User manual

15
English
» [CONNECTED] is displayed if
connection is successful.
» [FAILED] is displayed if connection is
failed.
Make a call
Note
 
connection between the unit and the phone must be
active.
You can dial number through the mobile phone.
To make call through the mobile phone.
1 Use the Mobile Phone to dial and make an
outgoing call.
2 [CALLING] is
displayed.
 To redial number.
1 Press .
» [REDIAL] is displayed.
2 Press / again.
» [CALLING] is displayed and the unit
starts dialing the number dialed last
time.
Call transfer
You can transfer voice from loudspeaker to
mobile phones during call.
Press and hold
until [TRANSFER] is
displayed.
» Voice transfers from loudspeaker to mobile
phone.
5 Use bluetooth
devices


if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
Note
 [BT
MODE] on the unit.
1 Turn on bluetooth function on your device.
2 Search for other bluetooth devices that
can pair with your device.
3 Select “Philips” in the pairing list.
4 Enter default password “0000”.
» [PAIR OK] is displayed on the panel if
pairing is successful.
» The paired device connect to the car
audio system automatically.
 To disconnect the bluetooth
1 Press and hold MENU.
» [BT DISCONN] is displayed.
2 Press / .
» [DISCONN OK] is displaysedif
disconnection is successful.
 To connect the bluetooth
1 Press and hold MENU.
» [BT CONNECT] is displayed.
2 Press / .
» [WAITING] is displayed.
EN