Register your product and get support at www.philips.
1 Important Safety Notice 2 Your car audio system Introduction What’s in the box Overview of the main unit 3 Get started Install the car audio Turn on Set date and time Adjust screen 4 4 4 5 5 6 7 8 8 10 10 11 7 Play with Bluetooth device 19 Pair the Bluetooth-enabled devices Make a call Receive call Listen to music from Bluetooth device Adjust Bluetooth settings 8 Adjust sound 21 Adjust volume Mute Select preset equalizer Adjut fader/balance Set Dynamic Bass Boost (DBB) 21 21 21 22 22 9 Adjust
1 Important Notice Safety 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This unit is designed for negative ground (earth) 12 V DC operation only.
2 Your car audio system English Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
What’s in the box Check and identify the contents of your package: a b c d e f g h i j a Main unit b Trim plate c Power cable d AV out cable e CMMB cable f Audio cable g I/O wire h GPS antenna i Screen cleaning cloth j Printing material (include User manual, Quick start guide) 6 EN
m English Overview of the main unit a l b k c j i d h e g f a Disc slot b Eject disc c MAP Open the cover and insert/remove the GPS map card. d TUNE/ SELECT Skip to the previous or next title, chapter, or track. Search backward/forward at different speeds. &RQÀUP DQ HQWU\ RU VHOHFWLRQ Start, pause or resume play. e USB socket f Built-in microphone g DISP/ / Adjust screen brightness/contrast/ color. Turn on/off the screen display.
3 Get started Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Note on the power supply lead (yellow) When you connect other devices to this system, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices.
1 English Check the car’s wiring carefully, then do the other connections: Yellow Rear display Yellow Rear display Yellow Green Blue Radio antenna Yellow Black Red Radio antenna White Green Grey/black c Grey White/black Purple Green/black Brown/ black Brown/ black Gearbox Optional accessory Purple/black Blue/ white orange/ white d orange/ white White/ brown e Blue/ white Green/white Pink GPS antenna White Red Grey/black Green b Green/black Purple/black Purple Red White
2 Slide the unit into the dashboard until a click sound is heard. Turn on Caution Risk of road accidents! Never watch video or adjust settings while you drive. 3 1 Press to turn on the unit. » The available OSD (On-Screen Display) languages are displayed. 2 Touch a language to select. » The OSD language is changed to the selected language immediately. To turn off the unit, press Attach the trim plate. for 3 seconds. Set date and time 1 4 Reconnect the negative terminal of the car battery.
Touch [Time]. » The date/time setup menu is displayed. Set time 1 2 Touch [Time]. 3 Touch English 3 Touch on the displayed time. » A submenu is displayed. Set date 1 2 Touch [Date]. Touch on the displayed date information. » A submenu is displayed. or to set hour and minute. Tip When date/time is set, touch to return to main menu. Adjust screen 3 Touch or to set year, month and day. Set clock mode 1 Touch [Clock mode].
4 Use map Note You may need to upgrade the map before using it (see “Upgrade the map” section) 1 Touch the upper left corner to display home menu. 2 Touch [Navigation]. » The navigation menu is displayed in a few seconds. 3 Refer to the map manual (in Chinese) to operate the navigation tool. Tip You can press NAVI to enter/exit the navigation system. 12 EN Upgrade the map 1 2 Turn off the car audio system. 3 Take out the card and bring it to the authorized service center for upgrade.
4 Touch the numbers to enter frequency. English 5 Listen to radio Tune to a radio station 1 Touch the upper left corner to display home menu. 2 Touch [Radio]. » Band and frequency information is displayed. 5 Touch to clear the last entered number. Touch to clear all the entered numbers. Touch WR FRQÀUP » The radio station is broadcast.
3 4 Touch [Save]. Touch one of the channels 01 to 06 to save the select band. 6 Play Load discs You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW VCD Audio CD, CD-R, CD-RW Store stations automatically You can search for a station with intro search, which broadcasts a 10-second preview of each detected radio station. 1 2 3 Select band. Touch . Note Ensure that the disc contains playable content.
Note Play/Pause 1 English Connect USB device Once a disc or USB device is inserted, play starts automatically. Ensure that the device contains playable content. 1 2 Open the USB door. Insert the USB device to the USB socket. » Play starts automatically. For DVD movie, if a menu appears, press to start play. 2 To pause, touch . To resume play, touch again.
)RU DXGLR ÀOHV 1 2 Touch 2 to return to playlist menu. Touch . » The search screen is displayed. Touch to display all available audio folders. » )RU YLGHR ÀOHV WRXFK ÀUVW WKHQ touch . 3 Touch a folder, then touch VHOHFW D ÀOH 4 Touch or to 3 to start play. )RU SLFWXUH ÀOHV 1 2 Touch 7RXFK WKH QXPEHUV WR HQWHU FKDSWHU ÀOH number, then touch . To clear the previous input, touch . To clear all input, touch . to return to playlist menu.
Touch to select: [Repeat chapter]: play the current chapter repeatedly. [Repeat title]: play all chapters in the title repeatedly. [Repeat off]: cancel repeat play. 4 To exit A-B repeat mode, touch repeatedly until [Repeat A-B off] is displayed. English 3 Random play For VCD karaoke or audio CD: 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to select: [Repeat]: play the current track repeatedly.
Select subtitle language For DVD or DivX discs that contain two or more subtitle languages. 1 2 3 During play, touch anywhere except for the upper left corner to display menu on the screen, if necessary. Touch 3 Rotate pictures 1 When you view pictures, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch repeatedly to rotate the picture. Zoom You can zoom in pictures for a close view.
