Always there to help you Register your product and get support at www.philips.com/welcome CEM2101 Question? Contact Philips User manual 1 Manual del usuario 23 Manual do utilizador 45 CEM2101_10_UM_V1.0.
1 Important 2 Safety Notice 2 2 2 Your car audio system Introduction What's in the box Overview of the main unit 3 Get started Install the car audio Turn on Select country/region Set clock 3 3 4 5 6 6 9 9 10 4 Listen to radio 10 10 11 11 11 5 Play audio files 13 13 14 14 15 6 Adjust sound 15 15 15 15 15 16 16 16 Tune to a radio station Store radio stations in memory Tune to a preset station Play with RDS Play a disc Play from USB Play options Connect external sound source Adjust volume Mute
1 Important Safety • • • • • • • • • • • • Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
a What's in the box Check and identify the contents of your package: a Main unit (with a sleeve) b Front panel b d c c Trim plate d Carrying case for front panel e ISO male connector e f g f Rubber cushion g Screw x 1 pc h Disassembly tools x 2 pcs h i i User manual 4 EN CEM2101_10_UM_V1.0.
a b r q c d e p f o n m l t a SOURCE • Select audio source. b MENU • Access system menu. c d • • • • • Return to previous menu. / Turn the unit on or off. Confirm selection. Mute or unmute sound. Rotate to adjust volume. k g j i h s e ZONE / • Select tuner band. • Select MP3/WMA folder. • Switch music listening zone. f g • Eject disc. • USB socket. h MP3 LINK • Connect external audio device. EN CEM2101_10_UM_V1.0.
i 6281' • • Turn on or off Maximizing volume. View clock. j DBB • Turn on or off Dynamic Bass Boost (DBB) sound. • Access to tuner auto store. k • • • Select preset radio station No.6. Start play. Pause or resume play. l REP / SHUF • Select preset radio station No.3/4. • Access to repeat play. • Access to shuffle play. m n • • / • • • Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus.
English Note on the power supply lead (yellow) • When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection • Never connect speaker wires to the metal body or chassis of the car. • Never connect speaker wires with stripes to one another. Connection: for cars with ISO connectors Caution •• Ensure that all loose leads are insulated with electrical tape.
3 Connect the antenna and amplifier as illustrated, if applicable. 2 Ensure that car dashboard opening is within these measurements: m 5m mm 53mm 183 3 1 2 3 4 Connector Connect to ANTENNA REAR LINE OUT R (Socket) REAR LINE OUT L (Socket) OE REMOTE (Purple) Antenna Rear right speaker Rear left speaker Remove the mounting sleeve with the supplied disassembly tools. OE Remote Tip •• The pin arrangement for the ISO connectors depends on the type of vehicle you drive.
1 2 3m 53.5 mm 18 5 6 m 3 English Attach the front panel Attach the trim plate. Insert the right side of the panel in the chassis until it is correctly engaged. Press the left side of the panel until the mechanism locks it into place. Place the supplied rubber cushion over the end of the mounting bolt. Turn on Slide the unit into the dashboard until you hear a click sound. To turn on the unit, •• Press . To turn off the unit, •• press and hold off.
2 3 Rotate to select an option: • [USA] (United States) • [LATIN] (Latin America) • [EUROPE] (Western Europe) • [RUS] (Russia) • [M-EAST] (Middle East) • [ASIA] (Pacific) • [JAP] (Japan) • [AUST] (Australia) Press to confirm. Set clock 1 2 3 4 5 Press MENU repeatedly until current time is flashed. Rotate Press to set hour. to confirm. Rotate Press to set minute. 3 Tune to a radio station 1 2 3 4 • to confirm. Set clock format 1 2 4 Listen to radio Press MENU.
To receive more radio stations or only stations with strong signal, you can adjust the tuner sensitivity. 1 2 Press MENU repeatedly until [LOCAL] is displayed. Rotate to select a setting: • [LOCAL ON] (local on): only stations with strong signal can be broadcast. • [LOCAL OFF] (local off): stations with strong and weak signals can be broadcast. Store radio stations in memory You can store up to 6 stations in each band.
