Specifications
Mechanical Instructions
GB 20 EM3E4.
4. Mechanical Instructions
Note: Figures below can deviate slightly from the actual
situation, due to the different set executions.
4.1 Access to the Service Connector (for
ComPair)
1. Remove the 'Service Connector' cover (see Figure 4.1).
2. Connect the ComPair cable (for more info, see chapter
5).
3. Start ComPair and perform the diagnosis.
4.2 Rear Cover Removal
1. Remove all fixation screws [A] of the rear cover.
2. Use a knife (or other thin blade) to release the four
fixation clamps [B] at the top of the TV-set. Press down
until you here a click.
3. Now remove the rear cover.
Figure 4-1 .eps
4.3 Print Removal
4.3.1 Large Signal Panel (LSP)
Service position 1: For better accessibility of the LSP, do the
following(seeFigure4.2):
1. Remove the LSP-bracket from the bottom tray by pulling
it backwards.
2. Hook the bracket in the first row of fixation holes of the
bottom tray. In other words, reposition the bracket from
[1] to [2].
Figure 4-2 .eps
Service position 2: To get access to the bottom side (solder
side) of the LSP, do the following (see Figure 4.3):
1. To disconnect the degaussing coil from the LSP, remove
the cable from connector 1502 [1].
2. Release the wiring from their fixation clamps, in order to
get room for repositioning the LSP.
3. Flip the LSP 90 degrees clockwise [2], and place it in the
fixation hole at the left side of the bottom tray [3].
Figure 4-3 .eps
4.3.2 3rd SCART Panel
To remove the 3rd SCART module, do the following:
1. Remove the fixation screw [1].
2. To release the fixation peg, push it towards the CRT [2].
3. At the same time, pull the complete module away from
the LSP [3]. It hinges in the LSP-bracket.
4. To remove the panel, disconnect the flat-cable from
connector 1680 and remove the four panel screws [4].
Figure 4-4 .eps
CL16532044_005.eps
090501
A
A
A A
service
connector
cover
A
A
A
B B B B
AUDIO OUT
SURR.
L
R
A
A
A
CL 16532044_003.eps
100501
Bottom tray
2
1
1
LSP
LOT - bracket
SSB
SSB - bracket
2
CL 16532044_006.eps
140501
3
4
1
1502
2
CL 16532044_010.eps
140501
1
3
4
4
1680
2