Register your product and get support at www.philips.com/welcome CID2780 User manual CID2780_98_UM_V1.1.
1 Important Safety Notice 2 Your in-car entertainment system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Install the car audio Install remote control battery Turn on Set date and time 4 Play audio/video/picture Load discs Connect USB device Insert SD/MMC card Play/Pause Browse Video options Audio options View photo 5 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station Play with RDS Adjust Bluetooth set
1 Important Safety Notice 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are those of their respective owners. This apparatus includes this label: Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
2 Your in-car entertainment system b a d c Congratulations on your purchase, and = " > support that Philips offers, register your product at www.philips.com/welcome.
l k a Eng l i s h Overview of the main unit j i b h g c f d a e /MUTE Turn the unit on or off. Mute or unmute. i Adjust display brightness. b VOL -/+ Adjust volume. j NAVI Enter the GPS navigation system or exit. c k USB socket d AV IN External audio/video socket. Eject disc. l Disc slot e Remote control sensor Detects signals from the remote control. When using the remote control, point it directly at the IR sensor.
Overview of the remote control g AUDIO Select audio language or audio channel. h BAND Select AM or FM band. a | b { i MUSIC Switch to music playing mode. z j GOTO Select track/chapter. c d e y f k x g h w i j k v l m s u t (green) Answer phone. Dial number. l DVD MENU Return to DVD main menu. m Numeric keypad n n SHUFF Turn random play on or off. o p o REPEAT Select repeat play mode. q r p SUBTITLE Select DVD or DivX subtitle language.
3 Get started Eng l i s h x PHOTO/ZOOM Zoom in or out a picture/video image. y F/R Switch to front/rear control mode. z Navigation buttons / Skip to the previous/next preset station. Skip to the previous/next folder. Search backward/forward for DVD video. Move cursor up/down. / Skip to the previous/next track. Move cursor to left/right. Press the navigation button down Start play or pause.
Connect wires c ѣ㖤丩仇䗉࠰ CENTER MZ-TFT MIC VIDEO OUT 2 FM ANT REAR OUT/R ਦ丩仇䗉࠰ REAR OUT/L c P.ANT ਦᐜ丩仇䗉࠰ 10 EN CID2780_98_UM_V1.1.
Ensure that the car dashboard opening is within these measurements: Eng l i s h 2 mm 3.5 187 mm 116 mm Check the car's wiring carefully, then make the connections as illustrated (see 'Wiring Diagram'). Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another.
Install remote control battery 3 Tap anywhere on the screen to save. » The available OSD languages are displayed. 4 Tap a language. » The OSD language is changed to the selected language immediately. To turn off the unit, press Caution Risk of explosion! Keep battery away from heat, [ # Note $ # \ = not to be used for a long time. Battery contain chemical substances. It should be disposed of properly.
Tap . » The date/time setup menu is displayed. 4 Play audio/ video/picture Eng l i s h 4 Load discs 5 6 7 Tap on [Date], [Clock mode] or [Time]. Tap or to set date/time. When date/time is set, tap to main menu. to return You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW VCD Audio CD, CD-R, CD-RW 1 Insert the disc into the disc slot with label side facing up. » The disc starts playing automatically. 2 To remove the disc, press the button.
Connect USB device Note Ensure that the device contains playable content. For detail information on supported video format, see "Product Information" chapter. 1 2 " _<` \ Insert the USB device into the USB slot . » Remove the SD/MMC card 1 2 Switch to another source. 3 Remove the SD or MMC card. Press the card until you hear a click sound. » The card is now disengaged.
Tap one of the icons below to select ? } : To display all available audio folders/track. : To display all available video ? : To display all available picture ? Tip Eng l i s h 2 You can also press AUDIO on the remote control repeatedly to change audio language. Select subtitle language For DVD or DivX discs that contain two or more subtitle languages. 3 <= = ? = = browse through the list. 4 Tap on the name to start play.
