Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your car audio system Introduction What's in the box Overview of the system 4 4 5 5 5 6 3 Before use 8 4 Get started 11 Install the car audio system Power on Change system settings Set the clock Select a source 5 Listen to radio Select a radio region Select a tuner sensitivity Tune to a radio station Store radio stations in memory Tune to a preset station Play with RDS 6 Use Bluetooth devices Pair a device Play audio from a connected device Make a call 8 11 11 1
1 Important Safety Read and understand all instructions before you use the device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To reduce the risk of traffic accidents, do not pick up or make a phone call, nor watch video when driving.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. • • • Introduction Maximum level of directory: 8 Unsupported formats AAC, WAV, PCM audio files DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac) WMA files in Lossless format Android-powered phones • Android version: V2.2 or above • Bluetooth version: V2.
Overview of the system u t sr q p on a b c d ef jk ghi a b c f • • Press to answer or redial a call. Press to hang up a call. • • • Tune to a radio station. Press to skip to the previous track. Press and hold to rewind a track. • Press to enable or disable the full sound. Press and hold to access the sound setting menu. • d e • • Press repeatedly to select a source. Press and hold to activate the selection of listening zones.
i • • • j • • k • • • In radio mode, press to select the preset radio station of No. 4. In radio mode, press and hold to store the current radio station at channel No. 4. For tracks, press to start playing all tracks in the current album or folder randomly. In radio mode, press to select the preset radio station of No. 5. In radio mode, press and hold to store the current radio station at channel No. 5. s • • • • • • Press to turn on the system. Press and hold to turn off the system.
3 Before use Caution •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model number and serial number of your car audio system. The model number and serial number are on its bottom. Write the numbers here: Model No.: __________________________ Serial No.: ___________________________ Install the car audio system These instructions are for a typical installation.
Connector Connect to 4 Red wire 5 6 7 8 The +12V power terminal which is live in the accessory (ACC) position of the ignition switch. If there is no accessory position, connect to the +12V car battery terminal that is always live. Make sure that the black ground (earth) lead is connected to a metal surface of the car first.
1 Make sure that the car dashboard opening is within these measurements. 4 Slide the system into the dashboard until you hear a "click". m 5m mm 53mm 183 5 2 Attach the trim plate. Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Note •• If the system is not fixed by sleeve but by the supplied screws, skip this step. 6 3m 53.5 mm 18 3 8 m Place the supplied rubber cushion over the end of the mounting bolt.
4 Get started 2 Power on 3 4 5 6 Press . »» [WELCOME] scrolls. • To power off the system, press and hold until [GOODBYE] is displayed. Change system settings 1 2 3 Press and hold menu. to access the system Press repeatedly to select an option. • [BT RECON]/[DISCONNECTED] • [RDS] • [PTY >] • [RDS AF] • [RDS TA] • [TP STORE] • [RDS REG] • [RDS CT] • [STORE >] • [AREA] • [LOCAL] • [CLOCK] • [CLOCK 12H] • [BEEP] • [BKO] • [DIMMER] • [DEMO] Rotate to select a setting. • To exit the setting, press .
5 Listen to radio Tune to a radio station 1 Select a radio region You can select a radio region that matches your location. 1 2 3 Press and hold menu. to access the system Rotate to select an option. • [USA] (United States) • [EUR] (Western Europe) • [RUS] (Russia) • [AUS] (Australia) • [EAS] (Middle East) • [ASI] (Asia Pacific) • [JAP] (Japan) • [LAT] (Latin America) To receive stations with strong signals only or more radio stations, you can change the tuner sensitivity.
4 Repeat steps 2 and 3 to store more radio stations. • To replace a radio station, store another one in its channel. Tune to a preset station 1 2 Press repeatedly to select a band. Press a numeric key to select a preset station. The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, the station name is displayed. Enable the RDS function Note •• The RDS function is enabled by default. 2 3 Press and hold menu.
Use alternate frequencies • If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that transmits the same program. 1 2 3 Press and hold menu. to access the system Press repeatedly until [RDS AF] is displayed. Rotate to select a setting: • [AF ON]: Enable the AF function. • [AF OFF]: Disable the AF function.
6 Use Bluetooth devices With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Tip •• You can also disable the Bluetooth function on this connected device. Reconnect a device 1 2 Pair a device Note •• WOOX Innovations does not guarantee the compatibility with all Bluetooth devices. •• Before pairing a device with this system, read its user manual for Bluetooth compatibility. Make sure that the Bluetooth firmware version of the device is V2.1 or later.
