Always there to help you Register your product and get support at www.philips.
Contents 9 Use the dock 18 18 18 18 19 20 20 20 20 20 21 10 Adjust sound 12 12 12 12 12 13 13 22 22 22 22 22 22 22 22 22 11 Adjust system settings 23 12 Additional information 15 15 15 15 24 24 24 13 Product information 25 14 Troubleshooting 26 26 26 15 Glossary 27 1 Important 3 3 3 2 Your car audio system 5 5 5 6 3 Before use 8 8 4 Get started 11 11 11 11 11 5 Listen to radio Safety Notice Introduction What's in the box Overview of t
1 Important • • Safety Read and understand all instructions before you use the device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To reduce the risk of traffic accidents, do not pick up or make a phone call, nor watch video when driving.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this system, you can: • enjoy audio from USB storage devices, iPhone, iPod touch, and other external devices, • listen to radio stations, • charge your iPhone or iPod touch, and • make phone calls.
Overview of the system u t sr q p on a b c d ef jk ghi a b c • • e f • • • • • Tune to a radio station. Press to skip to the previous track. Press and hold to rewind a track. • Press to enable or disable the full sound. Press and hold to access the sound setting menu. • d Press to answer or redial a call. Press to hang up a call. l • • Press repeatedly to select a source. Press and hold to activate the selection of listening zones.
i • • • j • • k • • • In radio mode, press to select the preset radio station of No. 4. In radio mode, press and hold to store the current radio station at channel No. 4. For tracks, press to start playing all tracks in the current album or folder randomly. In radio mode, press to select the preset radio station of No. 5. In radio mode, press and hold to store the current radio station at channel No. 5. In radio mode, press to select the preset radio station of No. 6.
3 Before use Connect wires The ISO male connectors are not supplied. Caution •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on its bottom. Write the numbers here: Model No.: __________________________ Serial No.
Connector Connect to Connector 4 Red wire 5 6 7 8 2 The +12V power terminal which is live in the accessory (ACC) position of the ignition switch. If there is no accessory position, connect to the +12V car battery terminal that is always live. Make sure that the black ground (earth) lead is connected to a metal surface of the car first.
2 Make sure that the car dashboard opening is within these measurements: 4 Place the supplied rubber cushion over the end of the mounting bolt. 5 Slide the system into the sleeve until you hear a "click". 6 Attach the trim plate. 7 Reconnect the negative terminal of the car battery. m 5m mm 53mm 183 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Note •• If the system is not fixed by sleeve but by the supplied screws, skip this step. 3m 53.
4 Get started 3 4 5 6 Rotate Press Rotate Press to set the hour. to confirm. to set the minute. to confirm. Turn on Set the clock format Press . »» [WELCOME] scrolls. 1 • To turn off the system, press and hold until [GOODBYE] is displayed. Change system settings 1 2 3 Press and hold menu. to access the system Press repeatedly to select an option.
5 Listen to radio Tune to a radio station 1 Select a radio region You can select a radio region that matches your location. 1 2 3 Press and hold menu. to access the system Rotate to select an option. • [USA] (United States) • [EUR] (Western Europe) • [RUS] (Russia) • [AUS] (Australia) • [EAS] (Middle East) • [ASI] (Asia Pacific) • [JAP] (Japan) • [LAT] (Latin America) To receive stations with strong signals only or more radio stations, you can change the tuner sensitivity.
4 Repeat steps 2 and 3 to store more radio stations. • To replace a radio station, store another one in its channel. Tune to a preset station 1 2 Press repeatedly to select a band. Press a numeric key to select a preset station. Play with RDS Enable the RDS function Note •• The RDS function is enabled by default. 2 3 Press and hold menu. to access the system Press repeatedly until [RDS] is displayed. Rotate to select [RDS ON]. »» The RDS function is enabled.
Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that transmits the same program. 1 2 3 Press and hold menu. Rotate to select a setting: • [AF ON]: Enable the AF function. • [AF OFF]: Disable the AF function. Set the region for AF tuning You can set the region for AF tuning: [REG OFF] 1 2 3 Only RDS stations in current region can be tuned to automatically. All RDS stations can be tuned to automatically.
6 Use Bluetooth devices With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Tip •• You can also control the play on the Bluetooth device. Make a call Note Pair a device Note •• WOOX Innovations does not guarantee compatibility with all Bluetooth devices. •• Before pairing a device with this system, read its user manual for compatibility. On your device, follow the steps below. 1 2 3 Enable it to search for other Bluetooth devices.
