Register your product and get support at www.philips.
1 2 3 4 Important 4 Safety Notice 4 4 7 Additional information 21 Detach the front panel Replace fuse Remove the unit 21 21 21 Product information 22 Your car audio system 6 Introduction What’s in the box Overview of the main unit Overview of the remote control 6 6 7 8 9 10 Troubleshooting 23 Get started 9 11 Glossary 24 Install the car audio Install remote control battery Turn on Set clock 9 13 13 13 Listen to radio 14 Tune to a radio station Store radio stations in memory Tun
1 Important Safety Read and understand all instructions before you use your apparatus. If damage is warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. ! ! a safe and comfortable level. Improper fuses can cause damage or " consult a professional.
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. 2011 © Koninklijke Philips Electronics N.V. All rights reserved. Eng lis h product is covered by the European Directive 2002/96/EC: * notice.
d Trim plate 2 Your car audio system e Carrying case for front panel f ISO male connector g Rubber cushion $ G H G at www.philips.com/welcome.
a b r q c d e p f o n u a SOURCE Select audio source. b MENU Access system menu. c d Return to previous menu. / m l t k g j i h s Turn the unit on or off. $ Mute or unmute sound. Rotate to adjust volume. e ZONE / Select tuner band. Select MP3/WMA folder. Switch music listening zone.
f Eject disc. r BAND g USB socket. Select tuner band. s RESET h MP3 LINK i Unlock the panel. Connect external audio device. Restore default settings. t SD card slot u Disc slot 6281' Turn on or off Maximizing volume. View clock. j DBB Overview of the remote control Turn on or off Dynamic Bass Boost (DBB) sound. Access to tuner auto store. Select preset radio station No.6. Start play. b Pause or resume play.
Skip track. Fast backward/forward playback 3 Get started Eng lis h d SOURCE Select audio source. e EQ Caution Use the controls only as stated in this user manual. Select equalizer (EQ) settings. f OFF / / Turn the unit on or off. Mute or restore volume. Always follow the instructions in this chapter in sequence. ] G model and serial number of your apparatus.
Note on the power supply lead (yellow) When you connect other devices to this circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another.
If you disconnect the car battery in a car that has an on-board drive or ! may lose its memory. ] ! J bare wires do not touch each other.
3m 53.5 mm 18 5 m Place the supplied rubber cushion over the end of the mounting bolt. 7 Reconnect the negative terminal of the car battery. Attach the front panel 6 Slide the unit into the dashboard until you hear a click sound. 12 EN 1 2 Attach the trim plate. 3 Press the left side of the panel until the mechanism locks it into place. Insert the right side of the panel in the chassis until it is correctly engaged.
Select country/region Note Caution } # H ~ Eng lis h Install remote control battery % ! Risk of decreased battery life! Never mix different brands or types of batteries. Risk of product damage! When the remote control is ! Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
View clock ] MAX SOUND until the clock is displayed. Press any key to cancel the clock display. 4 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select radio mode. 2 Press BAND or / repeatedly to select band: [FM1] [FM2] [FM3] [AM1] [AM2] . 3 Press and hold or until the [ 4 Press or to tune to a radio station manually. » The radio station is broadcast. press or .
Press MENU repeatedly until [LOCAL] is displayed. 2 Rotate 5 Play audio files Eng lis h 1 to select a setting: [LOCAL ON] (local on): Only stations with strong signal can be broadcast. Note + ! [LOCAL OFF] (local off): Stations with strong and weak signals can be broadcast. Play a disc Store radio stations in memory You can store up to 6 stations in each band.
» The unit starts playing from the card automatically. Tip ] hold until the disc comes out. Play from USB Note Ensure that the USB device contains playable music. Remove the card Insert the USB device 1 2 Slide the USB socket cover marked the left. 1 2 Press 3 Remove the card. to Insert the USB device into the USB socket. » The unit starts playing from the USB device automatically. to turn off the unit.
! . Connect external sound source 1 Connect the external sound source to Eng lis h Tip MP3 LINK socket with a 3.5 mm cable. View play information 2 Press SOURCE repeatedly until [MP3 LINK] is displayed. , 3 Operate the external component (refer to the instructions supplied with the external component).
6 Adjust sound » Current Equalizer setting is displayed. 2 Adjust volume Turn clockwise/counterclockwise to increase/ decrease volume. Mute You can turn off the sound of your audio. , . Press EQ / AUDIO again to select a preset EQ setting: [OPTIMAL] (optimal) [FLAT] [ @ [POP] (pop) [USER] (user) [TECHNO] (techno) [ROCK] (rock) [CLASSIC] (classic) [JAZZ] (jazz) again.
3 [BAL] (balance) range: 12L to 12R. } @ [FAD] (fader) range: 12R to 12F. } @ Rotate 7 Adjust system settings Eng lis h to select a value. Turn beep sound on/off + You can turn off/on this beep sound. 1 2 Press MENU. 3 Rotate Press or displayed. repeatedly until [BEEP] is to select a setting: [BEEP ON]: Turn on the beep sound. [BEEP OFF]: Turn off the beep sound.
