subscription and network. Contact your operator for configuration parameters. The function depends on your subscription and network.
# The function depends on your network. #" & When the SIM Lock is activated, you must enter the PIN code( the PIN code is supplied by the provider with the SIM card) every time the phone is powered on. If you enter an incorrect code for three times, you need to enter PUK code (PIN unlocking code). The PUK code is used to unlock or change the locked PIN code. If the PUK code is not offered or lost, you can contact the network provider.
If you cannot enter a correct PUK2 code within ten tries, the functions in connection with PIN2 code cannot be used anymore. - $ Phone Lock Password protects your phone against unauthorized use by other people. The password is necessary when you delete all data or restore factory settings. The initial phone lock password is 1122. Enter the phone lock password, then press confirm. to # To set the audio equalizer to change the audio effect.
> 2 You can modify the settings of the bluetooth, the WAP and so on. 6 Your phone supports the bluetooth commnication. It is a short-range wireless communication, the devices with bluetooth capabilities can exchange data, H-Free talk or telecontrol. The communication distance is about 10 metres and it maybe shorten with some physical bars between them. To search the bluetooth equipment as more as possibly. / To show the bluetooth equipment connecting yours now. # To set your pensonal or others info.
$/+ You can use WAP to browse the WAP sites on your phone. Before using it for the first time, you must set the WAP configuration. If your network operators modify the WAP settings or the network providers of the content modity the WAP address, it will result in you can’t view the Web, please ask them for the latest information. To set the detailed info of the GSM/GPRS date account. This menu helps you manage all kinds of things in your work or life.
! 2. The phone provide some games for you. Select one game, then press to access to the following options: 3. ) Continue to play the last game. The menu isn’t displayed until press , or while playing. 5 Select Rate Representation(The first line on the screen). Enter an amount in the Local fields, tap Ok or press to get the conversion value. Rate Representation option allows you to select the Rate you enter is the ratio of Local to Foreign or Foreign to Local. The result is only for your referrence.
" @ In idle mode, several symbols can be displayed simultaneously on the screen. If the network symbol isn’t displayed, the network is not currently available. You may be in a bad reception area, moving to a different location may help. - The more bars are shown the better the reception is. - You have received a new MMS message. - You have received a new voice 7 mail. ) - Your phone is connected to the GPRS network. activated. : ' 5 - The more bars you see, the more power you have left.
+ ' Your cellular mobile phone is a low power radio transmitter and receiver. When it is operating, it sends and receives radio waves. The radio waves carry your voice or data signal to a base station that is connected to the telephone network. The network controls the power at which the phone transmits. • The GSM network controls transmission power (0.01 to 2 watts). • Your phone complies with all relevant safety standards. Your cellular mobile phone is your responsibility.
the aircraft, disrupt the mobile phones network and may be illegal. • Use the ear opposite to the pacemaker to minimise the potential interference. Switch off your phone if you suspect that interference is taking place. In hospitals, clinics, other health care centres and anywhere else where you may be in the close vicinity of medical equipment. • In areas with a potentially explosive atmosphere (e.g. petrol stations and also areas where the air contains dust particles, such as metal powders).
• • battery and let them dry for 24hrs before using them again. To clean the phone, wipe it with a soft cloth. Placing and receiving calls consumes the same amount of battery energy. However, the mobile consumes less energy in idle screen when kept in the same place. When in idle screen and while you are moving, your phone consumes energy to transmit updated location information to the network.
8
2 ' 2 ' $ Remove and reinstall the battery. Make sure you plugged the jack of the charger into the correct connector. Then charge the phone until the battery icon has stopped scrolling. Finally, unplug from the charger and try to switch the mobile on. 2 ' $ Somebody tried to use your 5/ :8 $ phone but didn’t know the PIN $ code nor the unblocking code (PUK). Contact your service provider. A & #( * To receive all calls, make sure that none of the features in "Call divert" is activated.
' & > ! ' 6/2 / 8 Press and hold or switch off the phone, check that the SIM card and the battery are installed correctly and switch it on again. A ' E A Some features are network dependent. They are only available, therefore, if the network or your subscription supports them. Contact your operator for detailed information on this subject. ! You might be using a charger that was not intended for your phone. * Make sure you always use the Philips authentic accessory shipped with your phone.
+ Some accessories, such as a battery and a charger are included as standard in the package of your mobile phone. Other accessories might be sold in the commercial package (according to the operator or the retailer), or sold separately. As a consequence, the package content may vary. To maximise the performance of your Philips phone and not to void the warranty, always purchase Philips Authentic Accessories that are specially designed for use with your phone.
# / " ' " THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO RADIO WAVES. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy defined by the international standards.
Workmanship During The Limited Warranty Period? 0 1. What Does This Limited Warranty Cover? During the limited warranty period, Philips or its authorized service representative will, at its option either repair or replace, without charge for parts or labour, a materially defective Product with new or refurbished parts or Product and return such repaired or replaced Product to the Consumer in working condition. Philips will retain defective parts, modules or equipment.
b) c) d) e) f) g) h) 5.
OTHER WARRANTY WHETHER EXPRESS OR IMPLIED (WHETHER BY STATUTE, UNDER THE OPERATION OF LAW OR OTHERWISE) AND SPECIALLY DISCLAIMS ANY WARRANTY OF SATISFACTORY QUALITY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PHILIPS’ TOTAL LIABILITY FOR DAMAGES RELATING TO OR ARISING OUT OF THE PURCHASE OR USE OF THE PRODUCT, REGARDLESS OF THE TYPE OR CAUSE OF SUCH DAMAGE OR THE FORM OR CHARACTERISATION OF THE CLAIM ASSERTED (E.G.