4 5 Tap repeatedly to select: [Enter chapter number:] [Enter title number:] [Enter time:] Tap the numbers, then tap . To clear the previous input, tap To clear all input, tap . Tip You can also press REPEAT on the remote control to select repeated play mode. . Repeat a section ~ # 1 During play, tap anywhere except for the upper left corner to display menu on the screen. 2 3 Tap 4 to display the 2nd menu.
Eng l i s h 2 Tap the numbers to enter track number, then tap OK. To clear the previous input, tap . To clear all input, tap . 2 Drag the bar downward to view all pictures. 3 Tap on a picture to view it in full screen. Random play ~ ? 1 During play, tap repeatedly to turn random play on or off. (red) : start random play. (gray): cancel random play.
5 Listen to radio Tune to a radio station 1 2 Tap 4 Tap the numbers to enter frequency. Tap to clear the last entered number. Tap to clear all the entered numbers. 5 Tap OK » The radio station is broadcast. to display home menu. Tap . » Band and frequency information is displayed. Select radio range Before you start to search for radio stations, you can select radio range.
1 2 3 4 5 Tune to the station by tapping Tap or Eng l i s h Store stations manually . . <= = [Save] is displayed. Tap [Save]. Tap one of the channels 01 to 06 to save the select band. Play with RDS The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, an RDS icon and the station name are displayed.
[AF] (Alternate Frequency): If the radio signal come from the current station is poor, you can turn AF on to let the system searching for another station with stronger signal but with the same program [TA] ; } @ = during enjoying music, you can turn on ; announcement, the system switches to tuner mode and begins to broadcast announcement is over, it retu
CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM Children’s programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm 6 Use navigation system Eng l i s h 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Insert map card Note Navigation map card is not included in the packaging of the car entertainment system. 1 2 Open the card door. 3 Close the card door.
3 Refer to the user manual of the navigation map to operate the navigation tool. Upgrade the map 1 2 3 Exit navigation system. 4 Pull out the map card and bring it to the authorized service center for upgrade. 5 Insert the upgraded map card back into the card slot. 6 Turn on the car audio. » The map upgrades in a few minutes. 22 EN Open the card cover. Press on the map card until you hear a click sound. CID2780_98_UM_V1.1.
Note The operational range between this unit and a You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Adjust microphone position For better sound quality in make/receive phone call through Bluetooth, place the microphone near the mouth. 1 Make sure the supplied microphone is connected to the car audio system. (See "Connect wires" section). 2 Place the microphone at a proper location.
Tip If you do not want to reconnect the device to the unit automatically, tap >[Auto connect], then select [Off]. For details, see the "Adjust Bluetooth settings" section. 3 4 When the names of the available Bluetooth devices are displayed on the screen of the car audio, tap on the preferred one. » A message reminding you to enter password is sent to your Bluetooth device. When the message is displayed on your Bluetooth device, enter the default password “0000”. » Pairing starts.
During the conversation, if you do not want your conversation being heard, you can tap call to the mobile phone. You can also tap directly, then tap to dial number to start calling. Adjust Bluetooth settings 1 If connection failed, tap to re-dial 7 When conversation ends, tap In the Bluetooth menu, tap . » The option menu is displayed. . . Receive call [Bluetooth]: to turn the "Bluetooth" function on or off. [Auto connect]: to turn the "Auto connect" function on or off.
Listen to music from Bluetooth device If the connected Bluetooth device supports ; # ; & " ;&" you can listen to the music stored on the device through the unit. If the device also supports ; $ % " ;$%" its remote control to play music stored on the device. 1 2 3 4 5 Pair the phone with the unit. Tap to return to home menu. Tap tap Tap . . to start play.
To skip backward/forward, tap / . To search for a track, tap . » Tracks sorted by genre is displayed. 9 Adjust sound Eng l i s h 3 4 Adjust volume 1 5 < = upward/downward to search for preferred tracks. Charge the iPod/iPhone When the iPod/iPhone is connected to the car audio system, the iPod/iPhone begins to charge. Press Press to increase volume. to reduce volume. Mute 1 2 During play, press . To turn the sound back on, press again.
