Register your product and get support at Registre su producto y obtenga asistencia en Cadastre seu produto e obtenha suporte em www.philips.
Contents 1 Important 4 4 4 2 Your car audio system 6 6 6 7 3 Before use 9 9 4 Get started 12 12 12 12 13 5 Listen to radio 13 13 14 14 Safety Notice Introduction What's in the box Overview of the system Install the car audio system Turn on Change system settings Set the clock Select a source Tune to a radio station Store radio stations in memory Tune to a preset station 6 Use Bluetooth devices Pair a device Play audio from a Bluetooth device Make a call 7 Play from a USB storage device Cont
1 Important • • Safety Read and understand all instructions before you use the device. If damage is caused by failure to follow instructions, the warranty does not apply. • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To reduce the risk of traffic accidents, do not pick up or make a phone call, nor watch video when driving.
Other trademarks and trade names are those of their respective owners. English negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this system, you can: • enjoy audio from USB storage devices, iPhone, iPod touch, and other external devices, • listen to radio stations, • charge your iPhone or iPod touch, and • make phone calls.
u t sr English Overview of the system q p on a b c d ef jk ghi a b c • • Press to answer or redial a call. Press to hang up a call. • • • Tune to a radio station. Press to skip to the previous track. Press and hold to rewind a track. • Press to enable or disable the full sound. Press and hold to access the sound setting menu. • d e • • Press repeatedly to select a source. Press and hold to activate the selection of listening zones.
i • • • j • • k • • • In radio mode, press to select the preset radio station of No. 4. In radio mode, press and hold to store the current radio station at channel No. 4. For tracks, press to start playing all tracks in the current album or folder randomly. In radio mode, press to select the preset radio station of No. 5. In radio mode, press and hold to store the current radio station at channel No. 5. In radio mode, press to select the preset radio station of No. 6.
Connect wires Caution •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model number and serial number of your car audio system. The model number and serial number are on its bottom. Write the numbers here: Model No.: __________________________ Serial No.: ___________________________ Install the car audio system Caution •• Make sure that all loose leads are insulated with electrical tape.
Connector 4 5 6 7 8 2 Connect to Red wire The +12V power terminal which is live in the accessory (ACC) position of the ignition switch. If there is no accessory position, connect to the +12V car battery terminal that is always live. Make sure that the black ground (earth) lead is connected to a metal surface of the car first.
1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory. • If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other. Make sure that car dashboard opening is within these measurements: 18 3m 53.
6 Attach the trim plate. 4 Get started Turn on Press . »» [WELCOME] scrolls. 7 • Reconnect the negative terminal of the car battery. To turn off the system, press and hold until [GOODBYE] is displayed. Change system settings 1 2 3 Press and hold menu. to access the system Press repeatedly to select an option. • [STORE >] • [AREA] • [LOCAL] • [CLOCK] • [CLOCK 12H] • [BEEP] • [BKO] • [DIMMER] • [DEMO] Rotate to select a setting. • To exit the setting, press .
1 2 3 Press and hold menu. 5 Listen to radio English Set the clock format to access the system Press repeatedly until [CLOCK 12H]or [CLOCK 24H] is displayed. Rotate to select a setting. • [CLOCK 12H]: 12-hour time format • [CLOCK 24H]: 24-hour time format Display the clock Press to display the clock. • To exit, press any button. Tune to a radio station 1 2 3 4 Select a source switches the source to [RADIO] automatically. Press repeatedly to select a source.
Select a tuner sensitivity Store stations manually To receive stations with strong signals only or more radio stations, you can change the tuner sensitivity. 1 2 1 2 3 Press and hold menu. to access the system Press repeatedly until [LOCAL] is displayed. Rotate to select a setting. • [LOCAL ON] (local on): Search stations with strong signals only. • [LOCAL OFF] (local off): Search stations with strong and weak signals.
With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Pair a device Note •• Philips does not guarantee compatibility with all Bluetooth devices. •• Before pairing a device with this system, read its user Tip •• You can also control the play on the Bluetooth device. English 6 Use Bluetooth devices Make a call Note •• Keep the Bluetooth connection active between the system and your mobile. Call a number On your mobile, call a number.
7 Play from a USB storage device This system can play .mp3 and .wma files that are copied onto a supported USB storage device. Control play During play, follow the instructions below to control play. Buttons Pause or resume play. / Note •• Philips does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file system is not supported. RESET 1 2 Connect the USB storage device to the socket. Press repeatedly until [USB] is displayed.
