Earpiece Screen Memory card slot Left softkey Corfirm key Call and pick up key Navigation keys (1) Right softkey Charge headset jack and USB connector Hang up and on/off key Camera key Keypad Back of the phone:camera lens (1) Navigation keys will be represented in the manual by the . following signs: Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice.
Answer a call Press rings. when your phone Reject a call Press rings. when your phone End a call Press . Adjust conversation Press volume during a call. Switch to silent mode Press and hold mode. in idle Lock the keypad Flip close in any mode. Unlock the keypad Flip open in any mode or press and . Access the Press Access the Press Quickly return to idle Press in idle mode. in idle mode. . Some events may modify the idle screen (missed call, new message, etc.).
6 $ # ' * * - # ! ! # % & ( # ) # + %, % & ! ) # . % " $ $ ' ' * * - 7 7 # # ' + 6 ! #/ /0 # % &2 # &2 3# # . 6 1# 5 # # # * " " ! 4&5 $ $ 8 7 ! " $ $ ... .. .
2 ." .$ .$ .' .* 6 3 % # . / & # 8 0 * - # # 5 8 . 5 : 5 # / # 5 # . $ * # 8 9 6 1 8 9 2 % / 4 % , ! # ! ) & 6 "" $ $ ' ' ' * * * * * + " .
Please read the safety instructions in the "Precautions" section carefully before using. Before using your phone, you must insert a valid SIM card supplied by your operator or retailer. It contains your service details and memory in which you can store phone numbers and messages. ! 1. 2. 3. 4. Place the SIM card in its slot, with the connectors facing towards the phone. 5. Pnsert the battery into its slot press it into place. "! Make sure that the phone is switched off.
. Replace the cover by sliding down into its slots unti it stops. " Press and hold until the power-on/off animation is showed on the screen. When switch on the phone, the phone may remind you to enter the PIN code. The PIN code is predefined and supplied by your operator or retailer. To personalize the PIN code, see "Change Pwd.". battery is empty, the battery symbol indicators will reappear after the battery is charged up for 2 or 3 minutes. 1.
4. When the battery is fully charged, you can disconnect the charger by unplugging it. Keeping the charge plugged to the mobile won’t damage the battery after it is fully charged. ! 1. 2. " $% % % Revolve and remove the gluey plug off the slot first . Check that the gold contacts of the card face upwards, then insert into the slot . 3. If you want to remove the card, pushing it into slot gently, then the card will rebound automatically.
& ' % In idle mode, press to access Call Logs list. Select a number and press to dial the number. ! ( % 1. 2. 3. % In idle mode, enter the phone number, press to correct an error. Press to dial the number. Press to end the call. For an international call, press * twice quickly to enter the "+" symbol as the international prefix. % 1. 2. In idle mode, press to access the list. Press or to select a contact in the list, then press to dial the number (To see "Phone Book" for more information).
) "! Switch on your phone, the screen shows "Insert SIM", press SOS to dial emergency call. 2. Reject the call: press . If you have activated Call Divert, the call is diverted to another number or voice mail. Hang up: press . In Europe the standard emergency number is 112, in the UK it is 999. 3. - During a call, press following options. If you apply the function of the caller ID, the number of the caller will be displayed while receiving a call.
+ During a call, press Options to enter other menu for viewing or editing , for instance, messages and so on. Press To answer the second incoming call (while the first one is put on hold). Then press , and select: • to toggle between calls, • to introduce a new caller into the conference call. Press To reject the call. Press End the current call, then answer the incoming call. Press To open the options list. You can select End to end the current call, then answer the incoming call.
- % To activate the silent mode, press and hold until the message of " & ! " and icon shows on the screen. To deactivate the silent mode, press and hold again until the suggestive message shows on the screen and the icon disappears. % % After insert a memory card into the slot, you have two memory. % % Connecting the phone with a computer, the memory will be identified by the PC. 1. 2. Connect the phone with PC via the USB cable.