You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Pair the Bluetooth-enabled devices English 7 Play with Bluetooth device Disconnect Bluetooth devices 1 To disconnect one device, touch » (green) is displayed. (red). Tip The device will also be disconnected when the device is moved beyond the operational range.
5 Touch or to search for phone number from the following list: Switch phone call to the mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. 1 [Missed calls] [Received calls] [Dialed calls] [Phone book] [Sim phone book] [Local phone book] Or touch to dial number directly, then touch to dial. Receive call By default, all incoming calls are received automatically. 1 If there is incoming call, [Incoming call...
You can change below Bluetooth settings: [Bluetooth]: to turn on or off “Bluetooth” function [Auto connect]: to turn on or off “Auto connect” function [Auto answer]: to turn on or off “Auto answer” function [Pairing code]: to set paring code [Phone Book Sync]: to synchronize phone book 1 In Bluetooth menu, touch . » The option menu is displayed. 8 Adjust sound English Adjust Bluetooth settings Adjust volume 1 Turn clockwise to increase volume. Turn anti-clockwise to reduce volume.
2 3 4 Touch . » The current Equalizer setting is displayed. Touch or Touch to restore the above settings into default settings. 6 Press to exit. Adjut fader/balance You can also adjust the front and rear speaker balance, the left and right speaker balance, and subwoofer settings. Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 22 Touch . Touch » Below options are displayed: EN Touch or to select subwoofer volume. [Sub] subwoofer volume: 0 to 24.
Display system setup menu 1 2 Touch the upper left corner to display main menu. General Options settings [Radio region] [USA], [S.Amer-1], [Arabia], [China], [S.Amer-2], [Europe], [Korea], [OIRT] [Radio range] [Local] Touch [Settings]. » The settings menu is displayed. [Blackout] Adjust general settings 1 Touch [General], if necessary. 2 3 Touch or to highlight a setting. Touch on the option to display/select an option.
General settings [Beep] Options Description [On] Turn on the beep sound. Each time you press a button, the unit beeps. Turn off the beep sound. Turn background color to blue. Turn background color to black. Turn background color to red. Select F1 picture as wall paper. Calibrate the touch screen. [Off] [WallPaper] [Blue] [Black] [Red] [F1] [Calibration] 4 Press Sound Options Description settings [Sub [On] Turn on the subwoofer. woofer] [Off] Turn off the subwoofer.
Touch an option repeatedly to select: Video settings [Aspect ratio] Options [Full] 3 Press to exit. English 2 Description For widescreen display. [Normal] For normal display. [Video [Auto] The correct format input] is set automatically. Select this option if you are not sure which format should be selected. [NTSC] Used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries.
Adjust language settings Adjust volume settings 1 You can set different volume for different modes. 2 Touch [Language]. 1 Touch [Volume]. » The volume setting sub-menu is displayed. 2 Touch on a source. [DVD] [USB] [SDHC] [Radio] [Bluetooth] [AV-IN1] [AV-IN2] [CDC] [TV] [Navigation] 3 Touch or to assign value: 0 to 12. » When switches to the source, the volume increases automatically.
Touch an option repeatedly to select: DVD rating Options [Set password] [Load factory] Description Set password to restrict the play of discs. The default password is 0000. [Kid safe] Acceptable for children. [G] Acceptable for general viewers. [PG] Parental guidance suggested. [PG-13] Unsuitable for children under age 13. [PG-R] Recommend parents to restrict children under 17 to view. [R] Restricted. Recommend parent to guide children under 17 to view. [NC-17] Unsuitable for children under age 17.
11 Product information Note Product information is subject to change without prior notice. General Power supply Replace fuse If there is no power, the fuse may be damaged and need to be replaced. 1 2 3 Take out the unit from dashboard. 4 Replace the fuse. Check the electric connection. Buy a fuse that matches the voltage of the damaged fuse (15A).
Frequency range - FM 87.5 - 108.0 MHz (Europe) Frequency range 522 - 1620 KHz AM (MW) (Europe) Usable sensitivity - FM 5 uV Usable sensitivity 50 uV AM (MW) LCD Screen size Display resolution Contrast ratio Brightness 6.5 inches (16:9) 800 x 480 dots 300 350 cd/m2 Bluetooth Communication Bluetooth Standard system version 2.0 Output Bluetooth Standard Power Class 2 Maximum Line of sight approx. 8m communication range Frequency band 2.4 GHz band (2.4000 GHz - 2.
Supported video formats: DVD Divx Home theater MP4 Xvid Note To ensure a better playback, bit rate of 4.5 Mbps is recommended. 12 Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome).
Noise in broadcasts Signals are too weak. Select other stations with stronger signals. Check the connection of the car antenna. Change broadcast from stereo to mono. Preset stations lost Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live. Fuse is broken The Fuse type is incorrect. Replace it with a 15A fuse. Speaker wire or power wire is grounded. Check the connections. The system is already connected with another Bluetooth-enabled device.
13 Glossary B Bite rate The max data transfer through the USB port. Bluetooth %OXHWRRWK LV D VKRUW UDQJ ZLUHOHVV SURWRFRO that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. 7KH QDPH UHIHUV WR D 9LNLQJ .LQJ ZKR XQLÀHG Denmark. Operate at 2.4GHz. For more information, see www.bluetooth.com. M MP3 $ ÀOH IRUPDW ZLWK D VRXQG GDWD FRPSUHVVLRQ system.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: CID3280_93_UM_V2.