[Flat] [Pop] 3 Adjust EQ settings by tapping on the screen. 4 @ = sound settings, tap to restore default settings. 5 Tap to exit. 10 Adjust settings Display system setup menu 1 Tap 2 Tap . » The settings menu is displayed. > to display the full menu. Turn FullSound on/off Philips FullSound restores the audio details that is lost in music compression.
[Local] Only stations with strong signals can be broadcast. [Distance] Stations with strong and weak signals can be broadcast. [Blackout] [off] Never turn on the screen saver. [10s] Turn on the screen saver automatically 10 seconds after last operation. [20s] Turn on the screen saver automatically 20 seconds after last operation. [Dimmer [Night] Select this mode at Mode] night. [Dark] Select this mode at dusk. [Normal] Set screen dimmer to normal mode. [Bright] Select this mode in bright environment.
Select listening zone Philips’ innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the artist is intended to create. You can switch the music listening zone from driver to passengers for the best speaker sound settings in car. 1 2 Tap (Settings) > [Video input] [Auto] [NTSC] (Sound). [PAL] <= = [Listening Zone] and tap on it. » The listening zone screen is displayed.
[On] [Off] [Auto answer] [On] [Off] [Pairing code] If the pre-paired device is within effective range, the system re-connects to pre-paired device automatically. Need to re-connect manually. Answer paired phone call automatically. Answer phone call manually. Set code for pairing the car entertainment system with other Bluetooth devices. The default code is 0000. Adjust volume settings Adjust language settings 1 Tap 2 Tap on a setting, then tap select an option.
[Disc menu] [English] [R] Select DVD menu language. Options available depends on the DVD. [ኘͧ ˊஔ] [ጆͧ ˊஔ] [NC-17] [Adult] Adjust DVD rating [DVD 5.1 Channel] [On] [Off] 1 Tap . [Load factory] Restricted. Shouldn't be viewed by children under 17 without parental consent. Unsuitable for children under age 17. Acceptable for adults only. Turn on DVD 5.1 channel. Disable DVD 5.1 channel. Restore to default settings. Restrict access 2 Tap a a setting to make an adjustment.
Adjust brightness To adjust screen brightness, press repeatedly. 3 Tap on a key and then tap allocate key function. 4 Tap . » You are requested to press the matching button on the steering wheel for one second. 5 Follow the instructions as shown on the screen. 6 Repeat steps above to allocate other buttons. button or to Eng l i s h 11 Others Tip You can also use the / button and or button on the remote control to adjust screen brightness.
Tip Listen to other devices When the unit is reset, all the settings remain unchanged. You can connect an external audio/video device to the car audio system. 1 Connect the car audio to the device with the supplied AV cable. Replace fuse AV IN If there is no power, the fuse may be damaged and need to be replaced. 2 3 4 Tap to display the main menu. Tap [AV-IN1]. 1 2 3 Take out the unit from dashboard. 4 Replace the fuse. Check the electric connection.
Note Product information is subject to change without prior notice. Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Subwoofer output voltage Aux-in level Dimensions (W x H x D) Weight (main unit) Operating temperature range Frequency range - FM Frequency range AM(MW) Usable sensitivity - FM Usable sensitivity - AM (MW) 87.5 - 108.
Supported video formats File extension: .avi, .mp4 Compatible Video Codec: .avi: MPEG-4 SP/ASP; H.263, H.264; XVID , DIVX 4/5/6 .mp4: MPEG-4 SP/ASP; H.263, H.264; Compatible Audio Codec: .avi: MPEG-1 Layer 1, 2, 3; AC-3 (Downmix), WMA Pro (stereo); WMA 9 Standard .
Disc rating exceeds the restriction setting. Change the rating settings to lower one. Disc region code is not compatible with the unit. Use disc with proper region code. Eng l i s h 13 Troubleshooting Warning Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.
About the Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. The device cannot be used with the system to play music. The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. # required for the system.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. CID2780_98_UM_V1.1 CID2780_98_UM_V1.1.
