User manual

10 EN
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
Press AUTO VOLUME repeatedly to select
a setting within three seconds on the display
panel:
• ON: Turn on auto volume.
• OFF: Turn off auto volume.
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
available for Dolby encoded DVD and Blu-ray
discs.
Press NIGHT MODE repeatedly to select a
setting within three seconds on the display
panel:
• ON: Turn on night mode.
• OFF: Turn off night mode.
Note
•
If auto volume is set to ON, you cannot enable the
night mode.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press AUDIO SYNC.
2 Within two seconds, press the Navigation
buttons (
/ ) to change the delay
shown on the display panel.
3 Press AUDIO SYNC again to exit.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press SURR. SOUND repeatedly to select a
setting within three seconds on the display
panel:
• AUTO: Surround sound based on the
audio stream.
• STEREO: Two-channel stereo sound. Ideal
for listening to music.
• 360SOUND: Surround sound for best
cinematic experience.
Note
•
If you play a source with DTS, DTS is displayed on the
display panel for two seconds.
• If you play a source with Dolby, DOLBY D is displayed
on the display panel for two seconds.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of your SoundHub.
Press TREBLE +/- or BASS +/- within three
seconds to change the frequency shown on the
display panel.
MP3 player
Connect your MP3 player to play your audio
les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
Play music
1 Connect the MP3 player to the SoundHub
as described in the Quick start guide.
2 Press MUSIC iLINK.
» I-LINK is displayed on the display
panel.
3 Press the buttons on the MP3 player to
select and play audio les or music.