Item Program type 7 CULTURE 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Description Culture, religion and society SCIENCE Science VARIED Entertainment programs POP M Pop music ROCK M Rock music EASY M Light music LIGHT M Light classical music CLASSICS Classical music OTHER M Special music programs WEATHER Weather FINANCE Finance CHILDREN Children’s programs SOCIAL Social Affairs RELIGION Religion PHONE IN Phone In TRAVEL Travel LEISURE Leisure JAZZ Jazz Music COUNTRY Country
You can use time signal that is broadcast together with the RDS signal to set the clock of the unit automatically. 1 2 3 Press MENU. Press or displayed. 5 Play audio files English Set RDS clock Note •• Ensure that the disc or device contains playable files. repeatedly until [CT] is Rotate to select a setting: • [CT ON]: turn on the RDS clock. Time shown on the unit synchronizes with that on the RDS station. • [CT OFF]: turn off the RDS clock.
2 3 Play from USB Note Rotate to navigate through all folders. Press to access the selected folder. »» The unit starts playing the first song from the selected folder automatically. •• Ensure that the USB device contains playable music. Tip •• To go back to upper level of a folder, press Insert the USB device 1 2 Slide the USB socket cover marked the left. to Insert the USB device into the USB socket. »» The unit starts playing from the USB device automatically. .
1 2 3 Connect the external sound source to MP3 LINK socket with a 3.5 mm cable. Press SOURCE repeatedly until [MP3 LINK] is displayed. Operate the external component (refer to the instructions supplied with the external component). 6 Adjust sound English Connect external sound source Adjust volume Turn clockwise/counterclockwise to increase/ decrease volume. Mute You can turn off the sound of your audio. During play, press . •• To resume sound, press again.
Select preset equalizer Other sound settings 1 You can also adjust the preset EQ / AUDIO settings. 2 Press EQ / AUDIO. »» Current Equalizer setting is displayed. Press EQ / AUDIO again to select a preset EQ setting: • [OPTIMAL] (optimal) • [FLAT] (flat) • [POP] (pop) • [USER] (user) • [TECHNO] (techno) • [ROCK] (rock) • [CLASSIC] (classic) • [JAZZ] (jazz) 1 2 3 Press EQ / AUDIO for 3 seconds. Press or repeatedly to select the item to be adjusted: • [BAS] (bass) range: -7 to +7.
Turn beep sound on/off Dance You can turn on or off the spectrum on the LCD display. 1 2 3 Each time you press a button, the unit beeps. You can turn this beep sound on or off. 1 2 3 3 Press MENU. Press or displayed. repeatedly until [DANCE] is Rotate to select a setting: • [DANCE ON]: turn the spectrum on. • [DANCE OFF]: turn the spectrum off. Press MENU. Press or displayed. repeatedly until [BEEP] is Rotate to select a setting: • [BEEP ON]: turn the beep sound on.
8 Additional information 3 Replace the fuse. Detach the front panel You can detach the front panel to deter theft. 1 2 Press to release the panel. Pull the panel towards you to disengage it from the classis. Note •• If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 3 Store the panel in the supplied carrying case to protect it from dirt or damage. 1 2 Detach the front panel.
Note •• Product information is subject to change without prior notice. Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 21 W x 4 RMS 2.5V 500 mV 181.5 x 52 x 191.4 mm 1.47 kg Radio Frequency range - FM Frequency range AM(MW) Usable sensitivity - FM Usable sensitivity - AM (MW) 87.5 - 108.
10 Troubleshooting Caution •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
English 11 Glossary M MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. R RDS (Radio Data System) RDS tuners can automatically tune in stations according to the types of music (or talk) they broadcast.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. CEM2101_10_UM_V1.0 CEM2101_10_UM_V1.0.