0 The table below describe the complete menu tree of your mobile phone.
MMS Write Message/Inbox/ Outbox/Draft/Template/ Memory Status/Message Settings Chat Call Settings Caller ID/Call Waiting/Call Divert/Call Barring/ Line Switching/Call Time Display/Auto Redial/ Call Time Reminder/IP Number/Black List Voice Mail Server Network Settings Select Network/Preferred Networks/GPRS Connection Broadcast Message Receive Mode/Read Message/Languages/Channel Setting Security Settings SIM Lock/Phone Lock/Fixed Dial/Barred Dial/ Change Password Settings (Page 37) Restore Factory Sett
To Do List World Clock Unit Converter Weight/ Length Settings Preferred Storage Location/My vCard Memory Status Profiles (Page 51) Currency Converter General Health BMI/Menstrual Meeting Contacts (Page 49) Quick Search Add New Entry Outdoor Indoor Headset Copy All Delete All Caller Group Friends/Family/VIP/Business/Others Special Number My Number/ SOS Number # .
1 2 % You can select the input methods to enter English words, symbols and numbers. The icons appearing on the screen indicate the active text mode. Press to switch the input method in editing interface. 5 Alphabets and symbols represented by each key are as follows: To delete the characters or end the editing mode. To confirm input or enter option menu. "% 2% To move the cursor, select letter, word or symbol from the list. 1. To return to idle mode. 2. 3. To enter the symbols list.
method requires multiple key press to reach the desired character.For example, the letter "h" is the second letter on the key 4, so you must press it twice to enter "h". If two letters in turn are on the same key, just wait a few seconds for the cursor to appear. You can press key 0 to insert a space in multitap ABC/abc input. 2% 3 4+ 43 Please press key 4, 4 ( H ) 6, 6, 6 ( 3O), 6 (M3(), 3, 3 (6E1). Letters, numbers and symbols are located on each key as shown in the table below: 7 # 1 .
9 % % The phone provide some games for you. Select one game, then press to access to the following options: Continue to play the last game. # The menu isn’t displayed until press , or while playing. Enter the game mode and start game. Minute your best score. 2 ) Detailed rules for playing this game. % This menu is used to turn on or turn off the audio and vibration effect of the game.
: " "7 If the SIM card you insert has the STK function, the STK menu will display. Select corresponding service option and press to access the function. The function items of this menu depend on your subscription or operators. Please ask your operators for specific. )-( You can use the WAP to browse the WAP sites on your phone. Before using it for the first time, you must set the WAP configuration. % You can store a homepage for each access mode.
" This menu allows you to configure web settings for web browsing. Your phone may be preconfigured with the settings parameter of a particular network operator. If you are a subscriber of the network operator, you may start using your browser. Otherwise, you need to reconfigure the settings. If your network operators modify the WAP settings or the network providers of the content modity the WAP address, it will result in you can’t view the Web, please ask them for the latest information.
; % To access the Options menu To return to previous screen #% To select Effect Setting Your phone is provided with a built-in digital camera. You can take pictures, store them in your phone or transfer them to your PC via cable line, use them as wallpaper or send them to your friends via MMS. - To set White Balance To set Delay Timer To activate / deactivate Cont Shot To set Scene Mode % Press in idle mode or select Camera and press to activate the camera.
/&# To access Album. To set Shutter Sound, Exposure, Banding, Delay Time, Cont.Shot. To set Image Size and Image Quality. 4 2 To select White Balance. Select a photo and press Options to access the following options: 7 To view the picture of full screen. 2 To set the browse style of all pictures. 1 To apply the picture to other options. To set scene mode of screening. 8 Set special effect for the picture. & 1 To add a frame to the picture. Some frames are usable only to some special size.
or To zoom in / out /5 To access Video Player. To increase / decrease exposure compensation 7 To set White Balance, Exposure, Night Mode, Banding. To start / stop recording 7 To set Video Quality. To exit the video recording mode and return to the idle mode. 8 To access the Options menu 6 To return to previous screen To select storage to save the video. # To reset the recorder settings to their default values.
