Register your product and get support at www.philips.
1 Important Safety Notice Introduction What’s in the box Overview of the main unit 2 Get started Install the car audio Turn on Adjust screen Set date and time 3 Use map Upgrade the map 4 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station 5 Play Load discs Connect USB device Insert SD/MMC card Play/Pause Search for a folder Search within a title/folder Repeat Repeat a section Random play Select audio language Select audio mode Select subtitle language Rotate p
1 Important Notice Safety 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This unit is designed for negative ground (earth) 12 V DC operation only.
What’s in the box Check and identify the contents of your package: a b c d e f g h i j Introduction With the car entertainment system, you can Quickly found routine through the navigation system And you can also enjoy: Audio/video/JPEG pictures from DVD, VCD or CD USB devices SD/SDHC/MMC cards External devices FM or AM (MW) radio Audio from Bluetooth-enabled devices Besides, you can make/receive phone calls with Bluetooth-enabled devices.
Overview of the main unit f g h i j k l a m b n c o d p e q r a (Green) Answer phone. Dial number. (Red) Terminate call. b MENU Return to the home menu. c NAVI Enter the GPS navigation system or exit. d SRC Select source. e SD/SDHC/MMC card slot f Built-in microphone for phone calls. g /MUTE/VOL Turn the unit on or off. Mute or unmute audio. Adjust volume. 6 EN h RESET Reset the unit when it hangs up. i Eject disc.
E n gl i sh n DISP/ / Adjust screen brightness/contrast/ color. Turn on/off the screen display. Adjust the display aspect ratio. o SEARCH 6HDUFK IRU VSHFLÀF ÀOHV Change waveband. p FM/AM Switch to the FM/AM source. q USB socket. r AV IN External equipment audio/video in socket.
2 Get started Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Install the car audio These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer.
Connect to 1 Telephone mute 2 Red wire The +12V power terminal which is live in the accessory (ACC) position of the ignition switch If there is no accessory position, connect to the +12V car battery terminal that is always live. Be sure to connect the black ground (earth) lead to a metal surface of the car ÀUVW 3 Orange wire Lumination switch 4 Black wire A metal surface of the car First connect the black ground (earth) lead, then connect the yellow and red power supply leads.
Blue Black Touch controller Rear screen Yellow Red White Connect GPS antenna To receive signal from satellites, connect the supplied GPS antenna to your car and the system.
Stick the other end of the GPS antenna to a metal surface of the car. E n gl i sh 2 Connect GPS antenna If your car has built-in radio antenna, connect it to the radio antenna of the system for better radio signal. 1 Connect the radio antenna to the car antenna. 4 5 Attach the trim plate. Reconnect the negative terminal of the car battery. Turn on Caution Risk of road accidents! Never watch video or adjust settings while you drive.
Set date Adjust screen To adjust screen brightness/contrast/color 1 2 3 4 Press DISP/ / Press or 1 2 to show the manual. Touch [Date]. Touch on the displayed date information. » A submenu is displayed. to select an item. Touch / to adjust the value. Press DISP/ / WR FRQÀUP To turn on/off the screen, press and hold DISP/ / . Set date and time 1 Touch the upper left corner to display main menu. 3 Touch or Set clock mode 1 to set year, month and day. Touch [Clock mode].
Note You may need to upgrade the map before using it (see “Upgrade the map” section) 1 Touch the upper left corner to display home menu. 2 Touch [Navigation]. » The navigation menu is displayed in a few seconds. 3 Refer to the map manual (in Chinese) to operate the navigation tool. Upgrade the map E n gl i sh 3 Use map 1 2 Turn off the car audio system. 3 Take out the card and bring it to the authorized service center for upgrade. Press the map card until you hear a click sound.
4 Listen to radio 4 Touch the numbers to enter frequency. Tune to a radio station 1 Touch the upper left corner to display home menu. 2 Touch [Radio]. » Band and frequency information is displayed. 5 Touch to clear the last entered number. Touch to clear all the entered numbers. Touch WR FRQÀUP » The radio station is broadcast.
You can store up to 6 stations in each band. Store stations manually 1 2 3 4 Tune to a preset station 1 2 3 E n gl i sh Store radio stations in memory Touch [Radio]. Select band. Touch one of the preset channels (01 to 06) to select a preset station. Tune to the station. Touch . Touch [Save]. Touch one of the channels 01 to 06 to save the select band. Store stations automatically You can search for a station with intro search, which broadcasts a 10-second preview of each detected radio station.
5 Play Connect USB device Note Load discs Ensure that the device contains playable content. You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW VCD Audio CD, CD-R, CD-RW 1 Open the USB door. 2 Insert your USB device to the USB socket. » Play starts automatically. Note Ensure that the disc contains playable content. 1 Insert the disc into the disc slot with label side facing up. » Play starts automatically.