7 Play from a USB storage device This system can play .mp3 and .wma files that are copied onto a compatible USB storage device. Control play During play, follow the instructions below to control play. Buttons Pause or resume play. / Note •• WOOX Innovations does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file system is not supported. RESET 1 2 Connect the USB storage device to the socket. Press repeatedly until [USB] is displayed.
8 Listen to an external device You can use the system to amplify the audio input that is transferred from an external device, for example, MP3 player. 1 2 3 17 Press repeatedly to switch the source to [MP3-LINK]. Connect the MP3 link cable to • the MP3-LINK socket on the system, and • the audio output socket (usually the headphone socket) on the external device. Play the external device.
9 Use the dock 2 Pull out the dock bracket until you hear a "click". An application CarStudio is available in the iTunes App Store for this car audio system. To enjoy full features, download the application to your iPhone or iPod touch. K CLIC Note •• If the CarStudio application is not installed, a dialog box prompts you to download it when your iPhone or iPod touch is docked and recognized.
1 2 Connect your iPhone or iPod touch to the dock with its screen facing you. »» The system switches the source to [iPHONE] automatically. If not, press repeatedly to switch the source. 1 Turn the dock bracket anti-clockwise by 90 degrees. 2 Adjust the viewing angle. Pinch the hooks to secure your iPhone or iPod touch. Switch to portrait mode 1 Turn the dock bracket clockwise by 90 degrees. 2 Adjust the viewing angle.
Pair your iPhone via Bluetooth Note •• To use the hands-free function, pair your iPhone with the car audio system via Bluetooth first. •• Make sure that the Bluetooth feature is enabled on your iPhone. For an iPhone using iOS 4.X or under • Manually complete the pairing. (Refer to "Use Bluetooth devices" > "Pair a device") For an iPhone using iOS 5.X • For the first time, manually complete the pairing. Afterwards, the pairing is automatically complete after your iPhone is docked and recognized.
1 Press and hold RELEASE to loosen the hooks. K CLIC 2 2 Push the dock panel inwards until you hear a "click". Pull out your iPhone or iPod touch. CLICK 3 Tip •• For the safety of your property, undock your iPhone or iPod touch before leaving your car. Store the dock bracket Note •• Before storage, make sure that you have unloaded your iPhone or iPod touch and pinched the hooks. 1 Flip the dock bracket downwards until you hear a "click". »» You can see the indication line on top of the dock panel.
10 Adjust sound The following operations are applicable to all compatible media. Adjust the volume level Rotate clockwise or anti-clockwise. Mute sound Press . • To restore sound, press Enable the full-range sound Press repeatedly to select one of the following settings. • [FULL ON]: Enable the full-range sound • [FULL OFF]: Use the preset equalizer that you select Select a preset sound equalizer 1 again. 2 Use the DBB sound effect Press and hold until one of the following settings is displayed.
11 Adjust system settings 1 2 3 Press and hold menu. Press repeatedly until one of the following settings is displayed. • [BEEP], [BKO], [DIMMER], or [DEMO] Rotate [BEEP] [BKO] [DIMMER] [DEMO] 23 to access the system EN to change the setting. [BEEP ON] [BEEP OFF] [BKO 10S] Enable the beep sound of buttons. Disable the beep sound of buttons. Turn off the screen automatically 10 seconds after the last operation. [BKO Turn off the screen 20S] automatically 20 seconds after the last operation.
12 Additional information SUB-W L R REAR LINE OUT Reset the system You can reset the system to factory default settings. Note •• If the new fuse gets damaged again, there may be an internal malfunction. Consult your dealer.. 1 2 Open the protective cover for the USB socket, MP3-LINK socket, and RESET button. Press RESET with the tip of a ball-point pen or toothpick. »» The system is reset. Replace the fuse If there is no power, check the fuse and replace it if it is damaged.
13 Product information Note •• Product information is subject to change without prior notice. Power supply 12 V DC (11V - 16V), negative ground Fuse Suitable speaker impedance Maximum power output Continuous power output 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 2.5 V 500 mV 188 x 58 x 199.5 mm 1.
14 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available. General No power or no sound.
15 Glossary M MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. W WMA (Windows Media Audio) An audio format owned by Microsoft, is a part of Microsoft Windows Media technology. Includes Microsoft Digital Rights Management tools, Windows Media Video encoding technology, and Windows Media Audio encoding technology.
EN 28
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CMD310_12_UM_V3.