Dance You can turn on or off the spectrum on the LCD display. 1 2 Press MENU. 3 Rotate Press or displayed. repeatedly until [DANCE] is to select a setting: [DANCE ON] : Turn on the spectrum. [DANCE OFF] : Turn off the spectrum. Rear Aux 1 2 3 Press MENU. Press or is displayed. Rotate repeatedly until [TEL MUTE] to select a setting: [NORMAL] ? [MUTE] is displayed. [REAR AUX] ? [PHONE IN] is displayed.
3 Replace the fuse. Eng lis h 8 Additional information Detach the front panel You can detach the front panel to deter theft. 1 2 Press to release the panel. Pull the panel towards you to disengage it from the chassis. Note ] internal malfunction. Consult your Philips dealer. Remove the unit 3 Store the panel in the supplied carrying case to protect it from dirt or damage. Replace fuse You can remove the unit from the dashboard.
9 Product information * [ ? * 2.
Caution + $, $,> CD-R/CD-RW. Ensure that the CD is not encoded with copyright protection technologies. Eng lis h 10 Troubleshooting The CD skips tracks Never remove the casing of this apparatus. ! ! the system yourself. If you encounter problems when using this requesting service.
11 Glossary M MP3 F system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio " G $,J} CD-RW can contain about 10 times more data than a regular CD. S SD Secure Digital.
ధ 3E /HDG ܌+J 0HUFXU\ ᬄ &G FDGPLXP ࡒ۴ &KURPLXP أᜌ৷Ъ 3%% أᜌفЪ 3%'( +RXVLQJ ທक़ 2 2 2 2 2 2 '9' &' ORDGHU '9' &' ܿދ ; 2 2 2 2 2 /&' 3DQHO ၅ࣚ૯ϴ ; ; 2 2 2 2 3:%V ϴቊࡵ ; 2 2 2 2 2 $FFHVVRULHV 5HPRWH FRQWURO FDEOHV ࡵڼIJီ३చĶ ჻ཐĶ৹ࢨཐij ; 2 2 2 2 2 %DWWHULHV LQ 5HPRWH &RQWURO =Q& ီ३చԁ ; 2 2 2 2 2 ¾ń њ൙ۂႹႹݡ༂ᇍᄡۂҊࡵෲႹबᇍҏਜᇓ֩ݧबᄡ6- 7 їም݃֩ཏဵၟ༳ 2 ,QGLFDWHV WKDW WKLV WR[LF RU KD]DUGRXV VXEVWDQFH FRQWDLQHG LQ DO
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. CEM2100_IFU_00_V2.
Register your product and get support at www.philips.
English Contents 1 Important Safety Notice 2 Your car stereo speakers Introduction What’s in the box 3 Installation Mount the woofer Mount the Tweeter Mount the network Connect the woofer/tweeter to the network 4 4 4 5 5 5 6 6 7 8 9 4 Product information 10 5 Troubleshooting 11 EN 3
1 Important Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Safety • • • • • Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use only the supplied mounting hardware for a safe and secure installation. Do not continuously use the speaker system beyond the peak power handling capacity.
a Woofer (x2) b Grille assembly (x2) English 2 Your car stereo speakers c Tweeter (with wire) (x2) d Network (x2) Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. e Speaker wire (x4) f Angle adapter (x2) g Fix frame (x2) h Mounting bracket (x4) Introduction i Screw With the woofers and tweeters, you can enjoy high power music with vivid sound.
3 Installation A depth of at least 52mm is required to mount the woofer and a depth of at least 19mm is required to mount the tweeter. Measure the depth of the area where you are to mount the woofer/tweeter, and ensure that the woofer/tweeter does not obstruct any other components of the car. 1 Turn off the car ignition key. • If the power is on, the click noise generated by the connection may damage the speakers.
Mount on the speaker as shown below. Follow the steps in section “Option 1: Mount in door” to mount the speakers into the rear tray. English 7 Mount the Tweeter Follow steps mentioned in “Mount the woofer” section to mount the tweeters. Option 1: Flush mounting 8 Press and insert the edges of the grille net. Option 2: Flush mounting Tip • The speaker grille can be mounted without the grille net, if you like.
Option 4: Surface mounting Option 5: Angle mounting 8 EN Mount the network 1 Find a proper location to mount the networks. 2 Mount the networks onto the car with the supplied screws.
English Connect the woofer/tweeter to the network Note • Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality. • Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the amplifier. Most two channel amplifiers work well in this configuration. However, if two 4-ohm speakers, wired in parallel to a bridged two -channel amplifier, present a 2-ohm mono load to the amplifier.
4 Product information Note • Product information is subject to change without prior notice. Model CSP550 CSP650 Speaker type 13cm, 2-way component speaker 16.5cm, 2-way 16.5cm, 2-way component speaker component speaker RMS power (Watts) 40W 50W 60W Peak music power (Watts) 210W 240W 300W Sensitivity (dB/W/m) 90dB 90dB 91dB Frequency response (Hz) 40-35kHz 36-35kHz 34-35kHz Impedance (ohms) 4ohm 4ohm 4ohm Magnet mass(Oz) 11Oz 12.6Oz 18.
English 5 Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, go to the Philips web site (www.philips.com/ welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: CSP550_55_UM_V2.