To sort all pictures separately by name, type, time or size. To select storage to save the picture. You can use this player to play music. The music stored in the player folder can be automatically detected and added to the play list. You can dial or answer a call during listening to the music and the player will pause while you are talking. - % % You must set Off in the List Auto Gen option of the music player settings before add. 1. 2. - 1. 2. 3.
+ % ( 5 To play the music. 6 To display the info of the music. & / To set the music as ring tone. + To refresh the play list. Include the source of the music, List Auto Gen, Repeat (Music repeat mode in playing), Shuffle(Playing order), Background Play(Whether to continue playing when you exit from music player) and Equalizer. Only those music tracks saved in the root directory folder of My Music can be autogenerated by selecting the Refresh List option.
deactivate it. If the selective frame skip to next position, press to select the vibra note then press .. % This function is used to edit melody you like and set it as ring tone. If there is no melody, you can press Add to create a new melody. % + % To play the melody. 5 To select playing speed of the melody. To insert a rest. - # To enter Do-Si. To deactivate the activated vibra effect. To change pitch of the note to high, middle or low. To switch the status of the note to high, normal or low.
= # In this menu, you can view the calls you have dialed, received, or missed, and call time and so on. To display the latest unanswered calls. Select a call log and press to access the following options: 7 To view the detail about the selected number. 6 To delete the selected number. ! 5 To edit the selected number and you % can save it to phonebook. $ To display the latest received calls. To delete call logs, including received calls or delete all.
$ To reset the cost counter. 2 To set the maximum cost for your calls. ( To set the cost of one unit; this price per unit is applied when calculating the cost of your calls. Before setting the options of the Reset Cost,Max Cost and Price Per Unit, you need to enter the PIN2 code. ($" To count the amount of data sent and received via GPRS and the unit is Byte. You also can reset the counter. The data of the Call Time, Call Cost, SMS Counter and GPRS Couter is only for reference.
> Chat All 6 " " 2 You can read SMS messages received in this menu. The messages are displayed in a list. When a message is displayed, press to read it, then press Options to access the following options: To delete the selected message. 6 To reply to the sender. 8 To edit the selected message. 1 To edit and forward the selected message. To delete all messages at once. Copy All To copy all messages to another memorizer. ! &ll To move all messages to another memorizer.
# To send message to all of the selected group. 2 (; 1 2. /0 To add picture, animation or sound to the message. To set the /0 <, /0 & and 3 5 . , Select Send Only/Save and Send, then press to enter a number or press to select a contact from your phonebook. When you send message via SMS network, your phone possibly shows "Sent". It shows that the message has been sent to SMS center, which you have set in SIM card, but it does not show that the message has been sent to destination.
% In this menu, the phone predefine up to ten messages that you use frequently when writing a new message. Select a message and press to access the following optons: 8 To edit the selected predefined message. 8 To delete the selected message. & 7 5 To use the selected template to write a new message. % This option is used to display the storage status of the messages saved in SIM card and phone. / " " 6 ! To display the amount of SMS sent and received. You can reset the counter.
5 ( When On, this option can transmit the number of your SMS message centre together with the message. The recipient can reply to you by using your own SMS centre instead of theirs. This speeds up the rate of transmission. This feature depends on your subscription. ) % To compose and send a MMS message, follow the steps detailed below: 1. Select Write Message, enter the following message. To set number or E-mail of the recipient.
( To exit from editing mode. 80 ! To set the sending options. + 2 In this menu, you can read MMS messages received. Select a message, then press to access the following options. 7 5 To view the message, you can press to access option menu and can select Play/Save image As/Save audio As to play or save the multimedia items. 2 This menu is used to save all messages by selecting Save and Send. Select a message, then press to access the following options: 7 To view the message.
5 To view the recipient, subject, date and size. 4 To send the message to others. If the message has not been sent successly, it will show "Resend". 5 To edit the message. 8 To delete the message. 6 6 & , 3# To delete all messages in outbox. To save or dial the number of the sender and the number in the message. If you have not set the recipient for the message in drafts,the " option will not display in option menu. % . To view sender, Cc, subject and size.
