Register your product and get support at www.philips.
6 Play with Bluetooth device 1 Important 4 Safety Notice 4 4 2 Your in-car entertainment system Introduction What’s in the box Overview of the main unit Overview of the remote control 6 6 6 7 8 24 Pair the Bluetooth-enabled devices Make a call Receive call Listen to music from Bluetooth device Adjust Bluetooth settings 7 Use navigation system 27 Insert map card Use map Upgrade the map 27 27 27 8 Adjust sound 3 Get started Install the car audio Install remote control battery Turn on Set date and
1 Important Safety 4 Read and understand all instructions before you use the apparatus. If damage + the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This unit is designed for negative ground (earth) 12 V DC operation only.
This apparatus includes this label: Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to ] =^ polystyrene foam (buffer) and polyethylene $ ^ Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of " = old equipment.
2 Your in-car entertainment system a Main unit b Trim plate c Remote control d AV out cable e Control/Camera wire * + # _ ' # at www.philips.com/welcome.
E n gl i s h Overview of the main unit j k a b c d e f i g h a Eject disc. b Remote control sensor Detects signals from the remote control. When using the remote sensor. c NAVI Enter the GPS navigation system or exit. d /MUTE/VOL -/+ Turn the unit on or off. Turn mute on or off. Adjust volume. f AV IN External equipment audio/video in socket. g USB socket h RESET Reset the unit when it hangs up.
e EQ Access audio setting menu. Overview of the remote control f a | b { c d z e y f x g h Mute or unmute audio. g AUDIO Select audio language or audio channel. h BAND Select AM or FM band. i MUSIC Switch to music playing mode. i j k v j GOTO Select track/chapter. u t k l m s w n (green) Answer phone. Dial number. l DVD MENU Return to DVD main menu. o m Numeric keypad p n SHUFF Turn random play on or off. q r o REPEAT Select repeat play mode.
Start play or pause. * w VIDEO/ANGLE Select a difference angle/version of the current DVD scene. x PHOTO/ZOOM Zoom in or out a picture/video image. y F/R Switch to front/rear control mode. z Navigation buttons / Skip to the previous/next preset station. Skip to the previous/next folder. Search backward/forward for DVD video. Move cursor up/down. Skip to the previous/next track. Move cursor to left/right. Press the navigation button down Start play or pause.
Note on the power supply lead (yellow) When you connect other devices to this circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another.
2 Connect to Left speaker (Rear) E n gl i s h Connector 7 Green and green/black wires 8 White and white/black wires 9 Gray and gray/black wires 10 Purple and purple/black wires Left speaker (Front) Right speaker (Front) Right speaker (Rear) Connect the other end of the two ISO connectors to the car audio system.
] Touch controller Контроллер сенс. управления ВИДЕОВЫХОД 2 VIDEO OUT 2 Rear screen Задний экран САБВУФ. Задний экран Red / Красный White / Белый ЗАДНИЙ Л Yellow / Желтый Red / Красный ЗАДНИЙ П White / Белый AV-система ПЕРЕДН. П ЗАДНИЙ ВИДЕОВЫХОД Red / Красный ПЕРЕДН. Л Беспроводные наушники ЗАДНИЙ ВЫХОД/П White /Белый ЗАДНИЙ ВЫХОД/Л Connect GPS antenna ' $ supplied GPS antenna to your car and the system.
Connect radio antenna 2 $ bare wires do not touch each other. Ensure that car dashboard opening is within these measurements: it to the radio antenna of the system for better radio signal. 1 mm 3.5 Connect the radio antenna to the car antenna.
4 Attach the trim plate. Turn on Caution Risk of road accidents! Never watch video or adjust settings while you drive. 5 Reconnect the negative terminal of the car battery. 1 Press to turn on the unit. » The available OSD (On-Screen Display) languages are displayed. 2 ' + » The OSD language is changed to the selected language immediately.
3 4 Tap in the middle right side of the screen. » The second main menu is displayed. 2 Tap on [12Hr] or [24Hr] to select clock mode. Set time 1 2 Tap [Time]. 3 Tap Tap on the displayed time. » A submenu is displayed. Tap [Settings]. Tap [Time]. » The date/time setup menu is displayed. or to set hour and minute. Tip < Q tap to return to main menu. Set date 1 2 Tap [Date]. 3 Tap Tap on the displayed date information. » A submenu is displayed.