1 2 Press SRC to switch to another source. Remove the USB device. Play/Pause 1 E n gl i sh Remove the USB device Once a disc, USB or SD/MMC card is inserted, play starts automatically. Insert SD/MMC card Note Ensure that the device contains playable content. The unit supports SDHC card. 1 2 For DVD movie, if a menu appears, press TUNE/ SELECT to start play. Open the SD/MMC card cover. Insert the SD/MMC card into the SD/MMC card slot. » Play starts automatically. 2 To pause, touch .
)RU DXGLR ÀOHV 1 2 Touch Touch to return to playlist menu. to display all available audio folders. » )RU YLGHR ÀOHV WRXFK ÀUVW WKHQ WRXFK . 3 3 Touch a folder, then touch VHOHFW D ÀOH or to 7RXFK WKH QXPEHUV WR HQWHU FKDSWHU ÀOH number, then touch . To clear the previous input, touch . To clear all input, touch . 4 Touch to start play. )RU SLFWXUH ÀOHV 1 2 3 4 Touch Repeat to return to playlist menu. Touch to display all available picture folders.
1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to select: [Repeat]: play the current track repeatedly. [Repeat off]: cancel repeat play. )RU 03 :0$ ÀOHV: 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to select: [Repeat]: play the current track repeatedly. [Repeat folder]: play all the tracks in the current folder repeatedly. [Repeat off]: cancel repeat play.
Select subtitle language For DVD or DivX discs that contain two or more subtitle languages. 1 2 3 During play, touch anywhere except for the upper left corner to display menu on the screen, if necessary. Touch 3 Rotate pictures 1 When you view pictures, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch repeatedly to rotate the picture. Zoom You can zoom in pictures for a close view.
4 Enter default password “0000”. » If pairing succeeds. phone call record is displayed. You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Disconnect Bluetooth devices Pair the Bluetooth-enabled devices To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to eight devices.
5 Touch or to search for phone number from the following list: Switch phone call to the mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. 1 [Missed calls] [Received calls] [Dialed calls] [Phone book] [Sim phone book] [Local phone book] Or touch to dial number directly, then touch to dial. Receive call By default, all incoming calls are received automatically. 1 2 If there is incoming call, [Incoming call...
E n gl i sh Adjust Bluetooth settings You can change below Bluetooth settings: [Bluetooth]: to turn on or off “Bluetooth” function [Auto connect]: to turn on or off “Auto connect” function [Auto answer]: to turn on or off “Auto answer” function [Pairing code]: to set paring code [Phone Book Sync]: to synchronize phone book 1 In Bluetooth menu, touch . » The option menu is displayed. 2 Touch on the selected option to change the setting.
7 Adjust sound Adjust volume 1 2 Turn /MUTE/VOL button clockwise to increase volume. Turn /MUTE/VOL button anti-clockwise to reduce volume. 3 4 Touch 5 Touch to restore the above settings into default settings. 6 Press Mute 1 During play, press /MUTE/VOL. To turn the sound back on, press MUTE/VOL again. / Tip You can also turn off sound by touching on the screen. or to select an EQ. Touch or to adjust below settings: [Bass]bass range: -14 to +14. [Mid]middle range: -14 to +14.
Touch or to select subwoofer volume. [Sub] subwoofer volume: 0 to 24. 4 Touch F, R, L, or R to adjust fader/balance value. [Fade]fader range: +24 to -24. (F = front speaker, R = rear speaker) [Balance] balance range: -24 to +24. (L = left speaker, R = right speaker) 5 Touch E n gl i sh 3 to exit. Set Dynamic Bass Boost (DBB) 1 Touch to toggle between the settings. [DBB] on: The icon is illuminated. [DBB] off (default): The icon is gray.
8 Adjust settings Display system setup menu 1 2 Touch the upper left corner to display main menu. Touch in the middle right side of the screen. » The second main menu is displayed. 2 3 Touch or to highlight a setting. Touch on the option to display/select an option. General settings [Radio region] [Radio range] Options Description [USA], [S.Amer-1], [Arabia], [China], [S.Amer-2], [Europe], [Korea], [OIRT] [Local] Select one that matches your location.
[Red] [Blue] [Beep] [On] [Off] [Calibration] 4 Press Button backlight turns red. Button backlight turns blue. Turn on the beep sound. Each time you press a button, the unit beeps. Turn off the beep sound. Calibrate the touch screen. to exit. Adjust sound settings 1 Touch [Sound]. 2 Touch an option repeatedly to select: Sound Options Description settings [Sub [On] Turn on the subwoofer. woofer] [Off] Turn off the subwoofer. [Sub [80Hz] 6HOHFW VXEZRRIHU ÀOWHU woofer criteria.