1. # This function is used to chat with your contact by SMS. 1. Select a chat room, then press . 2. Select Chat Room Info, enter my nickname and destination number, then press . 3. Select Start New, enter the message and send it to start chatting. % You can send or receive email messages by connecting directly to an email server through an internet service provider(ISP) or a network. Select Write Email, enter the following message. To set the receiver address.
To reply to the sender with the original text. # To reply to the sender without the original text. & To reply to all contacts in the email with original text. & # To reply to all contacts in the email without the original text. 1 To edit and forward the selected email. 6 To delete the selected email. / You can read unsent or failing sent email in the menu. The network of your mailbox may not support sending email from the phone, then it possibly will shows that sending email failed. .
5 To define your email protocol advised by your email server provider. 6 < To set the most download capability. + (# ! To set server’s IP address or computer’s name of sending email. (# 5 To set the port of sending email. 6 3 To set your username. 89 & To input your Email address. , To input your name. 5 To input your password. ! To input your password. 5 To set whether to copy on the email server. ! " # To select whether to activate Auto Signature. # To set an image for signature.
7 6 To listen to voice mail. % The function depends on your subscription. This is a kind of public messages broadcasted to a group of mobile users. Generally speaking, each broadcast channel can transmit a sort of message. Please contact with your network provider to get the channel and information list. $ % This menu is used to set the function of broadcast message. When activating this mode(On), you can receive the broadcast message. Otherwise, you can not receive messages.
" You can use this menu to customise your phone settings and change their default values (time and date, security, etc.). % To set home city, time/date and format. To select your local city. ) / 1 6 To adjust the current time and date. To select their format. To set the time to power on or off your phone automatically. Select an item and press to access the following options. # 5 / To select Enable(the setting is valid) or Disable(the setting is invalid). ( ( To select Power On or Power Off.
- % To update the time in your phone. The function depends on your subscription and network. 5 To select the mode of the phone according to your environment. 3 To hold all functions of the phone. 1 To deactivate all communication function and hold entertainment function. To query which mode to be used while powering on. & To delete all of the predefined menu. To disable or enable the selected one. To set the order for the selected one.
.# To set the backlight of the display screen, and select the length of time how the backlight stays on after last activing the keypad. " % To set whether to display the date and time in idle mode. " # # 23 ) % To set whether to display the owner number in idle mode. " % To set whether to display the operator name in idle mode. 2 To set individualized greeting text displayed when power on. # /0 ! To select whether to tell the correspondent your identity while dialing. To hide your number.
# To divert incoming calls to your voice mailbox or to a number (whether in your phonebook or not). 6! & 7 Will divert all voice calls. 6! 6! 6! To choose in which circumstance you want to divert the incoming calls. , 3 & 2# Will divert all data calls. 6! & 6 & 6! Will cancel all diverting options. You also can select 6 ! to cancel a diverting, select =# # to check the status. # You can restrict outgoing and incoming calls from your phone.
# % % To select whether to activate the function and set the periodic beeping time. ( To deactivate this function. To select your service network.It is an advice that selecting Automatic. To set from 1 to 3000 (seconds) as the beeping time. &# To set from 30 to 60 (seconds) as periodic beeping time. The phone will beep ,when in this time each minute. 5 ! ( 8 " % To set IP number in order to make IP calls. This function depends on your subscription and network.
3 To create a preferred network. 5 To select the priority for the selected. 6 To select the selected one from the list ($" 52 To restrict the outgoing calls to designated phone numbers. PIN2 code supplied by the network provider is required to activate this function. Not all SIM cards have PIN2. If your SIM card do not have PIN2, this menu is unusable. To select the connection mode, including Always and When Needed. 6 " The function depends on your network.
If you cannot enter a correct PUK code within ten tries, the SIM card will be locked forever. 53 It is used to access some special network functions such as charging or fixed dial,etc. The service provider supplies the default value. If you cannot enter a correct PIN2 code within three tries, the SIM card will be locked and you will be asked to enter the PUK2 code. The service provider supplies the PUK2 code.