4 Play Note You can play DVD disc with the following region code: Load discs Region code $ the following discs: %,% $ %,% %,% < VCD [ *% *% *% < Country Russia Connect USB device Note Ensure that the disc contains playable content. Note 1 Insert the disc into the disc slot with label side facing up. » Play starts automatically. Ensure that the device contains playable content. 1 Open the USB door.
E n gl i s h Remove the SD/MMC card Remove the USB device 1 Press SOURCE to switch to another source. 1 Press SOURCE to switch to another source. 2 2 Press the card until you hear a click sound. » The card is now disengaged. Remove the USB device. 3 Remove the SD or MMC card. Insert USB or SD/MMC card Note Play/Pause 1 ; ~ %Q* Ensure that the device contains playable content. The unit supports SDHC card.
Skip/search 1 Tap to return to playlist menu. 2 Tap one of below icons to select folder/ 3 ' Q . ' $ . ' . ] Repeat one/all % modes. For DVD/VCD movie disc: 3 4 1 Tap anywhere except for the upper left necessary.
1 Tap to select: -1: play the current track repeatedly. -Folder: play all the tracks in the current folder repeatedly. (in grey color): cancel repeat play. Tip You can also press REPEAT on the remote control to select repeated play mode. Select audio language For video discs that contain two or more audio channels. 1 % + = upper left corner to display menu on the 2 3 Tap to display the 2nd menu. Tap repeatedly.
Change view angle %,% as scenes recorded from different camera %,% available alternate scenes. 1 % + = upper left corner to display menu on the 2 Press VIDEOANGLE repeatedly on the remote control. » The view angle is changed. 3 Tip ' @ Q $ PHOTOZOOM on the remote control.
5 Listen to radio 5 Tune to a radio station 1 Tap to display home menu. 2 Tap [Radio]. Select radio range » Band and frequency information is displayed. 3 Tap FM or AM to select band: FM band options: FM1, FM2, FM3 AM band options: AM1, AM2 4 ~ or to tune to a radio station by step. Tap or for over 1 second to tune to a radio station automatically. Tune by frequency 1 2 3 4 E n gl i s h Tap » The radio station is broadcast.
» List of available program type is displayed. Store stations automatically + which broadcasts a 10-second preview of each detected radio station. 1 2 3 Select band. Tap . Tap [Search]. » Auto search starts. The six strongest stations of the selected band are saved in preset channels 1-6 automatically. Tune to a preset station 1 Tap [Radio]. 2 Select band. 3 Tap one of the preset channels (01 to 06) to select a preset station.
21 22 23 24 25 26 27 28 29 30 31 32 Program type Religion Phone In Travel Leisure Jazz Country Nation M Oldies Folk M Document Test Alarm Description Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm Select alternate frequencies You can turn on or off below RDS functions: [AF] (Alternate If the radio signal come Frequency) from the current station is [AF] function to let the unit searches for another sta
[CT] (clock time) [On] [Off] [PS] (Program [On] Service) [Off] 1 Tap Turn on the RDS clock. Time shown on the unit synchronize with that on the RDS station. Note: The accuracy of the transmitted time depends on the RDS station that transmits the time signal. Turn off the RDS clock Displays information such as RDS station identity name etc. Turn off the PS function. 6 Play with Bluetooth device You can make or receive phone calls with Bluetooth-enabled phones through the unit.
Tap or to search for phone number from the following list: E n gl i s h 5 Disconnect Bluetooth devices 1 ' $ » (green) is displayed. (red). Tip The device will also be disconnected when the device is moved beyond the operational range.
Switch phone call to the mobile If you do not want your passenger to hear + the mobile. 1 % " . » The voice is transferred from the unit’s loudspeaker to the mobile phone.
Use map E n gl i s h 7 Use navigation system Note You might need to upgrade the navigation map (sold separately) before using it. See “Upgrade the map” section Insert map card Note Navigation map card is not included in the packaging of the car entertainment system. 1 2 Open the card door. Insert the map card into the map card slot. 1 Tap the upper left corner to display main menu. 2 Tap [Navigation]. » The navigation menu is displayed in a few seconds.
8 Adjust sound Adjust volume 1 Turn clockwise to increase volume. Turn anti-clockwise to reduce volume. 3 4 Mute 1 % . ' " again. Tap Tip You can also turn off sound by tapping Tap on the screen.
