Register your product and get support at www.philips.com/welcome EN User manual =+ +.
ႹႹݡ༂ᇍࠋჱෑ Hazardous/toxic Substance Ҋࡵӯ Name of the Parts ( ܌Hg, Mercury) ᬄ (Cd, cadmium) ࡒ۴ أᜌ৷Ъ أᜌفЪ (Pb, Lead) (Chromium 6+) (PBB) (PBDE) O O O O O O DVD/CD loader DVD/CD ܿދ X O O O O O LCD Panel X X O O O O X O O O O O X O O O O O X O O O O O Housing ధ ທक़ ၅ࣚ૯ϴ PWBs ϴቊࡵ Accessories (Remote control & cables) ࡵڼIJီ३చĶ ჻ཐĶ৹ࢨཐij Batteries in Remote Control (ZnC) ီ३చԁ ¾ńњ൙ۂႹႹݡ༂ᇍᄡۂҊࡵෲႹबᇍҏਜᇓ֩ݧबᄡSJ/T11363 - 2006 їም݃
1 Important Safety Notice 7 Play with Bluetooth device 4 4 4 Pair the Bluetooth-enabled devices Make a call Receive call Listen to music from Bluetooth device Adjust Bluetooth settings 8 Adjust sound 2 Your in-car entertainment system Introduction What’s in the box Overview of the main unit 3 Get started Install the car audio Turn on Adjust screen Set date and time 4 Use map Upgrade the map 5 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station 6 Play Load
1 Important • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Safety • • • • • • • • • • • • • • • 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are those of their respective owners. This product complies with the radio interference requirements of the European Community. 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2 Your in-car entertainment system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
English Overview of the main unit p o n a m b l c k d j e i f h g h a • b DISC • Select the disc source. c • Terminate call. d AMB • Display the air conditioning information. e /MAP • Open the cover and insert/remove the SDHC/GPS map card. f A/C • Turn on/off the air conditioner. g • • Eject disc. Turn on the rear window defroster. i AV IN/ • Open the cover and connect the AV IN/USB device. j • • • /MUTE/VOL Turn the unit on or off. Mute or unmute audio. Adjust volume.
n DISP/ / • Adjust screen brightness. • Turn on/off the screen display. 3 Get started o • Caution Built-in microphone for phone calls. p Disc slot • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Install the car audio These instructions are for a typical installation.
English Notes on speaker connection • Never connect speaker wires to the metal body or chassis of the car. • Never connect speaker wires with stripes to one another. Connect wires Caution • Ensure that all loose leads are insulated with electrical tape. 1 Check the car’s wirings carefully, then connect them to the unit.
Mount in the dashboard Note • Check wire connections before you mount the unit into a car. • If preset radio stations are lost when the ignition key is turned OFF and then back ON, reconnect the red leads crosswise to the yellow ones. 2 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lost its memory.
English Adjust screen To adjust screen brightness 1 Press DISP/ / bar. 2 3 Tap / to adjust the value. • 5 Reconnect the negative terminal of the car battery. to show the brightness Press DISP/ / to confirm. To turn on/off the screen, press and hold DISP/ / . Set date and time 1 Tap the upper left corner to display the main menu. 2 Tap in the middle right side of the screen. » The second main menu is displayed. 3 4 Tap [Settings].
Set date 1 2 4 Use map Tap [Date]. Tap on the displayed date information. » A submenu is displayed. Note • You may need to upgrade the map (sold separately) before using it (see “Upgrade the map” section) 3 Tap or to set year, month and day. 1 Tap the upper left corner to display home menu. 2 Tap [Navigation]. » The navigation menu is displayed in a few seconds. 3 Refer to the map manual to operate the navigation tool. Set clock mode 1 Tap [Clock mode] .
Insert the upgraded map card back into the map card slot. 6 Turn on the car audio. » The map upgrades in a few minutes. 5 Listen to radio English 5 Tune to a radio station 1 2 Tap 3 Tap on FM or AM to select band: • FM band options: FM1, FM2, FM3 • AM band options: AM1, AM2 4 Briefly tap or to tune to a radio station by step. • Tap or for more than 1 second to tune to a radio station automatically. to display the home menu. Tap [Radio]. » Band and frequency information is displayed.
5 Tap to confirm. » The radio station is broadcast. Select radio range Before you start to search for radio stations, you can select radio range. 1 2 Tap . Tap [Radio range] to toggle tuner sensitivity from normal to high sensitivity. • [Distance]: Only stations with strong signals can be broadcast. • [Local]: Stations with strong and weak signals can be broadcast.
Connect USB device English 6 Play Note Load discs • Ensure that the device contains playable content. You can play video, audio or images stored on the following discs: • DVD video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW 1 2 Open the AV-IN/USB socket cover. Insert the USB device to the USB socket. » Play starts automatically. Note • Ensure that the disc contains playable content. 1 Insert a disc into the disc slot with the label side facing up. » Play starts automatically.
2 Tap one of below icons to select folder/ file: • • Remove the SD/MMC card 1 2 3 Press the card until you hear a click sound. » The card is now disengaged. Remove the SD or MMC card. Play/Pause 1 • Switch to another source. 3 4 : To display all available audio folders/track. : To display all available picture folders/files. : To display all available video folders/files Tap or Tap to start play. to select a folder/track.
Repeat a section During play, you can select different repeat play modes. You can repeat a specific section of video file (repeat A-B). For DVD/VCD movie disc: 1 Tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Tap to display the 2nd menu. English Repeat 1 During play, tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Tap to display the 2nd menu, if necessary.
