Register your product and get support at www.philips.
1 2 3 4 5 Important 4 Safety Notice 4 4 Your car audio system 6 Introduction What’s in the box Overview of the main unit Overview of the remote control 6 6 7 8 Get started 9 Install the car audio Install remote control battery Turn on Select country/region Set clock 9 12 13 13 13 Listen to radio 14 Tune to a radio station Store radio stations in memory Tune to a preset station 14 14 14 Use bluetooth devices 15 Pairing bluetooth devices Make a call Call transfer Receive call Terminate
1 Important Do not place any sources of danger on the ! " # candles). Safety Read and understand all instructions before you use your apparatus. If damage is % # warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. * # " a safe and comfortable level.
Recycling Your product is designed and manufactured % ! # which can be recycled and reused. When you see the crossed-out wheel bin # product is covered by the European Directive 2002/96/EC: Environmental information All unnecessary packaging has been omitted.
2 Your car audio system : # % [ * # at www.philips.com/welcome.
a b r q c d e p f o n u a SOURCE Select audio source. Display LCD color. m l t d Press to answer or redial a call. Press and hold to transfer call. c MENU Press and hold to access system menu. Return to previous menu. j ih s b k g Access music search in iPod/iPhone mode. / Turn the unit on or off. : Mute or unmute sound. Rotate to adjust volume. ZONE / Select tuner band.
Select MP3/WMA folder. Switch music listening zone. Turn on or off full sound. Enter iPod/iPhone control mode. Eject disc. USB socket. f Press to terminate call. s RESET Restore default settings. t SD card slot u Disc slot g h MP3 LINK Connect external audio device. i r Overview of the remote control 6281' Turn maximizing volume on or off. View clock. a j DBB Turn Dynamic Bass Boost (DBB) sound on or off. Access to tuner auto store.
3 Get started English d SOURCE Select audio source. e EQ Select equalizer (EQ) settings. f OFF / / Turn the unit on or off. Mute or restore volume. Caution Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. ' # % $ model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No.
Note on the power supply lead (yellow) When you connect other devices to this # circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another.
f R RE AR AUX L L R REAR FRONT 2 If you disconnect the car battery in a car that has an on-board drive or # may lose its memory. ' # \ # bare wires do not touch each other.
7 Reconnect the negative terminal of the car battery. Attach the front panel 3m 53.5 mm 18 m 5 Place the supplied rubber cushion over the end of the mounting bolt. 6 Slide the unit into the dashboard until you hear a click sound. 1 2 Attach the trim plate. 3 Press the left side of the panel until the mechanism locks it into place. Insert the right side of the panel in the chassis until it is correctly engaged.
Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. 3 [M-EAST] (Middle East) [ASIA] & ? [JAP] (Japan) [AUST] (Australia) Press English 2 Set clock 1 Press MENU repeatedly until current time ` 2 3 4 5 Rotate Press to set hour. Rotate Press to set minute. Set clock format 1 2 Turn on 3 * # press . * # press and hold turned off.
4 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select radio mode. 2 Press / repeatedly to select band: [FM1]# [FM2]# [FM3]# [AM1]# [AM2] . 3 Press and hold or until the ! ` 4 Press or to tune to a radio station manually. » The radio station is broadcast. To search for a radio station # or . Store radio stations in memory You can store up to six stations in each band.
+ # $ if bluetooth connection is available on your phone or player. » [FAILED] is displayed if connection is failed. Make a call Note * $ # Pairing bluetooth devices You can pair your bluetooth device with the unit as follows: connection between the unit and the phone must be active. You can dial number through the mobile phone. To make call through the mobile phone.
Receive call 1 2 6 Play with RDS ' # is displayed. if the incoming call has no phone # [PHONE IN] is displayed. Press to answer/accept the call. Terminate call Press The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS # Turn on RDS to terminate call. Note The default setting for RDS is on.
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Program type Description NEWS News services AFFAIRS Politics and current affairs INFO Special information programs SPORT Sports EDUCATE Education and advanced training DRAMA Radio plays and literature CULTURE : # and society SCIENCE Science VARIED Entertainment programs POP M Pop music ROCK M Rock music EASY M Light music LIGHT M Light classical music CLASSICS Classical music OTHER M Special music programs WEATHE
[TA OFF]> * not cut in. 7 Play audio files Note Note If the current received TA signal remains weak for JQ # % *& @ $ automatically. The TA Seek will seek for other station with good condition of TA signal. G Play a disc Tip + # press # unit will resume to previous playback mode.
