Always there to help you Register your product and get support at www.philips.
Contents 1 Important Important safety instructions Care for your product Care of the environment Help and support 2 Your product Main unit Remote control Connectors Wireless subwoofer Wireless box (receiver) 2 2 3 3 4 7 7 8 9 9 10 10 4 Use your product 12 12 12 12 13 13 14 14 14 5 Update software 15 15 15 6 Wall mount 16 7 Product specifications 16 Adjust the volume Choose your sound MP3 player Play music via Bluetooth Connect Bluetooth via NFC USB storage devices Auto standby Apply factory se
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. •• •• Important safety instructions •• •• •• •• •• •• •• •• •• •• •• •• 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• •• •• •• •• •• • If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (for example. liquid filled objects, lighted candles). This apparatus may contain lead and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities.
Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country.
HDMI IN: Switch your source to the HDMI IN connection. : Switch to Bluetooth mode; Press and hold three seconds to break the current Bluetooth connection. HDMI ARC: Switch your source to HDMI ARC connection. Remote control This section includes an overview of the remote control. a c b d c d e l f g Start, pause or resume play in Bluetooth mode (only for AVRCP-supported Bluetooth devices). e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume.
Connectors Wireless subwoofer This section includes an overview of the connectors available on this product. This product comes with a wireless subwoofer. a b a b c d e fg a HDMI IN Connect to the HDMI output on a digital device. b TO TV - HDMI OUT (ARC) Connect to the HDMI (ARC) input on the TV. c FRONT SPEAKER L/R Connect to the front speakers. d USB • Connect to a USB storage device for audio media play. • Upgrade software of this product. e DC IN Connect to the power supply.
Wireless box (receiver) This product comes with a wireless box (receiver) to make the rear speakers work with the main unit wirelessly. a bc d 3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate a AC MAINS Connect to the power supply.
SUB WOOFER L FRONT SPEAKER R FRONT SPEAKER 5 6 Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall. Wireless box (receiver): Place the wireless box in between the rear speakers for easy cable connection.
Pair up with the subwoofer The wireless subwoofer automatically pair up with the main unit for wireless connection when you turn on the main unit, and the subwoofer. If no audio from the wireless subwoofer can be heard, do the following for pairing. 1 2 3 4 What you need • A High Speed HDMI Cable. • Your TV supports both HDMI ARC and HDMI-CEC (see the TV user manual for details). • For some TV models, enable the external speaker output from the TV setting menu (see the TV user manual for details).
• Option 2: Connect to TV through optical cable Best quality audio 2 TV The digital optical output on the external device might be labeled OPTICAL OUT, SPDIF or SPDIF OUT. Press OPTICAL on the remote control of this product to enable the optical connection. Option 2: Connect audio through analog audio cables 1 2 Using an optical cable, connect the OPTICAL connector on this product to the optical output on the TV.
Set up speaker distance Wireless connection causes audio delay latency. Set up the speaker distance to synchronize audio output among the front speakers, rear speakers and subwoofer. 1 3 4 5 6 Repeat step 3 and 4 to set up the volume for other speakers. After the setup is complete, press EXIT SETTINGS to exit. »» The value is saved and applied. Press DELAY to enter setup mode. »» The display panel scrolls DELAY ADJ (delay adjustment).
4 Use your product This section helps you use this product to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch this product to the correct source for other devices. Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 Press TREBLE +/- or BASS +/- to change the frequency.
3 Press the buttons on the MP3 player to select and play audio files or music. • On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume. Play music via Bluetooth Through Bluetooth, connect your product with a Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through the speakers of this product.
3 Select and play audio files or music on your NFC device. • To break the connection, tap again the NFC device onto the NFC tag on this product. Note •• If a USB storage device has a large media library, it takes some time to load those contents. •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB USB storage devices Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.
5 Update software 5 To get the best features and support, update your product with the latest software. Check software version In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence within three seconds. »» The software version number is displayed on the display panel. Update software via USB 6 7 On the remote control, within 6 seconds press twice then Volume + once, and then hold down SOUND. »» Then “UPG” (upgrade) blinks on the display panel.
6 Wall mount Before you mount this product on the wall, read all safety precautions. 7 Product specifications Note Note •• Specifications and design are subject to change without notice. •• Before wall mounting, make sure the wall can support the weight of this product. •• For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Improper wall mounting may result in accident, injury or damage.
Bluetooth Wireless box/receiver •• •• • •• •• •• Bluetooth profiles: A2DP Bluetooth version: 4.1 Main unit •• •• •• •• •• Power supply: • Model (Philips branded AC power adapter): DYS602-210309W; AS650-210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.09A Standby power consumption: ≤ 0.5 W Dimensions (W x H x D): 580 x 51.5 x 98 mm Weight:1.2 kg Built-in speakers • 2 x midrange (90mm/3.5" x 34mm/1.3", 8 ohm) • 1 x tweeter (25.
8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on this product do not work. • Disconnect this product from the power supply for a few minutes, then reconnect.
• • Make sure that NFC is enabled on the device (see the device' s user manual for details). For pairing, tap the NFC device on the NFC tag of this product. 9 Notice This section contains the legal and trademark notices. Notice of compliance The device complies with the FCC rules, Part 15.
FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
P&F USA, Inc.
Specifications are subject to change without notice 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. CSS5530B_37_UM_V3.
