Quick Start Manual

ManualsBrandsPhilips ManualsTelevisionsPhilips CRD01/00

Easy Advertiser

Quick Start Guide

Summary of content (16 pages)

PAGE 1
Easy Advertiser Quick Start Guide
PAGE 2
PAGE 3
Easy Advertiser (CRD01/00) English CHECK THE PACKAGE CONTENTS The product package includes the following: Description Easy Advertiser SmartCard Quantity 1 USB Thumbdrive 1GB 1 HDMI cable 1 Easy Advertiser card cap 1 Power Supply Adapter (100-240V / 50-60 Hz) 1 Power Supply cable for UK 1 Power Supply cable for EU Continental 1 Mechanical bracket for Power Supply Adapter 1 Purse Lock (for cable management) 1 Screws 2 Pan M4x6 Torx 2 Pan M4x10 Torx 2 Pan M4x10 CrossHead Easy Advertiser P
PAGE 4
English Easy Advertiser (CRD01/00) MECHANICAL INSTALLATION 1. 2. 3. 4. 5. 6. This card is sensitive to static electricity. Please don't touch the components while installing. Before removing the device from its bubble wrap it is advised to work in an antistatic environment. Alternatively touch a grounded metal like a water or heating pipe for central heating to discharge any static electricity. Open package and remove contents. Remove the Easy Advertiser SmartCard from the air bubble wrap.
PAGE 5
Easy Advertiser (CRD01/00) d. 7. English Replace the original Easy Advertiser SmartCard slot cap with the new SmartCard cap included in the package. Slide the cover over the Easy Advertiser SmartCard and screw it into place. Use the screws removed earlier. NOTE: (Plugging in or removing the USB device without screwing on the card cap may result in the card being pulled out of the Monitor and potentially damage the unit) Connect the cables: a.
PAGE 6
English 8. Easy Advertiser (CRD01/00) Mounting the Power Supply bracket a. Mount the Power Supply bracket as illustrated with the provided screws (2 Pan M4x10 CrossHead / Torx). b. 9. Place the Power Supply Adapter into the bracket as shown. Switching On: a. Plug in the mains cord and switch on the Monitor. b. c. Page 4 A cold start (power on) of Easy Advertiser SmartCard may take some time, please wait.
PAGE 7
Easy Advertiser (CRD01/00) English MANDATORY MONITOR SETTINGS 1. Set SMARTPORT Communication to SP-SPI by the following steps: a. b. c. d. e. 2. Set ESP Power Settings to OFF by the following steps: a. b. c. d. 3. Press MENU DISPLAY button on the Remote Control Select CONFIGURATION Select CONTROL Change ESP configuration value to OFF Set PIXEL SHIFT feature to NO by the following steps: a. b. c. d. 4.
PAGE 8
English 5. Easy Advertiser (CRD01/00) Set SWITCH ON SOURCE by the following steps: a. b. c. d. Page 6 Press MENU DISPLAY button on the Remote Control Select CONFIGURATION Select SWITCH ON / OSD Change SWITCH ON SOURCE setting to HDMI1.
PAGE 9
Easy Advertiser (CRD01/00) English EASY ADVERTISER VIRGIN INSTALLATION SELECT LANGUAGE     Select from English, French, German, Italian and Spanish. Use navigation keys to highlight the different languages. Highlight the language of your choice. Press OK to confirm.   Select either the 12 hour or 24 hour format. Press up/down navigation keys to highlight your choice.    The hour box will be highlighted. Press up/down navigation keys to change the hour.
PAGE 10
English Easy Advertiser (CRD01/00) EASY ADVERTISER PUBLISHER INSTALLATION Important: Please ensure that you are using Microsoft Windows XP with Service Pack 2/3 and .Net Framework Version 2.0 installed.              Page 8 Insert the CDROM into your personal computer.  Refer to next section for .NET Framework Version 2.0 installation. Select your desired language to begin installation. You are also recommended to close all other applications before continuing.
PAGE 11
Easy Advertiser (CRD01/00) English GETTING STARTED ON PC INSTALLATION WITH THE CDROM PC SYSTEM VERIFICATION 1. Check system properties of the PC: a. Select START at the bottom left corner of your screen, and select CONTROL PANEL. b. Select SYSTEM to open the System Properties window, and select General tab. c. On the General tab, the System of your PC indicated should be Microsoft Windows XP, Service Pack 2/3. See above example. d. Select OK or Cancel to exit this System Properties window.
PAGE 12
English 2. Page 10 Easy Advertiser (CRD01/00) Check if there is pre-installed .NET Framework Version 2.0: a. Select START at the bottom left corner of PC screen, and select CONTROL PANEL. b. Select Add or Remove Programs. See above example. c. In the list of currently installed programs, scroll down to check if this .NET Framework Version 2.0 is already in the list. d. If it is not available, refer to the next page for download and installation of this required software.
PAGE 13
Easy Advertiser (CRD01/00) English .NET FRAMEWORK VERSION 2.0 DOWNLOAD AND INSTALL 3. Download and install .NET Framework Version 2.0: a. .NET Framework software can be downloaded from the Microsoft downloads website, see above example: http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDDAAB15C5E04F5&displaylang=en b. c. d. Alternatively, a search engine like Google can also be used to search for this software download.
PAGE 14
English Easy Advertiser (CRD01/00) VERIFYING MONITOR SET UP CORRECTLY    Page 12 The simplest way to verify that the Easy Advertiser SmartCard is properly set up on the Monitor is to plug in the packaged USB Thumbdrive as shown. Easy Advertiser should then playback the Philips Product Information content on your Monitor continuously.
PAGE 15