Operation Manual

15
English
EN
3 Select and play audio les or music on
your NFC device.
• To break the connection, tap again the
NFC device with the NFC tag on this
product.
Auto standby
If no audio/video playback is detected from a
connected device for 30 minutes, this product
automatically switches to standby.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1 In OPTICAL mode, press and hold RESET
for ve seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
5 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• Total output power:
210W RMS (+/- 0.5 dB, 30% THD) /
168W RMS (+/- 0.5 dB, 10% THD)
• Frequency response:
20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUDIO-IN: 500 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
• Bluetooth proles: A2DP
• Bluetooth version: 2.1 + EDR
Main unit (left and right base
speakers)
• Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 50 W
• Standby power consumption: ≤ 0.5 W
• Speaker impedance:
• Woofer: 8 ohm
• tweeter: 8 ohm
• Speaker drivers:
2 x 76 mm (3”) woofer +
2 x 25.4 mm (1”) tweeter