Register your product and get support at www.philips.
1 Important Safety Notice 4 4 4 Pair the Bluetooth-enabled devices Make a call Receive call Listen to music from Bluetooth device Adjust Bluetooth settings 8 Adjust sound 2 Your in-car entertainment system Introduction What’s in the box Overview of the main unit 3 Get started Install the car audio Turn on Set date and time 4 Use map Upgrade the map 5 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station Play with RDS (Optional) 6 Play Load discs Connect USB d
1 Important • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Safety • • • • • • • • • • • • • • • 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are those of their respective owners. This apparatus includes this label: This product complies with the radio interference requirements of the European Community.
2 Your in-car entertainment system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
l k a j b i c h d g f e a Disc slot b DISP/ / • Adjust screen brightness. • Turn on/off the screen display. c AV IN/ • Open the cover and connect the AV IN/USB device. d /MAP • Open the cover and insert/remove the SDHC/GPS map card. e TUNE/ SELECT • Skip to the previous or next title, chapter, or track. • Search backward/forward at different speeds. • Confirm an entry or selection. • Start, pause or resume play. f • • • h • Terminate call. i NAVI • Enter the GPS navigation system or exit.
3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Note on the power supply lead (yellow) • When you connect other devices to this system, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices.
Check the car’s wirings carefully, then connect them to the unit. Yellow Green English 1 Blue Yellow Radio antenna Brown/ black Orange/ white Green/white White/ brown Pink Blue/white GPS antenna Black Touch controller Yellow Rear screen Brown Red Red White White Yellow Red White Gearbox AV system AUX Amplifier Connect GPS antenna 2 To receive signal from satellites, connect the supplied GPS antenna to your car and the system.
4 Fix the mounting brackets to the unit with screws (supplied by the car manufacturer). 5 Slide the unit into the dashboard and fix it to the car with four screws. Mount in the dashboard Note • Check wire connections before you mount the unit into a car. • If preset radio stations are lost when the ignition key is turned OFF and then back ON, reconnect the red leads crosswise to the yellow ones.
Reconnect the negative terminal of the car battery. English 6 Turn on Caution • Risk of road accidents! Never watch video or adjust settings while you drive. 1 3 4 Tap [Settings]. Tap [Time] . » The date/time setup menu is displayed. Press and hold /MUTE/VOL to turn on the unit. » The available OSD (On-Screen Display) languages are displayed. Set date 2 Tap a language to select. » The OSD language is changed to the selected language immediately. • To turn off the unit, press and hold / MUTE/VOL.
Set time 1 2 4 Use map Tap [Time]. Tap on the displayed time. » A submenu is displayed. Note • You may need to upgrade the map (sold separately) before using it (see “Upgrade the map” section) 3 Tap or to set hour and minute. Tip • When date/time is set, tap first and then 1 Tap the upper left corner to display home menu. 2 Tap [Navigation]. » The navigation menu is displayed in a few seconds. 3 Refer to the map manual to operate the navigation tool. tap to return to main menu.
Insert the upgraded map card back into the map card slot. 6 Turn on the car audio. » The map upgrades in a few minutes. 5 Listen to radio English 5 Tune to a radio station 1 2 Tap 3 Tap FM or AM to select band: • FM band options: FM1, FM2, FM3 • AM band options: AM1, AM2 4 Briefly tap or to tune to a radio station by step. • Tap or for more than 1 second to tune to a radio station automatically. to display home menu. Tap [Radio]. » Band and frequency information is displayed.
3 4 5 Tap [Goto]. Tap the numbers to enter frequency. • Tap to clear the last entered number. • Tap to clear all the entered numbers. Tap to confirm. » The radio station is broadcast. Select radio range Before you start to search for radio stations, you can select radio range. 1 2 Tap . Tap [Radio range] to toggle tuner sensitivity from normal to high sensitivity. • [Distance]: Only stations with strong signals can be broadcast. • [Local]: Stations with strong and weak signals can be broadcast.
