Datasheet

ManualsBrandsPhilips Manualscomputer componentsCPWNA100/00

Table Of Contents

Chapter 1 - Introduction of the Wireless Notebook Adapter 11a/g
Chapter 2 - Important information
Chapter 3 - Installing the Wireless Notebook Adapter 11a/g
- 3.1 - Decide in what way you want the Wireless Notebook Adapter 11a/g to connect to other wireless network devices. Your options are:
  - Infrastructure wireless network
  - d Hoc wireless network
- 3.2 - Use the 'How to...?" booklet to help you through the installation procedure.
Chapter 4 - Checking and changing settings: CPWNA Monitor
- 4.1 - How to access the settings
- 4.2 - What do the settings mean
Chapter 5 - General network and security related information
- The DOs and DON'Ts of securing your wireless network
- Securing your network from Internet access
Chapter 6 - Example of how to secure your wireless network
Chapter 7 - Example of use: how to set-up a computer network?
- Which Windows version do you have installed
  - For Windows XP and Windows 2000
  - For Windows 98SE and Windows Me
Chapter 8 - Network terminology
Chapter 9 - Technical specifications
Chapter 10 - Troubleshooting

• Link information

The Link information tab displays information on the wireless network

name (Network Name) to which there is a wireless connection, the signal

strength and link quality, the connection speed, the channel and the number

of transmitted/received (Tx/Rx) fragments.

• IP information

The IP information tab displays information on the Host Name, IP

Address, Subnet Mask, and Gateway.

This window also contains buttons for releasing and renewing the IP address.

This is done to bring a computer back onto the network after moving it to

a different location, or after experiencing an unexpected outage. First

release, then renew the IP address. Computers on DHCP networks often

(but not always) re-establish network connectivity automatically.

ENGLISH 19