» The unit starts playing from the card automatically. English Tip ' $ # hold until the disc comes out. Play from USB Note Ensure that the USB device contains playable music. Remove the card Insert the USB device 1 Slide the USB socket cover marked the left. 2 Insert the USB device into the USB socket. » The unit starts playing from the USB device automatically. to 1 2 Press 3 Remove the card. to turn the unit off.
iPhone iPhone 3G iPhone 3GS iPhone 4 Connect iPod/iPhone 1 Slide the USB socket cover marked the left. 2 Insert USB adaptor on one end of iPod/ iPhone cable to the USB socket on the main unit. 3 to Insert the other end of the iPod/iPhone cable to the iPod/iPhone socket. » The unit starts playing from the USB device automatically. To control playback under audio control mode: * Z # . * $ $# / .
2 3 Rotate to navigate through all folders. Press to access the selected folder. » * from the selected folder automatically. Tip Connect external sound source 1 Connect the external sound source to MP3 LINK socket with a 3.5 mm cable. 2 Press SOURCE repeatedly until [MP3 LINK] is displayed. 3 Operate the external component (refer to the instructions supplied with the external component). * $ # .
8 Adjust sound Adjust volume Select preset equalizer 1 Press EQ / AUDIO. » Current Equalizer setting is displayed. 2 Press EQ / AUDIO again to select a preset EQ setting: [OPTIMAL] (optimal) [FLAT] ` ? [POP] (pop) [USER] (user) [TECHNO] (techno) [ROCK] (rock) [CLASSIC] (classic) [JAZZ] (jazz) Turn clockwise/counterclockwise to increase/ decrease volume. Mute You can turn off the sound of your audio. H # . * # again.
You can also adjust the preset EQ / AUDIO settings. 1 2 3 Press EQ / AUDIO for 3 seconds. Press or repeatedly to select the item to be adjusted: [SUBWOOFER ON/OFF] : Rotate to turn on or off the subwoofer. [SUBWOOFER] range: 0 to 12. [SUBWOOFER LPF] (Subwoofer low ? > Q# JQ# Q [BALANCE] range: 12L to 12R. $ # $ ? [FADER] range: 12R to 12F. (R=rear $ # $ ? [BASS] range: -7 to +7.
[BLK OUT 20 S] : turn off the screen automatically 20 seconds after last operation. [BLK OUT OFF] : never turn off the screen. [DANCE OFF] : turn the spectrum off. LCD Color Turn demo mode on/off You can select your desired LCD color on this car audio. 1 2 1 2 3 Press and hold MENU. Press or repeatedly until [DEMO] is displayed. » The screen shows current demo mode setting. 3 4 Rotate to select a setting: [DEMO ON] : turn on the demo mode.
You can reset the unit to its default setting. 1 2 10 Additional information English Reset Detach the front panel. Press the reset button by using a ball-point pen or a similar tool. » Preset adjustments such as preset channels and sound adjustments are erased. Detach the front panel You can detach the front panel to deter theft. 1 2 Press 3 Pull the panel towards you to disengage it from the chassis. 4 Store the panel in the supplied carrying case to protect it from dirt or damage.
11 Product information Note Product information is subject to change without prior notice. Power supply Note ' % # internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 1 2 Detach the front panel. Pull out the unit by using the disassembly tools.
Range Standard 0 dBm (Class 2) 2.4000 GHz - 2.4835 GHz ISM Band 3 meters(free space) _ J Q 12 Troubleshooting English Output power Frequency band Caution Never remove the casing of this apparatus.
The CD skips tracks ! Ensure that the CD is not damaged or dirty. ! Ensure that random mode is deactivated. Disc cannot be ejected ! Press and hold . Preset stations lost. ! Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live. Display show ERR-12 ! USB data error. Check the USB device. About Bluetooth device Cannot pair the Bluetooth enabled device with the car audio system. ! * required for the system.
English 13 Glossary M MP3 & % system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio + # :H\ CD-RW can contain about 10 times more data than a regular CD. S SD Secure Digital.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. CEM5100X_78_UM_V1.
