Register your product and get support at: Car Entertainment System CEM220 EN User manual ZH-HK Ԛ͂ʹ˫ ZH-CN Ⴌ߀൱Ҭ
1 Important 2 2 2 2 Your car audio system 4 4 4 5 Safety Notice Introduction What’s in the box Overview of the main unit 3 Get started Install the car audio Turn on Set clock 4 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station 5 Play audio files Play a disc Play from USB/SD/SDHC/MMC device Control play Search for an MP3/WMA track View play information Intro play Shuffle play Repeat play Connect external sound source 7 7 11 11 13 13 13 13 14 14 14 15 15 15
1 Important Safety • • • • • • • • • • • • Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
Engl i s h Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
a b c d s x w v e f r g q Select tuner band. Select MP3/WMA folder. Scroll up or down menu. b DBB • Turn on or off Dynamic Bass Boost (DBB) sound. c SOURCE • Select audio source. d /MUTE • Turn the unit on or off. • Adjust volume. • Confirm selection. k j t a • • • h i p o n m l u Engl i s h Overview of the main unit • • Enter characters for search. Mute or restore volume. e MENU / DISP • Display radio frequency, clock and radio program type (if available).
h • Unlock the panel i USB socket j External device socket k 6 • Select preset station no. 6 l 5 • Select preset station no. 5 m SHUF, 4 • Activate or deactivate shuffle mode. • Select preset station no. 4 n 3, REP • Set repeat play mode. • Select preset station no. 3 o INTRO, 2 • Turn intro play on or off. • Select preset station no. 2 p 1, • • • q Start play Pause or resume play. Select preset station no. 1 / • • Tune to a radio station Skip/search for a track.
Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No.
Connection: for cars with ISO connectors 3 Connect the antenna and amplifier as illustrated, if applicable. Caution • Ensure that all loose leads are insulated with electrical A tape. 1 Pull out the ISO connectors from car dashboard and connect them to the bigger end of the supplied standard connector. B A a 2 A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 Connect the other end of the supplied standard connector to the unit.
Connect the antenna and amplifier as illustrated, if applicable. A B B Engl i s h 1 a A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 a b c A a Connector b c h c a a b b c c d d d d e g b f i d Connect to 1 REAR LINE OUT R Rear right speaker 2 REAR LINE OUT L Rear left speaker 3 SUB OUT Subwoofer 4 ANTENNA Antenna 2 Cut off the bigger end of the supplied standard connector. 3 Check the car’s wiring carefully and connect them to the supplied standard connector.
Connect the supplied standard connector to the unit. 4 Ensure that car dashboard opening is within these measurements: Mount in the dashboard 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory. • If the car battery is not disconnected, to avoid short-circuit, ensure that bare wires do not touch each other.
Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Attach the front panel 1 Attach the trim plate. 2 Insert the right side of the panel in the chassis until it is correctly engaged. 3 Press the left side of the panel and point the left hole at the left pillar. 4 Release the panel to engage the left side. Engl i s h 5 Note • Skip this step if the unit is not fixed by sleeve but by supplied screws.
View clock 1 Press MENU/DISP repeatedly until the clock is displayed.
Store radio stations in memory Tune to a radio station You can store up to 6 stations in each band. 1 2 Press SOURCE repeatedly to select Tuner. Store stations automatically Press or to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] . 1 3 Press or to tune to a radio station manually. » The radio station is broadcast. » To search for a radio station automatically, press or for 3 seconds.
5 Play audio files Play from USB/SD/SDHC/ MMC device Note Note • Ensure that the disc or device contains playable files. • Ensure that the USB or SD/SDHC/MMC device contains playable music. Play a disc Insert the USB device 1 Open the cover marked front panel. 2 Insert the USB device into the USB socket. » The unit starts playing from the USB device automatically. Note on the • You cannot play CDs encoded with copyright protection technologies.
Note • This unit supports SD, SDHC, and MMC cards. 1 2 Press Search for an MP3/WMA track 1 Press SEARCH for 3 seconds. » Search menu is displayed. » [FILE]: search by track name. to release the panel. Insert the card into the card slot. » The unit starts playing from the card automatically. Engl i s h Insert a card » [FOLDER]: search by folder sequence. 2 Turn to select [FILE] and then press to confirm. 3 Turn press 4 Repeat step 3 until the search term is complete.
Shuffle play You can play the tracks in random order. 1 During play, press SHUF, 4 to select: • [SHUF ON]: start shuffle play for all tracks. • [SHUF OFF]: cancel shuffle play. Repeat play 1 • • • During play, press 3, REP repeatedly to select: [RPT 1] (repeat one track): play the current track repeatedly. [RPT FOLD] (repeat a folder): play all tracks in the current folder repeatedly. [RPT ALL] (repeat all tracks): play all tracks repeatedly.
Other sound settings Engl i s h 6 Adjust sound You can also edit user preset EQ. Adjust volume 1 1 2 Turn clockwise/anticlockwise to increase/decrease volume. Mute You can turn off the sound of your audio. 1 During play, press MUTE . • To turn the sound back on, press MUTE again. Turn Dynamic Bass Boost (DBB) on/off 1 Press DBB for 3 seconds, the current setting is displayed: » [DBB ON] : The Dynamic Bass Boost (DBB) function is on. » [DBB OFF] : The DBB function is off.
7 Adjust system settings Change button backlight color You can change button backlight color from blue to red or vice versa. Select blackout setting You can set the screen to turn off automatically after the unit is idle for 10 or 20 seconds. 1 2 3 Press MENU/DISP for 3 seconds. Turn to select a setting: • [BKO 10 S] : Turn off the screen automatically 10 seconds after last operation. • [BKO 20 S] : Turn off the screen automatically 20 seconds after last operation.
Select shock-protect setting Each time you press a button, the unit beeps. You can turn off/on this beep sound. Press MENU/DISP for3 seconds. You can select the shock protection setting, depending on the stability of your car and the condition of the road. Press or repeatedly to until [BEEP ON] or [BEEP OFF] is displayed. 1 2 Rotate to select a setting: • [BEEP ON]: Turn on the beep sound. • [BEEP OFF]: Turn off the beep sound.
8 Additional information 3 Replace the fuse. A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 Detach the front panel You can detach the front panel to deter theft. 1 2 Press to release the panel. Press the left side of the panel rightward. FUSE 15A Note • If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 1 2 3 Pull the panel towards you to detach it from the chassis.
Note • Product information is subject to change without prior notice. Power supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A Suitable speaker impedance 4-8 Maximum power output 50 W x 4 channels Continuous power output 24 W x 4 channels (4 10% T.H.D.) Pre-Amp output voltage 2.0 V ( USB play mode; 1 kHz, 0 dB, 10 k load) Subwoofer output voltage 2.0 V (USB play mode: 61 Hz, 0 dB, 10 k load) Aux-in level 300 mV Dimensions (W x H x D) 188 x 58 x 190mm Weight 1.
10 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available. No power or no sound. • Car engine is not on.
Engl i s h 11 Glossary M MMC MultimediaCard. A type of memory card with a flash memory. MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. S SD Secure Digital. A type of memory card with a flash memory. SDHC Secure Digital High Capacity (SDHC) is a type of flash memory card based on the SDA 2.00 specification. The SDA 2.
24 EN
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