Before tuning to RDS stations, you can select program type and let the unit search only for programs of the selected category. 1 2 Tap FM band to select FM1, FM2, or FM3. Tap [PTY] . » List of available program type is displayed. 3 Tap or screen. 4 Tap on the selected program and then tap to activate searching.
[TA] (Traffic If you do not want to miss Announcement) traffic announcement during enjoying music, you can turn on the [TA] function. When there is traffic announcement, the unit switches to tuner mode (regardless of the current mode) and begins to broadcast the announcement on traffic conditions. When the traffic announcement is over, it returns to the previous mode. [REG] (Regional When [REG] is turned on, radio) only stations in the current region can be tuned to.
Countries where you bought the unit China Supported DVD region code English 6 Play Load discs You can play video, audio or images stored on the following discs: • DVD video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW Asia Pacific, Taiwan, Korea Latin America Russia, India Note • Ensure that the disc contains playable content. 1 Insert a disc into the disc slot with the label side facing up. » Play starts automatically. Connect USB device Note • Ensure that the device contains playable content.
2 Remove the USB device. Insert USB or SD/MMC card Note For DVD movie, if a menu appears, press SELECT to start play. TUNE/ • Ensure that the device contains playable content. • The unit supports SDHC card. 2 1 Open the AV-IN/USB/SD/MAP socket cover. 2 Insert the SD/MMC card into the SD/ MMC card slot. » Play starts automatically. To pause, tap . • To resume play, tap again. Tip • You can also press TUNE/ SELECT repeatedly to pause/resume play.
English Search within a title/folder Direct search 1 Tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Tap . » The search screen is displayed. 3 Tap to select: • [Repeat chapter]: play the current chapter repeatedly. • [Repeat title]: play all chapters in the title repeatedly. • [Repeat off]: cancel repeat play. For VCD karaoke: 1 » For video files, tap 3 first, then tap . Tap the numbers to enter chapter/file number, then tap .
• • • 4 [Repeat A-]: the start of the section to repeat. [Repeat A-B]: the end of the section to repeat. The selected section plays repeatedly. To exit A-B repeat mode, tap repeatedly until [Repeat A-B off] is displayed. Select subtitle language For DVD or DivX discs that contain two or more subtitle languages. 1 During play, tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 3 Tap to display the 2nd menu Tap repeatedly to select a language.
1 Tap anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Tap repeatedly to select: • Fast: 3 seconds • Normal: 5 seconds • Slow: 8 seconds 7 Play with Bluetooth device English Select slide show duration You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device.
• • • • • • Disconnect Bluetooth devices 1 To disconnect one device, tap » (green) is displayed. (red). Tip • The device will also be disconnected when the device is moved beyond the operational range. [Missed calls] [Received calls] [Dialed calls] [Phone book] [Sim phone book] [Local phone book] Or tap to dial. to dial number directly, then tap • If you want to reconnect the device to the unit, place it within the operational range.
During talking, tap . » The voice is transferred from the unit’s loudspeaker to the mobile phone. • [Phone Book Sync]: to synchronize phone book 1 In Bluetooth menu, tap . » The option menu is displayed. 2 Tap an option to change the setting. English 1 Listen to music from Bluetooth device If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit.
8 Adjust sound Adjust volume 1 Turn /MUTE/VOL button clockwise to increase volume. 2 Turn /MUTE/VOL button anti-clockwise to reduce volume. 3 4 Tap Mute Tap • • • • 1 • During play, press /MUTE/VOL. • To restore the sound, press / MUTE/VOL again. Tip • You can also tap • to select an EQ. or to adjust below settings: [Bass] bass range: -14 to +14 [Mid] middle range: -14 to +14. [Treb] treble range: -14 to +14 [LPH] low pass filter range: 60, 80, 100, 200.