You can use the system to amplify the audio input from an external device, for example, MP3 player. 1 2 3 Press repeatedly to switch the source to [MP3-LINK]. Connect the MP3 link cable to • the MP3-LINK socket on the system, and • the audio output socket (usually the headphone socket) on the external device. 9 Use the dock An application CarStudio is available in the iTunes App Store for this car audio system. To enjoy full features, download the application to your iPhone or iPod touch.
2 Pull out the dock bracket until you hear a "click". Load your iPhone or iPod touch Note K CLIC •• Before you load your iPhone or iPod touch, make sure that the dock bracket is in portrait position. 1 3 4 18 Flip the dock bracket upwards. Press and hold RELEASE to loosen the hooks. EN 2 Connect your iPhone or iPod touch to the dock with its screen facing you. »» The system switches the source to [iPHONE] automatically. If not, press repeatedly to switch the source.
Caution Switch to portrait mode 1 English Adjust the dock bracket Turn the dock bracket clockwise by 90 degrees. •• When the dock bracket is in portrait position, do not turn it clockwise. •• When the dock bracket is in landscape position, do not turn it anti-clockwise. Switch to landscape mode Note •• Before you turn the dock bracket anti-clockwise, make sure that you can see the indication line on its left side. If not, pull the dock bracket outwards. 1 2 Adjust the viewing angle.
Enjoy audio through the dock If the CarStudio application is not installed on your iPhone or iPod touch, follow the steps below. 1 2 3 Turn on the car audio system. Switch the source to [iPHONE]. Play an audio file or radio station on your iPhone or iPod touch. Use the CarStudio application Note •• To enjoy the latest features, update the application on your iPhone or iPod touch when an update message prompts.
Pull out your iPhone or iPod touch. 2 Push the dock panel inwards until you hear a "click". CLICK 3 Tip Flip up the cover. •• For the safety of your property, undock your iPhone or iPod touch before leaving your car. Store the dock bracket Note •• Before storage, make sure that you have unloaded your iPhone or iPod touch and pinched the hooks. 1 Flip the dock bracket downwards until you hear a "click". »» You can see the indication line on top of the dock panel.
10 Adjust sound The following operations are applicable to all supported media. Select a listening zone 1 Adjust the volume level Rotate clockwise or anti-clockwise. Mute sound Press . • To restore sound, press 2 Press and hold until one of the following settings is displayed. • [ALL]: For all passengers • [FRONT-L]: For the front-left seat only • [FRONT-R]: For the front-right seat only • [FRONT]: For front passengers only Rotate to select a setting. Enable the full-range sound again.
1 2 3 Press and hold displayed. until [SUBW] is Press repeatedly to select a setting. • [SUBW]: Enable or mute the subwoofer • [BALANCE]: Balance of sound from left and right speakers (12L to 12R) • [FADER]: Fade of sound from front and rear speakers (12R to 12F) • [BASS]: Bass level (-7 to +7) • [TREBLE]: Treble level (-7 to +7) 11 Adjust system settings 1 2 3 Press and hold menu. English Other sound settings to access the system Press repeatedly until one of the following settings is displayed.
12 Additional information SUB-W L R REAR LINE OUT Reset the system You can reset the system to factory default settings. Note •• If the fuse gets damaged immediately after it is replaced, there may be an internal malfunction. In such case, consult your Philips retailer. 1 2 Open the cover for the USB socket, MP3LINK socket, and RESET button. Press the RESET button with the tip of a ball-point pen or toothpick. »» The system is turned off, and all settings are reset to factory default.
Note •• Product information is subject to change without prior notice. Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11V - 16V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.5 V 500 mV 188 x 58 x 199.5 mm 1.32 kg Radio Frequency range - FM Frequency range AM(MW) Usable sensitivity - FM Usable sensitivity AM(MW) (S/N = 20 dB) 87.5-108.
14 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/welcome). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. General No power or no sound.
15 Glossary English The paired mobile phone connects and disconnects constantly. •• The Bluetooth reception is poor. Move the mobile phone closer to the car audio system or remove any obstacle between the mobile phone and the system. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the system. •• For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature.
SISTEMA DE AUDIO PARA AUTOMOVIL MODELO: CMD310/55 Alimentación: 12Vcc 15A Tierra negativo Philips Electronics Hong Kong Ltda Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. CMD310_55_UM_V3.
