User manual

15
Turn on
1 Press to turn on the unit.
To turn off the unit, press •
for 3
seconds.
Set clock
1 Press MENU repeatedly until [TIME
FORMAT] (time format) displays.
2 Use rotary encoder knob to toggle the
settings:
• [TIME FORMAT 12H]
• [TIME FORMAT 24H]
3 Press or repeatedly until [CLOCK
SET] (clock set) displays.
Hour digits blinks»
4 Set hour with rotary encoder knob.
5 Press OK/MUTE to confi rm.
Minute digits blinks»
6 Set minute with rotary encoder knob.
7 Press to confi rm clock set and exit the
menu.
5 Push the front side of the panel backward to
the main unit a “click” is heard.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fi re. Never discard batteries
in fi re.
Risk of decreased battery life! Never mix
•
different brands or types of batteries.
Risk of product damage! When the remote
•
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
•
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For fi rst-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
English
EN