Quick start guide

Turn on
To turn on the unit,
 Press
.
To turn off the unit,
 press and hold
until the unit is turned off.
Select country/region
1 Press to turn on the unit.
» [SELECT OPERATING REGION] is displayed.
2 Rotate to select an option:
 [USA] (United States)
 [LATIN] (Latin America)
 [EUROPE] (Western Europe)
 [RUS] (Russia)
 [M-EAST] (Middle East)
 [ASIA]
 [JAP] (Japan)
 [AUST] (Australia)
3 Press 
Set clock
1 Press MENU
2 Rotate to set hour.
3 Press 
4 Rotate to set minute.
5 Press 
Tune to a radio station
1 Press SOURCE repeatedly to select radio mode.
2 Press BAND or / repeatedly to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] .
3 Press and hold or 
4 Press or to tune to a radio station manually.
» The radio station is broadcast.
 To search for a radio station automatically, press
or .
Store stations automatically
1 In Radio mode, press and hold DBB until [STORE - - -] is displayed.
2 Press 
» The six strongest stations of the selected band are saved in preset channel automatically.
Store stations manually
1 Tune to a station that you want to store.
2 Press a numeric button for 3 seconds.
» The station is saved in the selected channel.
Play from USB
1
Slide the USB socket cover marked to the left.
2 Insert the USB device into the USB socket.
» The unit starts playing from the USB
device automatically.
Connect iPod/iPhone
1
Slide the USB socket cover marked to the left.
2 Insert USB adaptor on one end of iPod/iPhone cable
to the USB socket on the main unit.
3 Insert the other end of the iPod/iPhone cable to the
iPod/iPhone socket.
» The unit starts playing from the USB device automatically.
Reset
You can reset the unit to its default setting.
1 Detach the front panel.
2 Press the reset button by using a ball-point pen
or a similar tool.
» Preset adjustments such as preset channels and
sound adjustments are erased.
What’s in the box
Main unit
(with a sleeve)
Remote
control
Front panel Trim plate Carrying case for
front panel
ISO male connector Screw
x 1 pc
Rubber cushion Disassembly tools
x 2 pcs
User manual Quick start guide
f
g
h
i
REAR
FRONT
R
L
REAR A UX
LR
j
1 Connect the supplied male connector to the unit.
2 Check the car’s wiring carefully and connect them
to the the supplied male connector.
1 Green/black strip Left speaker (Rear)
2 White/black strip Left speaker (Front)
3 Gray/black strip Right speaker (Front)
4 Purple/black strip Right speaker (Rear)
e Red Ignition key +12V DC when
ON/ACC
f Blue Motor/electric antenna relay
control lead
g Blue/white 
hBlack Ground
i Yellow To the +12V car battery which
is energized at all times
3 
applicable.
Connector Connect to
1 ANTENNA Antenna
2 FRONT LINE OUT R
(Socket)
Front right speaker
3 FRONT LINE OUT L
(Socket)
Front left speaker
4 REAR LINE OUT R
(Socket)
Rear right speaker
5 REAR LINE OUT L
(Socket)
Rear left speaker
6 OE REMOTE (Purple) OE Remote
7TEL MUTING (Blue) To cellular phone
system
8 SUBWOOFER (Blue) Subwoofer
9 REAR AUX LINE OUT R Rear Aux right
10 REAR AUX LINE OUT L Rear Aux left
Connection: for cars with ISO connectors
Á Quick start guide
CEM3100_05_QSG_V1.0.indd 2 2012-3-9 16:39:21