Tap or to select subwoofer volume. [Sub] subwoofer volume: 0 to 24. 9 Adjust settings 5 Tap F R L R to adjust fader/balance value. [Fade] fader range: +24 to -24. (F = " ¦ " ^ [Balance] balance range: -24 to +24. § ¦ " ¦ " ^ Display system setup menu 1 Tap to display main menu. 6 Tap to exit. Set Dynamic Bass Boost (DBB) 1 Tap to toggle between the settings. E n gl i s h 4 2 Tap in the middle right side of the screen.
General settings [Radio region] [Radio range] Options Description [USA] [S.Amer-1] [Arabia] [China] [S.Amer-2] [Europe] [Korea] [OIRT] [Local] Select one that matches your location. [Distance] [Blackout] [off] [10s] [20s] [Dimmer Mode] [Night] [Dusk] [Normal] [Bright] [Key color] [Red] [Blue] 30 EN General settings [Beep] Options Description [On] Turn on the beep sound. Each time you the unit beeps. Turn off the beep sound. Turn background color to blue.
3 Tap to exit. Adjust video settings 1 Tap [Video]. 2 Tap an option repeatedly to select: Video settings [Aspect ratio] [Video input] Options [Full] Description For widescreen display. [Normal] For normal display. [Auto] The correct format is set automatically. Select this option if you are not sure which format should be selected. Video settings Options Description [NTSC] Used in the United * ª = # £ ' + and some other countries.
Adjust Bluetooth settings 1 Tap [Bluetooth]. Adjust language settings 1 Tap [Language]. 2 2 Tap an option repeatedly to select: Bluetooth Options Description settings [Bluetooth] [On] Turn on the Bluetooth function. [Off] Turn off the Bluetooth function. [Auto [On] If the pre-paired connect] device is within the $ unit re-connects to pre-paired device automatically. [Off] Need to re-connect manually. [Auto [On] Answer paired answer] phone call automatically.
You can set different volume for different modes. 1 Tap [Volume]. » The volume setting sub-menu is displayed. 2 Tap on a source. [DVD] [USB] [SDHC] [Radio] [Bluetooth] [AV-IN1] [AV-IN2] [Navigation] 3 Tap or to assign value: 0 to 12. » < + volume increases automatically. 4 Tap to exit. 2 Tap an option repeatedly to select: DVD rating Options Description [Set Set password to password] restrict the play of discs. The default password is 0000.
10 Others 4 Tap [Rear zone]. » The rear zone options are displayed. 5 Tap [Disc] [USB] or [SDHC] to select a source for your passengers. » The selected source starts play in a few seconds. The passengers can use headphone to listen at the playing. Adjust brightness ' / or . on the Tip < $ / and contrast and saturation.
E n gl i s h Listen to other devices You can connect an external audio/video device to the unit. 1 Connect the car audio to the device with the supplied AV cable. 2 3 4 Tap to display the main menu. Tap [AV-IN1]. Operated the connected the device (see the instructions manual of the device). Tip If you connected the system to other audio device through the REAR OUT L/R connector «* + ¬ ^ [AV-IN2] to listen to that device.
Reset < 1 Press RESET with a ball-point pen or similar tool. Replace fuse Tip < unchanged. Remove the unit + and need to be replaced. 1 2 3 Take out the unit from dashboard. 4 Replace the fuse. Check the electric connection.
Note Product information is subject to change without prior notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Subwoofer output voltage Aux-in level Dimensions (W x H x D) Weight (main unit) Operating temperature range ¡H , %* ¡¡ , ¡K ,^ negative ground 15 A 4-8 50 W x 4 channels 24 W x 4 channels (4 10% T.H.D.) 2.
Bluetooth Communication Bluetooth Standard system version 2.0 Output Bluetooth Standard Power Class 2 Maximum Line of sight approx. 8m communication range Frequency band 2.4 GHz band (2.4000 GHz - 2.
Warning Never remove the casing of this apparatus. ' " + $ $ the system yourself. If you encounter problems when using this " + requesting service. If the problem remains $ # + (www.philips.com/welcome). When you # is nearby and the model number and serial number are available. No power Car engine has not been started. Start the car engine.
About Bluetooth device 13 Glossary Music playback is unavailable on the system even after successful Bluetooth connection. The device cannot be used with the system to play music. B The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. ' $ required for the system.
E n gl i s h Region code A system that allows discs to be played only in the region designated. This unit only plays discs that have compatible region codes. You product label. Some discs are compatible with more than one region (or ALL regions.) S SD Secure Digital.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. CID2680_51_UM_V2.