& - 7 % This menu is used to set three alarm clocks, the operation is below: 1. Select one alarm, then press to edit. 2. Set the status (Off/On), time and alarm type(Once/Everyday/Days), snooze interval and alert type(Vibra and Ring/Ring/Vibration Only), then press to confirm. After select Days, press day in a week. and set status of each / % /6 To view appointed date quickly. Enter the date then press . # Your phone has a built-in calculator that you can use to perform basic calculations.
Only 12 digits(Including decimal point) can be saved for the results and operands. ? Your phone has a built-in E-dictionary that you can consult translation for English word or chinese. 1. In the find interface, press to switch an input method what you need. 2. Enter word or chinese, select word or chinese you want to consult from the list. 3. Press to access the following options: The top of the screen in this menu will show the occupation info of the storage.
6 &1 To set Font Style, Font Size, Scroll By, Auto Scroll, Scrool Speed, Full Screen, Encoding. To delete all files in the folder. % After inserting the memory card, this menu will be displayed. Select Memory Card and press to operate the options as operating Phone. Select Remove and press can remove the memory card and the Memory Card menu won’t be displayed from now on. After inserting the memory card, this menu will be displayed. 2.
% This menu helps you manage all kinds of things in your work or life. You can set the content, detailed time and alarm of the menu. If there is no task in your phone, it is empty. You can press Add to create a new task, then press Done to finish. If you select a task, you can press Options to access the option menu. 7 To view the settings of the selected task. & To add a new task. 8 To edit the selected task. 6 To delete the selected task. 6 To delete all tasks in To Do List.
1. 2. 3. Enter a rate in the Rate field, press . Select Rate Representation(The first line on the screen),. Enter an amount in either the Local field and press to get the conversion value in the or Foreign field. "Rate Representation" option allows you to select the Rate you enter is the ratio of Local to Foreign or Foreign to Local. You can enter decimal point by pressing # Key, when processing units or currency of conversion .
0 # You can manage your contacts and store them on your SIM card or in your phone’s memory (up to 300 names). ' To search a contact in the phonebook. Enter the name that you want to search and press . To add a new contact to the selected phonebook. 1. Select To SIM or To Phone and press . 2. Enter the name and number, then press to confirm. To store the number quickly you can input the number in idle mode, then press to save. # To group the contacts in the phonebook in order to be convenient for users.
" % 8 % To store your own phone number in this menu. We advise that you enter your mobile number as well as any other relevant information. Although all its fields can be empty, the Owner Numbers item can not be deleted. "+"8 % The SOS number is the emergency services number in your local country or area. In most cases, you can call this number even if you have not yet inserted a SIM card or entered your PIN. The function depends on your subscription.
1 ( You can activate the corresponding user profile according to your environment and set some options of the selected mode, too. 1. Select (# ) , then select & ! in option menu. Thus the mode you select is in operation. 2. Select # < in option menu to set the following options. Includes Incoming Call, Alarm, Power On, Flip Open, Flip Close, Message Alert, Key Sound. Allows you to set the volume of Ring Tone and Key Tone to one of the seven levels.
! @ % In idle mode, several symbols can be displayed simultaneously on the screen. If the network symbol isn’t displayed, the network is not currently available. You may be in a bad reception area, moving to a different location may help. - The more bars are shown the better the reception is. 2 - The more bars you see, the more power you have left. - You have a missed call. ) - The headset mode is activated. - Your phone will vibrate when receiving a call. 7 7 ring.
Your cellular mobile phone is a low power radio transmitter and receiver. When it is operating, it sends and receives radio waves. The radio waves carry your voice or data signal to a base station that is connected to the telephone network. The network controls the power at which the phone transmits. • The GSM network controls transmission power (0.01 to 2 watts). • Your phone complies with all relevant safety standards. Your cellular mobile phone is your responsibility.