Select audio mode Zoom When you play VCDs, you can select an audio mode (R/L/Stereo). You can zoom in pictures for a close view. 1 During play, tap anywhere except for the upper left corner to display menu on the screen. 2 Tap repeatedly until the audio mode is selected. 1 During picture viewing, tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Tap 3 Tap , , or to pan through the enlarged picture. repeatedly to zoom in the picture.
4 Enter default password “0000”. » if pairing succeeds. phone call record is displayed. You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Disconnect Bluetooth devices Pair the Bluetooth-enabled devices To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to eight devices.
» The voice is transferred from the unit’s loudspeaker to the mobile phone. Listen to music from Bluetooth device • • • • • • Or tap to dial. [Missed calls] [Received calls] [Dialed calls] [Phone book] [Sim phone book] [Local phone book] to dial number directly, then tap If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit.
In Bluetooth menu, tap . » The option menu is displayed. 8 Adjust sound English 1 Adjust volume 2 1 Turn /MUTE/VOL button clockwise to increase volume. 2 Turn /MUTE/VOL button anti-clockwise to reduce volume. Tap an option to change the setting. Tip Mute • You can also adjust Bluetooth settings in the “Settings” menu. 1 During play, press /MUTE/VOL. • To restore the sound, press / MUTE/VOL again. Tip • You can also tap on the screen to turn off sound.
3 4 Tap Tap • • • • • • or 5 Tap F, R, L, or R to adjust fader/balance value. • [Fade] fader range: +24 to -24. (F = front speaker, R = rear speaker) • [Balance] balance range: -24 to +24. (L = left speaker, R = right speaker) 6 Tap to exit. to select an EQ. or to adjust below settings: [Bass] bass range: -14 to +14 [Mid] middle range: -14 to +14. [Treb] treble range: -14 to +14 [LPH] low pass filter range: 60, 80, 100, 200. [MPF] middle pass filter range: 500, 1K, 1.5K, 2.5K.
Display system setup menu 1 Tap to display main menu. 2 Tap in the middle right side of the screen. » The second main menu is displayed. 3 Tap [Settings]. » The settings menu is displayed. Tip • When the setup adjustment is completed, tap first and then tap to return to main menu. Adjust general settings 1 Tap [General], if necessary. 2 Tap or 3 Tap on the option to display/select an option. General settings [Radio region] [Radio range] Options Description [USA], [S.
[Red] Turn background color to red. Select F1 picture as wall paper. Calibrate the touch screen. Adjust video settings 1 Tap [Video]. Adjust sound settings 2 Tap an option repeatedly to select: 1 Video settings [Aspect ratio] [F1] [Calibration] 4 Tap to exit. Tap [Sound]. [Video input] 2 Tap an option repeatedly to select: Sound Options Description settings [Sub [On] Turn on the subwoofer. woofer] [Off] Turn off the subwoofer. [Sub [80Hz] Select subwoofer filter woofer criteria.
[Parking] [On] [Off] [DivX registration code] 3 Tap When you drive in reverse, the rear view is displayed in mirror. Disable video view during drive. Enable video view during drive. View code for DivX registration. [Off] [Pairing code] 3 Tap Answer phone call manually. View code for pairing the unit with other Bluetooth devices. to exit. Adjust language settings to exit. 1 Tap [Language]. 2 Tap an option repeatedly to select: Adjust Bluetooth settings 1 Tap [Bluetooth].
[Disc menu] [English] Select DVD menu language. Options available are depends on DVD disc. [ࡩᇓ໗] [ْᇓ໗] 3 Tap to exit. Adjust volume settings You can set different volume for different modes. 1 Tap [Volume]. » The volume setting sub-menu is displayed. 2 Tap on a source. • [DVD] • [USB] • [SDHC] • [Radio] • [Bluetooth] • [AV-IN1] • [AV-IN2] • [Navigation] 3 Tap or to assign a value: 0 to 12. » When you switch to the source, the volume increases automatically. 4 Tap to exit.
Reset English 10 Others When the unit hangs up, you can reset it. Listen to other devices 1 2 Open the MAP/SD card socket cover. Press the RESET button with a ball-point pen or similar tool. Tip • When air conditioning information changes, the air conditioning information interface will be displayed for 10 seconds. You can connect an external audio/video device to the unit. 1 Connect the device to the unit with the supplied AV cable. Tip • When the unit is reset, all the settings remain unchanged.
Replace fuse If there is no power, the fuse may be damaged and need to be replaced. 1 2 3 Take out the unit from dashboard. 4 Replace the fuse. Check the electric connection. Buy a fuse that matches the voltage of the damaged fuse (15A) 11 Product information Note • Product information is subject to change without prior notice.
Frequency range - FM 87.5 - 108.0 MHz (Europe) Frequency range 522 - 1620 KHz AM(MW) (Europe) Usable sensitivity - FM 5 uV Usable sensitivity 50 uV AM (MW) LCD Screen size Display resolution Contrast ratio Brightness 8 inches (16:9) 800 x 480 dots 300 350 cd/m2 Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.
12 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Car engine has not been started.
• • The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. The system is not in the pairing mode. The system is already connected with another Bluetooth-enabled device. Disconnect that device or all other connected devices and then try again. English • The paired mobile phone connects and disconnects constantly. • The Bluetooth reception is poor.
13 Glossary B Bite rate The max data transfer through the USB port. Bluetooth Bluetooth® is a short-rang wireless protocol that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. The name refers to a Viking King who unified Denmark. Operate at 2.4GHz. For more information, see www.bluetooth.com. M MMC MultimediaCard. A type of memory card with a flash memory. MP3 A file format with a sound data compression system.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. CID3692_00_UM_V1.
