User manual

11
English
EN
Tune to a radio station
1
Press repeatedly to switch the source
to [RADIO].
2 Press repeatedly to select a band:
[FM1], [FM2], [FM3], [MW1], or [MW2].
3 Press and hold or until the
frequency digits blink.
4 Press or repeatedly to tune to a
radio station manually.
» The radio station is broadcast.
• To search for a radio station
automatically, press
or .
Store radio stations in
memory
Note
•
You can store a maximum of six stations in each band.
Store stations automatically
1 Press and hold to access the system
menu.
2 Press repeatedly until [STORE >] is
displayed.
3 Press toconrm.
» The strongest stations of the selected
band are saved in preset channels
automatically.
Store stations manually
1 Press repeatedly to select a band.
2 Tune to a radio station that you want to store.
3 Press and hold a numeric button for three
seconds.
» The station is saved in the selected channel.
4 Repeat steps 2 and 3 to store more radio
stations.
• To replace a radio station, store
another one in its channel.
Tune to a preset station
1
Press repeatedly to select a band.
2 Press a numeric key to select a preset
station.
Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, the station name is displayed.
Enable the RDS function
Note
•
The RDS function is enabled by default.
1 Press and hold to access the system
menu.
2 Press repeatedly until [RDS] is
displayed.
3 Rotate to select [RDS ON].
» The RDS function is enabled.
• To disable the RDS function, rotate
to select [RDS OFF].
Select a program type
Before tuning to RDS stations, you can select
a program type to search for programs of the
selected category only.
1 Press and hold to access the system
menu.
2 Press repeatedly until [PTY >] is
displayed.