2 Touch an option repeatedly to select: Video settings [Aspect ratio] Options Description For widescreen display. [Normal] For normal display. [Video [Auto] The correct format input] is set automatically. Select this option if you are not sure which format should be selected. [NTSC] Used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries.
Adjust volume settings 1 You can set different volume for different modes. 2 Touch [Language]. Touch [Volume]. » The volume setting sub-menu is displayed. 2 Touch on a source. [DVD] [USB] [SDHC] [Radio] [Bluetooth] [AV-IN1] [AV-IN2] [CDC] [TV] [Navigation] 3 Touch or to assign value: 0 to 12. » When switches to the source, the volume increases automatically.
2 Touch an option repeatedly to select: DVD rating Options Description [Set Set password to password] restrict the play of discs. The default password is 0000. [Rating [Kid Acceptable for level] safe] children. [G] Acceptable for general viewers. [PG] Parental guidance suggested. [PG-13] Unsuitable for children under age 13. [PG-R] Recommend parents to restrict children under 17 to view. [R] Restricted. Recommend parent to guide children under 17 to view. [NC-17] Unsuitable for children under age 17.
9 Others E n gl i sh Reset When the unit hangs up, you can reset it. Listen to other devices 1 Press RESET with a ball-point pen or similar tool. You can connect an external audio/video device to the unit. 1 Connect the car audio to the device with the supplied AV cable. AV IN Tip When the unit is reset, all the settings remain unchanged. Remove the unit 2 Touch the upper left corner to display the main menu. 3 4 Touch [AV-IN1].
1 2 Pull the unit out from the dashboard. Screw off the screws on the mounting brackets and the unit. Replace fuse If there is no power, the fuse may be damaged and need to be replaced. 1 2 3 Take out the unit from dashboard. 4 Replace the fuse. Check the electric connection. Buy a fuse that matches the voltage of the damaged fuse (15A) If the fuse gets damaged immediately after it has been replaced, there may be an internal malfunction. In such case, consult your Philips dealer.
Note Product information is subject to change without prior notice. Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Subwoofer output voltage Aux-in level Dimensions (W x H x D) - Panel - Body Weight (main unit) 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 channels 24 W x 4 channels (4 10% T.H.D.) 2.0 V ( CD play mode; 1 kHz, 0 dB, 10 k load) 2.0 V (CD play mode, 61 Hz, 0 dB, 10 k load) 500 mV 294 x 146 x 40 mm 178 x 145 x 100 mm 2.
Compatible USB devices: 86% ÁDVK PHPRU\ 86% RU USB1.1) 86% ÁDVK SOD\HUV 86% RU USB1.1) memory cards (SD / MMC / SDHC) Supported formats: 86% RU PHPRU\ ÀOH IRUPDW FAT16, FAT32 MP3 bit rate (data rate): 32-320 Kbps and variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.
Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power Car engine has not been started. Start the car engine.
The paired mobile phone connects and disconnects constantly. The Bluetooth reception is poor. Move the mobile phone closer to the system or remove any obstacle between the mobile phone and the system. Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the system. For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system.
S B SD Secure Digital. A type of memory card with a ÁDVK PHPRU\ Bite rate The max data transfer through the USB port. Bluetooth %OXHWRRWK LV D VKRUW UDQJ ZLUHOHVV SURWRFRO that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. 7KH QDPH UHIHUV WR D 9LNLQJ .LQJ ZKR XQLÀHG Denmark. Operate at 2.4GHz. For more information, see www.bluetooth.com. M MMC MultimediaCard.
Ҋࡵӯ Name of the Parts ಅ 3E Lead) ႹႹݡ༂ᇍࠋჱෑ Hazardous/toxic Substance ݪ+J M ercury) ᭢ &G cadm ium ) તࢰ ݒ &KURPLXP ځᝪ҈ 3%% ځᝪ҈ڟସ 3%'( +RXVLQJ শ O O O O O O '9' &' ORDGHU '9' &' ߩޝ X O O O O O /&' 3DQHO Ⴃस୍ђ X X O O O O /RXGVSHDNHUV ৻еרᅏ O O O O O O 3:%V تીђከ࣓ X O O O O O $FFHVVRULHV 5HPRWH FRQWURO FDEOHV ࣓ܚĥႌে౸ĩ تᅙྮĩआྮĦ X O O O O O %DWWHULHV LQ 5HPRWH &RQWURO =Q& ႌে౸ت՟ X O O O O O 2 Ҹභܠ
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. CID3680_93_UM_V1.
