Operation Manual

16 EN
6 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• Total output power:
200W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• AUX Input sensitivity:
• 400mV +/- 100mV (connection to an
external device with 3.5mm jack)
• 800mV +/- 100mV (connection to an
external device with red and white
audio jacks)
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
• Bluetooth proles: A2DP
• Bluetooth version: 4.1
Main unit (left and right base speakers)
• Power supply:
• Model (Philips branded AC power
adapter): DYS602-210309W;
AS650-210-AA309
• Input: 100-240 V~, 50/60 Hz 1.5 A
• Output: 21V , 3.09A
• Standby power consumption: ≤ 0.5 W
• Dimensions (W x H x D):
128 x 221 x 128 mm
• Weight
• Left base speaker: 1.11 kg
• Right base speaker: 1.29 kg
• Built-in speakers
• 2 x woofer (76.2mm/3", 8 ohm)
• 2 x tweeter (25.4mm/1", 8 ohm)
Surround speakers
• Speaker impedance: 8 ohm
• Speaker drivers: 2 x 63.5 mm (2.5") full
range
• Dimensions (W x H x D):
120 x 117 x 120 mm
• Weight: 0.66 kg/each
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 35 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 3 ohm
• Speaker drivers:
1 x 133 mm (5.25") woofer
• Dimensions (W x H x D):
226 x 251 x 306 mm
• Weight: 4.0 kg
Remote control batteries
• 1 x AAA-R03-1.5 V
Standby power management
• When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
• The power consumption in standby or
networked standby is less than 0.5W.
• To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
• To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).