Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 3 4 2 Your product 4 4 5 6 6 Help and support Safety Mains fuse Care for your product Care of the environment Compliance Main unit Remote control Connectors Wireless subwoofer 8 Troubleshooting 16 3 Connect and set up 7 Place speakers 7 Pair up with the subwoofer 7 Connect to TV 8 Connect digital devices through HDMI 8 Connect audio from TV and other devices 8 Set up speakers 9 4 Use your product 10 10 10 11 11 12 12 13 13 5 Update software 13 13 13 6 Wall mount
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
2 Your product This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
: Switch to Bluetooth mode; Press and hold three seconds to break the current Bluetooth connection. HDMI ARC: Switch your source to HDMI ARC connection. Remote control This section includes an overview of the remote control. c a d b c d / Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices). • • e l Press to start, pause or resume play in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices).
Connectors Wireless subwoofer This section includes an overview of the connectors available on this product. This product comes with a wireless subwoofer. a b a b c d e fg a HDMI IN Connect to the HDMI output on a digital device. b TO TV - HDMI OUT (ARC) Connect to the HDMI (ARC) input on the TV. c FRONT SPEAKER L/R Connect to the front speakers. d SERVICE (USB) • Connect to a USB storage device for audio media play. • Upgrade software of this product. e DC IN Connect to the power supply.
3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note •• Surround sound depends on factors such as room shape and size, type of wall and ceiling, windows and reflective surfaces, and speaker acoustics. Experiment with the speaker positions to find the optimum setting for you. Follow these general guidelines for speakers placement.
3 4 In OPTICAL mode (press OPTICAL) , within six seconds, on the remote control, press twice then Volume + once, and then hold down BASS +. »» If the pairing succeeds, the white LED on the subwoofer lights up. Note •• If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through this product. •• If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV. However, some of the features may not be available.
Note •• When this product and TV are connected through HDMI ARC, an audio connection is not required. Option 1: Connect audio through a digital optical cable Best quality audio Set up speakers Set up the speakers manually to experience customized surround sound. Before you start Make the necessary connections described in the quick start guide. Set up speaker distance TV Wireless connection causes audio delay latency.
2 3 4 5 6 Press VOL again to play test tone from the speakers. Then press VOL to select a speaker for volume adjustment. Press Volume +/- to adjust volume for the selected speaker. • To exit setup mode without save, press EXIT SETTINGS, or 3 seconds of button inactivity occurs. Repeat step 3 and 4 to set up the volume for other speakers. After the setup is complete, press EXIT SETTINGS to exit. »» The value is saved and applied.
Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 Press TREBLE +/- or BASS +/- to change the frequency. 1 2 3 Synchronize video and sound If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC +/- to synchronize the audio with the video. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.
2 3 Press AUDIO IN. Press the buttons on the MP3 player to select and play audio files or music. • On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume. Play music via Bluetooth Through Bluetooth, connect your product with a Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through the speakers of this product.
3 Select and play audio files or music on your NFC device. • To break the connection, tap again the NFC device onto the NFC tag on this product. Auto standby When playing media from a connected device, this product automatically switches to standby after 15 minutes of button inactivity and no audio/video play from a connected device. Apply factory settings You can reset this product to the default settings programmed at the factory.
5 6 7 On the remote control, within 6 seconds press twice then Volume + once, and then hold down SOUND until upgrade information appears on the TV screen. »» Then “UPG” (upgrade) blinks on the display panel. »» If a USB flash drive is not connected or invalid upgrade file is found, “ERROR” (error) is displayed on the display panel. Press on the remote control to start the upgrade. Wait until the upgrade is completed. »» If the upgrade is complete, this product automatically turns off and on again.
7 Product specifications Main unit •• Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 340W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 500 mV • AUDIO IN: 200 mV •• •• •• •• Built-in speakers • 2 x midrange (90mm/3.5" x 34mm/1.3", 8 ohm) • 1 x tweeter (25.
Standby power management • • • • When the product remains inactive for 15 minutes, it automatically switches to standby or networked standby. The power consumption in standby or networked standby is less than 0.5W. To deactivate Bluetooth connection, press and hold the Bluetooth button on the remote control. To activate Bluetooth connection, enable Bluetooth connection on your Bluetooth device, or enable Bluetooth connection via the NFC tag (if available).
Bluetooth A device cannot connect with this product. • The device does not support the compatible profiles required for this product. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly (see 'Play music via Bluetooth' on page 12). • This product is already connected with another Bluetooth device. Disconnect the connected device, then try again.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
Specifications are subject to change without notice 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under licens. CSS5330B/CSS5330G_12_UM_V2.
