User manual

23
• [USER] (user)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
• [OPTIMAL] (optimal)
Other sound settings
You can also edit user preset EQ.
1 Press EQ repeatedly on the remote
control to select the items to be adjusted:
• [BASS LEVEL] (bass level) range: -7
to +7.
• [BASS CFQ] (bass center frequency)
range: 60H, 80H, 100H, 200H.
• [MIDDLE LEVEL] (middle level)
range: -7 to +7.
• [MIDDLE CFQ] (middle center
frequency) range: 1.0K, 1.5K, 2.5K,
500H.
• [TREBLE LEVEL] (treble level) range:
-7 to +7.
• [TREBLE CFQ] (treble center
frequency) range: 10K, 12.5K, 15K,
17.5K.
• [BALANCE] (balance) range: 12L
to 12R. (L = left speaker, R = right
speaker)
• [FADER] (fader) range: 12R to 12F.
(R = rear speaker, F = front speaker)
• [SUBWOOFER LEVEL] (subwoofer
level) range: 0 to 12
• [SUBWOOFER LPF] (subwoofer
low pass fi lter) range: 80, 120, 160
• [RESUME] (resume): Resume the
preset EQ value to factory default
value.
2 Rotate encoder knob to adjust value.
7 Adjust sound
Adjust volume
Press • VOLUME +/-on the remote control.
Or rotate encoder knob on the front •
panel.
Mute
You can turn off the sound of your audio.
1 During play, press OK/MUTE.
To turn the sound back on, press •
OK/MUTE again.
Turn DBB and subwoofer on/
off
Press • DBB/SUB-W repeatedly to toggle
between the options below:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
Press and hold • DBB/SUB-W to access
the subwoofer settings:
» [SUBWOOFER On]: subwoofer
function is on.
» [SUBWOOFER Off]: subwoofer
function is off.
Select preset equalizer
1 Press EQ/Audio.
The current Equalizer setting is »
displayed.
2 Press EQ/Audio again repeatedly to
select a preset EQ:
• [FLAT] (fl at)
• [POP] (pop)
English
EN