User manual

11
English
MP3 player
Connect your MP3 player to play your audio les
or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
Play music
1 Connect the MP3 player to the SoundBar as
described in the Quick start guide.
2 Press MUSIC iLINK.
» MUSIC iLINK indicator on the front
panel ights up.
3 Press the buttons on the MP3 player to
select and play audio les or music.
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
Within three seconds, press TREBLE+, VOL-, and
BASS+.
» When the restore factory settings
process is complete, the standby
indicator blinks ve times. Your SoundBar
automatically switches off and back on
again.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Change treble or bass
Change the high frequency (treble) or low
frequency (bass) settings of the SoundBar to suit
your video or music.
Press TREBLE +/- or BASS +/- to increase or
decrease treble or bass.
• The Source indicators on the front panel
blink twice when the treble or bass is set to
either minimum or maximum.
Change virtual surround mode
Cirrus virtual technology (CVT)) creates a highly
compelling 5.1-channel listening experience from
as few as two speakers.
Press SURROUND repeatedly to switch CVT
mode on or off.
• On: AUX indicator on the front panel
blinks twice.
• Off: MUSIC iLINK indicator on the front
panel blinks twice.
EN