Always there to help you Register your product and get support at www.philips.
CSS5235Y_93_UM_V1.0.
1 Important Safety Care for your product Care of the environment Help and support 2 2 Your product Main unit Remote control Connectors Wireless speakers Wireless subwoofer 4 3 Connect and set up Connect the main unit Charge speakers Pair up with speakers/subwoofer Place speakers Connect to TV Connect audio from TV and other devices 8 2 3 3 3 6 Product specifications 17 7 Troubleshooting 18 4 5 6 6 7 8 8 8 9 10 11 4 Use your product Adjust the volume Choose your sound Play music via Bluetooth Pl
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your product Blinks three times when DTS audio is input. • Blinks continuously when no audio from the selected HDMI ARC source is detected, or when an unsupported audio format is detected. Blue LED • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. • Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. • Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.
This section includes an overview of the remote control. a c b d c d e j / Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices). Englis h USB: Switch to USB mode. Bluetooth: Switch to Bluetooth mode; Press and hold three seconds to break the current Bluetooth connection. HDMI ARC: Switch your source to HDMI ARC connection. Remote control Start, pause or resume play in USB mode and Bluetooth mode ( only for AVRCP-supported Bluetooth devices).
h TO TV - HDMI OUT (ARC) Connectors This section includes an overview of the connectors available on this product. Connect to the HDMI (ARC) input on the TV. Wireless speakers This product comes with a pair of wireless surround speakers. a b cd ef gh a TO R SPEAKER Connect to the right base speaker. b DC IN Connect to the power supply. c TO L SPEAKER Connect to the left base speaker. d COAXIAL Connect to a coaxial audio output on the TV or a digital device.
b • • Switch the surround speaker on. The surround speaker automatically turns off after 4 minutes of being wirelessly disconnected from the main unit. During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly. • When the pairing succeeds, the indicator lights up white. • When the pairing fails, the indicator blinks white slowly. • When wireless connection is disconnected for 4 minutes, the indicator turns off.
3 Connect and set up • Blink red: near empty, less than 10% remaining 1 Dock the left and right wireless speakers onto the main unit (the left and right base speakers) to charge the speakers. Turn on the main unit. »»During charging, the orange LED on the wireless speaker lights up. »»When fully charged, the orange LED on the wireless speaker turns off. This section helps you connect this product to a TV and other devices, and then set it up.
1 2 3 Turn on the main unit and the surround wireless speakers. »»If the connection to the main unit is lost, the red and orange LEDs on the wireless speaker blink alternatively. Dock the left and right wireless speakers onto the main unit (the left and right base speakers) to pair up automatically. »»If the pairing is successful, the orange LED on the wireless speaker lights up for five seconds. »»If the pairing fails, the red and orange LEDs on the wireless speaker blinks alternatively.
Follow these general guidelines for speakers placement. 1 Seating position: This is the center of your listening area. 2 Place the main unit (left and right base speakers) in front of the seating position. 3 L/ R surround speakers (left/right): Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. 4 SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV.
Play audio from TV or other devices through the speakers of this product. Use the best quality connection available on this product, TV, and other devices. Option 2: Connect audio through a digital coaxial cable Best quality audio Englis h Connect audio from TV and other devices Note •• When this product and TV are connected through HDMI ARC, an audio connection is not required.
4 Use your product • Press VOICE to create sound effect which makes human voice more clear and outstanding for listening. Equalizer This section helps you use this product to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch this product to the correct source for other devices. Adjust the volume Change the high frequency (treble) and low frequency (bass) settings of this product.
What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 4.1. • The operational range between the main unit (left and right speakers) and a Bluetooth device is approximately 10 meters (30 feet). 1 Press Bluetooth on the remote control to switch this product to Bluetooth mode. »»The blue LED on the right base speaker blinks.
1 2 3 Enable NFC on the Bluetooth device (see the device' s user manual for details). Tap the NFC device on the NFC tag of this product until you hear a beep sound from this product. »»The blue LED on the right base speaker lights up, and the NFC device is connected to this product via Bluetooth. »»If the connection fails, the blue LED on the right base speaker blinks continually. Select and play audio files or music on your NFC device.
•• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). •• If a USB storage device has a large media library, it takes some time to load those contents. •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP and MTP protocols are not supported.
a Unzip the download if zipped, and make sure that the unzipped file contains the following two files. "CSS5235.bin" (for the software of the main unit) "MCU5235.bin" (for the software of the surround speakers) Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player. b Put the "CSS5235.bin" and "MCU5235.bin" in the root directory of the USB device.
Main unit (left and right base speakers) •• Note •• Specifications and design are subject to change without notice. •• •• Amplifier • • • • Total output power: 200W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) AUX Input sensitivity: • 400mV +/- 100mV (connection to an external device with 3.
Standby power management • • • • When the product remains inactive for 15 minutes, it automatically switches to standby or networked standby. The power consumption in standby or networked standby is less than 0.5W. To deactivate Bluetooth connection, press and hold the Bluetooth button on the remote control. To activate Bluetooth connection, enable Bluetooth connection on your Bluetooth device, or enable Bluetooth connection via the NFC tag (if available).
Dock the wireless surround speakers into the main unit to charge the battery. No sound from the wireless subwoofer. • Wirelessly connect the subwoofer to the main unit. Distorted sound or echo. • If you play audio from the TV through this product, make sure that the TV is muted. Audio and video are not synchronized. • Press AUDIO SYNC +/- to synchronize the audio with the video. Bluetooth A device cannot connect with this product.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
产品中有害物质的名称及含量 Names and Contents of Hazardous Substances 有害物质 Hazardous Substance 部件名称 Name of the parts Housing 外壳 Subwoofer 超重低音箱 Loudspeakers 喇叭单元 PWBs 电路板组件 Accessories (Remote control & cables) 附件（遥控器， 电源线，连接线） Batteries in Remote Control (ZnC) (Pb) 铅 (Hg) 汞 (Cd) 镉 (Cr (VI)) 六价铬 多溴联苯 多溴二苯醚 O O O O O O X O O O O O O O O O O O X O O O O O X O O O O O X O O O O O (PBB) (PBDE) 遥控器电池 本表格依据 SJ/T 11364 的规定编制。 The table is formulated according to SJ/
Specifications are subject to change without notice 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of WOOX Innovations (Shanghai) Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. CSS5235Y_93_UM_V1.