Before boarding an aircraft and/or when packing the phone in your luggage: the use of mobile phones in an aircraft may be dangerous for the operation of the aircraft, disrupt the mobile phones network and may be illegal. In hospitals, clinics, other health care centres and anywhere else where you may be in the close vicinity of medical equipment. In areas with a potentially explosive atmosphere (e.g. petrol stations and also areas where the air contains dust particles, such as metal powders).
• • • • ! • • • • 5 Treat the phone with care. Any misuse will void the International Guarantee. Do not immerse the phone in any liquid; if your phone is damp, switch it off, remove the battery and let them dry for 24hrs before using them again. To clean the phone, wipe it with a soft cloth. Placing and receiving calls consumes the same amount of battery energy. However, the mobile consumes less energy in idle screen when kept in the same place.
• Ensure that your phone and car kit do not block any air bags or other security devices fitted in your car. The use of an alarm system to operate a vehicle' s light or horn to indicate incoming phone calls is prohibited on public roads in some countries. Check local regulations. 8 9>=A>8 % In case of hot weather or after a prolonged exposure to the sun (e.g. behind a window or a windscreen), the temperature of your phone' s casing might increase, especially when featuring a metallic finish.
The network connection is lost. Either you are in a radio shadow (in a tunnel or between tall buildings) or you are outside the network coverage area. Try from another place, try to reconnect to the network (especially when abroad), or contact your network operator for assistance/information about the network. / / Remove and reinstall the battery. Make sure you plugged the jack of the charger into the correct connector. Then charge the phone until the battery icon has stopped scrolling.
Some features are network # dependent. They are only # available, therefore, if the #C network or your subscription 3(/ supports them. Contact your &+ + (48 6 operator for detailed information on this subject. 4 Press and hold or switch off the phone, check that the SIM card and the battery are installed correctly and switch it on again. ?# D # ?# You might be using a charger that was not intended for your phone. ! Make sure you always use the Philips authentic accessory shipped with your phone.
( Some accessories, such as a battery and a charger are included as standard in the package of your mobile phone. Other accessories might be sold in the commercial package (according to the operator or the retailer), or sold separately. As a consequence, the package content may vary. To maximise the performance of your Philips phone and not to void the warranty, always purchase Philips Authentic Accessories that are specially designed for use with your phone.
" ! $ ! % THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO RADIO WAVES. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy defined by the international standards.
Workmanship During The Limited Warranty Period? .% 1. What Does This Limited Warranty Cover? During the limited warranty period, Philips or its authorized service representative will, at its option either repair or replace, without charge for parts or labour, a materially defective Product with new or refurbished parts or Product and return such repaired or replaced Product to the Consumer in working condition. Philips will retain defective parts, modules or equipment.
b) c) d) e) f) g) h) 5.
OTHER WARRANTY WHETHER EXPRESS OR IMPLIED (WHETHER BY STATUTE, UNDER THE OPERATION OF LAW OR OTHERWISE) AND SPECIALLY DISCLAIMS ANY WARRANTY OF SATISFACTORY QUALITY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PHILIPS’ TOTAL LIABILITY FOR DAMAGES RELATING TO OR ARISING OUT OF THE PURCHASE OR USE OF THE PRODUCT, REGARDLESS OF THE TYPE OR CAUSE OF SUCH DAMAGE OR THE FORM OR CHARACTERISATION OF THE CLAIM ASSERTED (E.G.
% We, Shenzhen Sang Fei Consumer Communications Co., Ltd. 11 Science and Technology Road, Shenzhen Hi-tech Industrial Park, Nanshan District, Shenzhen 518057, China. declare under our sole responsibility that the product CT0298 Cellular Mobile Radio GSM 900/1800 TAC: 35789801 to which this declaration relates, is in conformity with the following Standards: SAFETY: EN 60950-1:2001+A11:2004 HEALTH: EN 50360:2001 EMC: ETSI EN301 489-7 v 1.2.1; ETSI EN 301 489-17 v1.2.1 SPECTRUM: ETSI EN 301 511 v9.0.