6 Tap F, R, L, or R to adjust fader/balance value. • [Fade] fader range: +24 to -24. (F = front speaker, R = rear speaker) • [Balance] balance range: -24 to +24. (L = left speaker, R = right speaker) Tap to exit. 9 Adjust settings English 5 Display system setup menu 1 Tap 2 Tap in the middle right side of the screen. » The second main menu is displayed. 3 Tap [Settings]. » The settings menu is displayed. to display main menu. Set Dynamic Bass Boost (DBB) 1 Tap to toggle between the settings.
2 3 Tap or Tap on the option to display/select an option. General settings [Radio region] [Radio range] Options Description [USA], [S. Amer-1], [Arabia], [China],[S. Amer-2], [Europe], [Korea], [OIRT] [Local] Select one that matches your location. Only stations with strong signals can be broadcast. [Distance] Stations with strong and weak signals can be broadcast. [Blackout] [off] Never turn on the screen saver. [10s] Turn on the screen saver automatically 10 seconds after last operation.
Tap [On] to exit. [Off] Adjust video settings [DivX 1 Tap [Video]. 3 Tap Disable video view during drive. Enable video view during drive. View code for DivX registration. English 3 to exit. Adjust Bluetooth settings 2 1 Tap [Bluetooth]. 2 Tap an option repeatedly to select: Tap an option repeatedly to select: Video Options settings [Aspect [Full] ratio] [Normal] [Video [Auto] input] Description For widescreen display. For normal display. The correct format is set automatically.
[Pairing code] 3 Tap View code for pairing the unit with other Bluetooth devices. Português [Off] [Disc menu] to exit. [ࡩᇓ໗] [ْᇓ໗] Español Português Adjust language settings 1 [English] Turn off subtitle language display. Select DVD menu language. Options available depend on DVD disc. Tap [Language]. 3 Tap to exit.
1 10 Others English Adjust DVD rating Tap [DVD rating]. Listen to other devices You can connect an external audio/video device to the unit. 1 2 Connect the device to the unit with the supplied AV cable. Tap an option repeatedly to select: DVD rating Options Description [Set Set password to password] restrict the play of discs. The default password is 0000. [Rating [Kid Acceptable for level] safe] children. [G] Acceptable for general viewers. [PG] Parental guidance suggested.
2 3 Check the electric connection. 4 Replace the fuse. Buy a fuse that matches the voltage of the damaged fuse (15A) Tip • When the unit is reset, all the settings remain unchanged. Remove the unit To repair, replace fuse, or replace the unit, remove it from the dashboard. 1 2 Screw off the four (4) screws on the left/ right side of the unit. Pull the unit out from the dashboard. Replace fuse If there is no power, the fuse may be damaged and need to be replaced.
Note • Product information is subject to change Tuner Frequency range - FM 87.5 - 108.0 MHz (Europe) Frequency range 522 - 1620 KHz AM(MW) (Europe) Usable sensitivity - FM 5 uV Usable sensitivity 50 uV AM (MW) English 11 Product information without prior notice.
Supported formats: • USB or memory file format: FAT16, FAT32 • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA v9 or earlier • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.
Image flashes or distorted • Video DVD settings do not match with the DVD. Adjust video DVD settings. • Video connection is improper. Check the connections. • • Noise in broadcasts. • Signals are too weak. Select other stations with stronger signals. • Check the connection of the car antenna. • Change broadcast from stereo to mono. The paired mobile phone connects and disconnects constantly. • The Bluetooth reception is poor.
13 Glossary B Bite rate The max data transfer through the USB port. Bluetooth Bluetooth® is a short-rang wireless protocol that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. The name refers to a Viking King who unified Denmark. Operate at 2.4GHz. For more information, see www.bluetooth.com. M MMC MultimediaCard. A type of memory card with a flash memory. MP3 A file format with a sound data compression system.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. CID3687_00_UM_V1.