Note •• If the connected device does not support the AVRCP profile, control play on the connected device. Transfer a phone call to mobile phone By default, voice comes from the loudspeakers during a call. 1 Make a call Note •• Keep the Bluetooth connection active between the system and your mobile. Call a number On your mobile, call a number. »» [CALL---] is displayed. Redial the last called number 1 2 Press . »» [REDIAL] is displayed. Press to confirm. »» [CALL---] is displayed.
7 Play from a USB storage device This system can play .mp3 and .wma files that are copied onto a compatible USB storage device. Control play During play, follow the instructions below to control play. Buttons / Note •• WOOX Innovations does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file system is not supported. RESET 1 2 Connect the USB storage device to the socket. Press repeatedly until [USB] is displayed. »» Play starts automatically.
8 Listen to an external device You can use the system to amplify the audio input that is transferred from an external device, for example, MP3 player. 1 2 3 Press repeatedly to switch the source to [AUDIO-IN]. Connect the MP3 link cable to • the AUDIO-IN socket on the system, and • the audio output socket (usually the headphone socket) on the external device. Play audio on the external device (refer to its user manual).
2 Pull out the dock bracket until you see the yellow lines and hear a "click". Connect your phone You can connect your phone to the dock directly or though the supplied USB cable. Dock your phone K CLIC Note •• Make sure that the width of your phone is between 52 mm and 73 mm. 3 Flip the dock bracket upwards. •• Before docking your phone, make sure that the dock bracket is in portrait position. 1 4 Flip out the USB connector or hide it in the dock.
3 Connect your phone to the dock with its screen facing you. • To match the USB socket of your phone, turn the USB connector by 180° as illustrated if necessary. Connect the USB cable between • the USB socket of your phone, and • the USB socket in the dock. 4 Pinch the hooks to secure your phone. Adjust the dock bracket Caution •• When the dock bracket is in portrait position, do not turn it clockwise. •• When the dock bracket is in landscape position, do not turn it anti-clockwise.
2 Adjust the viewing angle. 1 Run the Google Play Store (Play store) application on your phone. Switch to portrait mode 1 Turn the dock bracket clockwise by 90 degrees. 2 2 Tap to display the search interface. Adjust the viewing angle. Install the CarStudio application Note •• Make sure that the internet connection is active on your phone.
3 Type in CarStudio and then tap Search (Search). Use the CarStudio application Note CarStudio •• To use the hands-free function or play audio through the dock, connect your phone with the car audio system via Bluetooth first. •• To enjoy the latest features, update the application on your phone when an update message prompts. •• After update, the interface and features may be different from the description in this section. Follow the actual operations.
• 2 To switch the interface for more features, swipe on the screen. Tap an icon to access its feature or change settings. • (phone): Make a phone call • (map): Run the map application that is installed on your phone. • (music): Play music • (radio): Listen to radio • (Voice Search): Run the Voice Search application that is installed on your phone. • / (Bluetooth connection): Search for Bluetooth devices or break the current connection.
Store the dock bracket 10 Adjust sound The following operations are applicable to all compatible media. Note •• Before storage, make sure that you have unloaded your phone and pinched the hooks. 1 Flip the dock bracket downwards until you hear a "click". »» You can see the indication line on top of the dock panel. If not, pull the dock panel outwards until you see it. Adjust the volume level Rotate clockwise or anti-clockwise. Mute sound Press . • To restore sound, press again.
2 • [FRONT]: For front passengers only Rotate to select a setting. Enable the full-range sound Press repeatedly to select one of the following settings. • [FULL ON]: Enable the full-range sound • [FULL OFF]: Use the preset equalizer that you select Select a preset sound equalizer 1 2 Press and hold until [EQ] and the name of current equalizer are displayed. Rotate to select one of the preset sound equalizers.
12 Additional information SUB-W L R REAR LINE OUT Reset the system You can reset the system to factory default settings. Note •• If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur. In this case, consult your WOOX Innovations retailer. 1 2 Open the protective cover for the USB socket, MP3-LINK socket, and RESET button. Press RESET with the tip of a ball-point pen or toothpick. »» The system is reset.
13 Product information Note Bluetooth Output power Frequency band Range Standard 0 dBm (Class 2) 2.4000 GHz - 2.4835 GHz ISM Band 3 meters (10 feet in free space) V2.0 •• Product information is subject to change without prior notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11V - 16V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.
14 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
15 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance 1177 This product complies with the radio interference requirements of the European Community. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Specifications are subject to change without notice. 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. CMD305A_05_UM_V3.
