User manual

12
8 Product
specifications
Note
•
Specications and design are subject to change
without notice.
Amplier
• Total output power:
• Europe/Asia Pacic/China/Russia/India:
60W RMS (30% THD)
• Latin America: 48W RMS (10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 600 mV
• Music iLink: 250 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Main unit
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 20 W
• Standby power consumption: ≤ 0.5 W
• Speaker impedance: 4 ohm woofer, 4 ohm
tweeter
• Speaker drivers: 25 x 120 mm (1 x 5”)
woofer, 38 mm (1.5”) tweeter
• Frequency response: 150 Hz-20 kHz
• Dimensions (WxHxD): 708 x 47 x 65 mm
• Weight: 1.03 kg
7 Wall mount
Before you mount your SoundBar to the wall, read
all safety precautions (see ‘Safety’ on page 5).
If you have any query, contact Philips Consumer
Care in your country.
Screw length/diameter
Depend on the type of wall mounting this
SoundBar, make sure that you use screws of a
suitable length and diameter.
For information about how to wall your SoundBar,
see the Quick start guide.
> 25mm
3 - 3.5mm
EN